main
Ray
ld7576gs: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
6802cf3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "ld7576gs",
"version": "0.1.0",
"type": "component",
"description": "Leadtrend Tech AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"ld7576gs"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ld7576gs.kicad_sym",
"ld7576gs.kicad_mod",
"ld7576gs.glb",
"ld7576gs.step",
"ld7576gs.lbr",
"docs/hero.png",
"docs/ld7576gs-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ld7576gs-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "LD7576GS",
"manufacturer": "Leadtrend Tech",
"package": "SOP-8",
"pin_count": 8,
"category": "AC-DC Controllers and Regulators",
"parts": {
"symbol": "ld7576gs.kicad_sym",
"footprint": "ld7576gs.kicad_mod",
"model_3d": "ld7576gs-etched.glb",
"model_3d_plain": "ld7576gs.glb",
"model_3d_step": "ld7576gs-etched.step",
"model_3d_step_plain": "ld7576gs.step",
"lbr": "ld7576gs.lbr"
},
"pins": [
{
"number": "1",
"name": "CT",
"type": "input",
"description": "Programs the low-frequency timer / OLP delay time via an external capacitor to GND (recommended 0.047 µF to 0.1 µF, X7R; ~45 mS delay at 0.047 µF, ~110 mS at 0.1 µF). Also serves as a latch-mode trigger: pulling this pin below 0.8 V latches the controller off until AC power is recycled."
},
{
"number": "2",
"name": "COMP",
"type": "input",
"description": "Voltage feedback pin (analogous to UC384X COMP). Driven by an opto-coupler from the secondary-side TL431 to close the regulation loop. Requires ≥102 pF X7R ceramic cap; open-loop voltage ~5.6 V; green-mode threshold ~2.35 V; OLP trip level 5.0 V; pulling below 1.2 V disables the gate output."
},
{
"number": "3",
"name": "CS",
"type": "input",
"description": "Current sense pin for the primary MOSFET current. Maximum input threshold 0.85 V (typ), 230 nS internal leading-edge blanking, ~1 MΩ input impedance, 100 nS delay to output. Absolute max -0.3 V to +7 V; an external R-C filter is recommended for high-power designs to suppress negative turn-on spikes."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device ground return for all internal circuitry and the gate driver. Should have a short, low-inductance layout back to the CT capacitor and CS sense resistor."
},
{
"number": "5",
"name": "OUT",
"type": "output",
"description": "Gate drive output for the external power MOSFET. CMOS totem-pole buffer with typical 500 mA source/sink capability; typical rise/fall 50 nS / 30 nS into 1 nF; maximum duty-cycle 75%. Absolute max -0.3 V to Vcc+0.3 V; includes an internal anti-floating pull-low resistor."
},
{
"number": "6",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage for the controller. Recommended operating range 11 V to 25 V (absolute max 30 V); UVLO(on) 16 V typ, UVLO(off) 10 V typ; OVP trip 28 V typ. Bypass with 10 µF to 47 µF; startup current <100 µA while the HV pin charges this rail."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No-connect. Present on the SOP-8 / DIP-8 packages only (absent from the SOP-7 variant). Leave floating."
},
{
"number": "8",
"name": "HV",
"type": "input",
"description": "High-voltage startup input; connect to the positive terminal of the bulk (rectified DC) capacitor through a recommended 40 kΩ current-limit resistor. Sources ~1 mA (typ) into Vcc during startup and shuts off once Vcc trips UVLO(on) to eliminate steady-state startup losses. Absolute max 600 V; off-state leakage <35 µA at 500 V."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C5124414",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:03:11Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "ld7576gs.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ld7576gs-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "43d01b3dc96d2fec9b3765521a1e2b5f76a86a2ff04fb69d6121e1504a093a36",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}