main
History Download
Ray Initial commit: component/ld39200dpur 540417a

LD39200DPUR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-8(4x4)

LD39200DPUR from STMicroelectronics, in a DFN-8(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output voltage; both output pins 1 and 2 must be connected together on the board.
2 OUT power_out Output voltage; both output pins 1 and 2 must be connected together on the board.
3 ADJ/SENSE input Adjustable pin connected to external resistor divider to set output voltage from 0.5 V.
4 GND power_in Ground reference.
5 PG output Power good output flag with open-drain driver; high impedance when VOUT > 0.92VOUT, low impedance when VOUT < 0.80VOUT.
6 EN input Enable logic input; device ON when voltage > 1.2 V, OFF when voltage < 0.5 V, draws 10 nA typical.
7 IN power_in Input supply voltage with 1.25 V to 6.0 V operating range; both input pins 7 and 8 must be connected together on the board.
8 IN power_in Input supply voltage with 1.25 V to 6.0 V operating range; both input pins 7 and 8 must be connected together on the board.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DFN-8(4x4)
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: LD39200DPUR
  • Footprint: Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm
  • 3D model: DFN-8(4x4) (KiCad packages3D, STEP)
  • 3D model files: ld39200dpur-etched.step / ld39200dpur-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld39200dpur.step / ld39200dpur.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (29 pp, sha256 bf78be23c8fe690a, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF