3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLD49300PT08R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
LD49300PT08R from STMicroelectronics, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Adjustable regulator feedback input connected to the resistor voltage divider; output is set between 0.8 V and 4.5 V using R1 from VOUT and R2 to GND, with R1 preferably below 10 kΩ (up to 100 kΩ suitable). |
| 2 | VIN | power_in | Input voltage of the regulator, operating range 1.4 V to 5.5 V (absolute maximum -0.3 V to 7 V). |
| 3 | GND | power_in | Ground pin; the package tab is also connected to ground and is soldered to the PCB copper plane for heatsinking. |
| 4 | VOUT | power_out | Regulator output, 0.8 V to 4.5 V for the adjustable version; output capacitor should be placed as close as possible to this pin. |
| 5 | VBIAS | power_in | Bias supply powering the control circuitry (except the output power device), operating range 3 V to 6 V and must be at least 2.1 V above VOUT. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-252-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VIN | -0.3 | 7 | V | 7 | ||
| Output voltage (absolute maximum), upper limit VIN + 0.3 | VOUT | -0.3 | V | Upper limit VIN + 0.3 | 7 | ||
| Output voltage (absolute maximum), upper limit VBIAS + 0.3 | VOUT | -0.3 | V | Upper limit VBIAS + 0.3 | 7 | ||
| Bias supply voltage (absolute maximum) | VBIAS | -0.3 | 7 | V | 7 | ||
| Enable input voltage (absolute maximum) | VEN | -0.3 | 7 | V | 7 | ||
| Storage temperature range | TSTG | -50 | 150 | °C | 7 | ||
| Supply voltage (operating) | VIN | 1.4 | 5.5 | V | 7 | ||
| Output voltage (operating) | VOUT | 0.8 | 4.5 | V | 7 | ||
| Bias supply voltage (operating) | VBIAS | 3 | 6 | V | 7 | ||
| Enable input voltage (operating), upper limit VBIAS | VEN | 0 | V | Upper limit VBIAS | 7 | ||
| Junction temperature range (operating) | TJ | -25 | 125 | °C | 7 | ||
| Output voltage accuracy | VO | -3 | 3 | % | TJ = -25 °C to 125 °C | 8 | |
| Reference voltage | VREF | 0.788 | 0.8 | 0.812 | V | TJ = 25 °C | 8 |
| Reference voltage | VREF | 0.776 | 0.8 | 0.824 | V | TJ = -25 °C to 125 °C | 8 |
| Line regulation | VLINE | -0.1 | 0.1 | %/V | VI = VO + 1 V to 5.5 V | 8 | |
| Load regulation | VLOAD | 1 | % | IL = 0 mA to 3 A, VBIAS ≥ 3 V | 8 | ||
| Dropout voltage (VI - VO) | VDROP | 200 | mV | IL = 1.5 A | 8 | ||
| Dropout voltage (VI - VO) | VDROP | 400 | mV | IL = 3 A | 8 | ||
| Dropout voltage (VBIAS - VO) | VDROP | 1.5 | 2.1 | V | IL = 3 A | 8 | |
| Ground pin current | IGND | 4 | 6 | mA | IL = 0 mA | 8 | |
| Current through VBIAS | IVBIAS | 3 | 5 | mA | IL = 0 mA | 8 | |
| Current limit | IL | 4.5 | A | VO = 0 V | 8 | ||
| Supply voltage rejection | SVR | 68 | dB | VI = 2.5 V ± 0.5 V, VO = 1 V, F = 120 Hz, VBIAS = 3.3 V | 8 |
CAD (KiCad official)
- Symbol:
LD49300PT08R - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
ld49300pt08r-etched.step/ld49300pt08r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld49300pt08r.step/ld49300pt08r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (23 pp, sha256
6a15b666e3e12de5, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).