main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ld7515agl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ld7515agl: viewers · Ray
ld7515agl-etched.fit.json ld7515agl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ld7515agl-etched.glb ld7515agl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ld7515agl-etched.step ld7515agl: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ld7515agl.glb Publish 0.1.0 · Ray
ld7515agl.kicad_mod Publish 0.1.0 · Ray
ld7515agl.kicad_sym Publish 0.1.0 · Ray
ld7515agl.lbr Publish 0.1.0 · Ray
ld7515agl.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ld7515agl: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ld7515agl: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LD7515AGL

Leadtrend Tech · AC-DC Controllers and Regulators · SOT-26

LD7515AGL from Leadtrend Tech, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage pin. Operating range 4.8 V to 16 V (absolute max 20 V). UVLO ON at ~13 V, OFF at ~4 V; OVP trips at ~18 V. Requires a 0.1-0.47 uF ceramic bypass placed close to the pin.
2 GND power_in Device ground reference.
3 FB input Auxiliary winding voltage sense and Quasi-Resonant detection input. Provides primary-side feedback for CV regulation, QRD trip level ~300 mV (100 mV hysteresis) and FB under-voltage protection at ~1.0 V. Absolute max -0.3 V to 3.3 V.
4 CS input Current sense pin; connect to the emitter/source sense resistor to monitor the switch current. VCS max clamp ~1 V, minimum ~0.15 V; internal leading-edge blanking of ~650 ns. Absolute max -0.3 V to 3.3 V.
5 COMP output Error amplifier output for loop voltage compensation. Internal 2.0 V reference, gm ~85 uA/V, upper clamp ~3.0 V. Requires an external compensation capacitor (470-4700 pF). Absolute max -0.3 V to 3.3 V.
6 OUT output Base drive output for the external BJT power switch. Delivers up to ~60 mA base current (Ib-max), max on-time ~13 us, switching frequency up to 75 kHz. Absolute max -0.3 V to 3.3 V.

Key specifications

Parameter Value
Manufacturer Leadtrend Tech
Package SOT-26
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • LD7515AGL

CAD (KiCad official)

  • Symbol: LD7515AGL
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-26 (KiCad packages3D, STEP)
  • 3D model files: ld7515agl-etched.step / ld7515agl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld7515agl.step / ld7515agl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Leadtrend Tech datasheet (14 pp, sha256 a967313cbb2f125f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF