component
LD39020ADTPU30R
Public Made by Adomby adom
STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-4(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLD39020ADTPU30R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4(1x1)
LD39020ADTPU30R from STMicroelectronics, in a DFN-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage regulated at 3.0 V ±0.5% with 200 mA maximum current capability and typical 200 mV dropout at full load. |
| 2 | GND | power_in | Common ground for signal return path. |
| 3 | EN | input | Logic input for enable/shutdown: Low (≤0.4 V) puts device in shutdown; High (≥1 V) activates regulation with 20 µA typical quiescent current at no load. |
| 4 | IN | power_in | Input supply voltage 1.5 V to 5.5 V requiring 1 µF minimum external ceramic capacitor (X5R or X7R type). |
| 5 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-4(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LD39020ADTPU30R - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4(1x1) (KiCad packages3D, STEP)
- 3D model files:
ld39020adtpu30r-etched.step/ld39020adtpu30r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld39020adtpu30r.step/ld39020adtpu30r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (30 pp, sha256
e4097fa7d6a209f5, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).