← Commit history

Set visibility: public

Ray ·bfb1b2dd49 · ·parent 6a651fc
1 file changed +8−5
page.json+8−5
@@ -44,13 +44,13 @@         "number": "3",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage input (Abs Max 30V). UVLO turn-on 16V, turn-off 10V. OVP trips at 28.0V (auto-recovery, hiccup). Startup current <20\u00b5A; operating current ~2.0-3.0mA. Pin 3 and Pin 7 are internally the same VCC node."+        "description": "Supply voltage input (Abs Max 30V). UVLO turn-on 16V, turn-off 10V. OVP trips at 28.0V (auto-recovery, hiccup). Startup current <20µA; operating current ~2.0-3.0mA. Pin 3 and Pin 7 are internally the same VCC node."       },       {         "number": "4",         "name": "RT",         "type": "input",-        "description": "Oscillator programming pin. Connect a resistor from RT to GND to set the switching frequency: fSW(kHz) = 65 \u00d7 100k\u03a9 / RT(k\u03a9). Recommended operating range 50-130kHz; typical 65kHz at RT=100k\u03a9. RT short-to-ground or RT-floating triggers fault protection."+        "description": "Oscillator programming pin. Connect a resistor from RT to GND to set the switching frequency: fSW(kHz) = 65 × 100kΩ / RT(kΩ). Recommended operating range 50-130kHz; typical 65kHz at RT=100kΩ. RT short-to-ground or RT-floating triggers fault protection."       },       {         "number": "5",@@ -62,7 +62,7 @@         "number": "6",         "name": "CS",         "type": "input",-        "description": "Current-sense input from the primary MOSFET source resistor (Rs). Maximum threshold 0.85V (Ipeak_max = 0.85V / Rs). 350ns leading-edge blanking (LEB) suppresses turn-on spikes; 1M\u03a9 input impedance, ~100ns delay to output. Abs Max -0.3 to +7V. Pin-floating triggers fault protection."+        "description": "Current-sense input from the primary MOSFET source resistor (Rs). Maximum threshold 0.85V (Ipeak_max = 0.85V / Rs). 350ns leading-edge blanking (LEB) suppresses turn-on spikes; 1MΩ input impedance, ~100ns delay to output. Abs Max -0.3 to +7V. Pin-floating triggers fault protection."       },       {         "number": "7",@@ -74,7 +74,7 @@         "number": "8",         "name": "OUT",         "type": "output",-        "description": "CMOS gate-drive output for the external power MOSFET. Typical 500mA source/sink capability. Output-high \u2248 VCC-6V (>9V at VCC=15V, Io=20mA); output-low <1V. Rise time \u224850ns, fall time \u224830ns into 1nF. Maximum duty cycle limited to 75% to prevent transformer saturation."+        "description": "CMOS gate-drive output for the external power MOSFET. Typical 500mA source/sink capability. Output-high ≈ VCC-6V (>9V at VCC=15V, Io=20mA); output-low <1V. Rise time ≈50ns, fall time ≈30ns into 1nF. Maximum duty cycle limited to 75% to prevent transformer saturation."       }     ],     "provenance": {@@ -138,5 +138,8 @@     "docs/ld7552bps-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file