← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# LD7552BPS++**Leadtrend Tech** · AC-DC Controllers and Regulators · SOP-8++LD7552BPS from Leadtrend Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Device ground return. Reference for VCC, gate driver source current, and current-sense signal. |+| 2 | COMP | input | Voltage feedback / loop compensation pin (equivalent to the COMP pin in UC384X). A secondary-side TL431 drives an opto-coupler that pulls this pin to close the regulation loop. Internal 6.0V open-loop voltage with 1/3 divider and 2 diode offsets feeds the PWM comparator. OLP trips when VCOMP exceeds 5.0V for >60ms (at 65kHz); pulling below 1.2V shuts off the output. |+| 3 | VCC | power_in | Supply voltage input (Abs Max 30V). UVLO turn-on 16V, turn-off 10V. OVP trips at 28.0V (auto-recovery, hiccup). Startup current <20µA; operating current ~2.0-3.0mA. Pin 3 and Pin 7 are internally the same VCC node. |+| 4 | RT | input | Oscillator programming pin. Connect a resistor from RT to GND to set the switching frequency: fSW(kHz) = 65 × 100kΩ / RT(kΩ). Recommended operating range 50-130kHz; typical 65kHz at RT=100kΩ. RT short-to-ground or RT-floating triggers fault protection. |+| 5 | NC | unconnected | No-connect pin. Leave floating or tie to GND per PCB-layout preference. |+| 6 | CS | input | Current-sense input from the primary MOSFET source resistor (Rs). Maximum threshold 0.85V (Ipeak_max = 0.85V / Rs). 350ns leading-edge blanking (LEB) suppresses turn-on spikes; 1MΩ input impedance, ~100ns delay to output. Abs Max -0.3 to +7V. Pin-floating triggers fault protection. |+| 7 | VCC | power_in | Supply voltage pin (same VCC net as pin 3). Bonded to pin 3 internally; both should be tied together at the VCC bypass capacitor to share bond-wire current for the 500mA gate driver. |+| 8 | OUT | output | CMOS gate-drive output for the external power MOSFET. Typical 500mA source/sink capability. Output-high ≈ VCC-6V (>9V at VCC=15V, Io=20mA); output-low <1V. Rise time ≈50ns, fall time ≈30ns into 1nF. Maximum duty cycle limited to 75% to prevent transformer saturation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Leadtrend Tech |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LD7552BPS`+- `LD7552BPSGS`+- `LD7552BPSPN`++## CAD (KiCad official)++- Symbol: `LD7552BPS`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Leadtrend Tech datasheet](docs/ld7552bps-datasheet.pdf) (None pp, sha256 `fff64f619363d956`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ld7552bps-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ld7552bps",+ "version": "0.1.0",+ "type": "component",+ "description": "Leadtrend Tech AC-DC Controllers and Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "ld7552bps"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ld7552bps.kicad_sym",+ "ld7552bps.kicad_mod",+ "ld7552bps.glb",+ "ld7552bps.step",+ "ld7552bps.lbr",+ "docs/hero.png",+ "docs/ld7552bps-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}