component
LD2985G-50-AF5-R
Public Made by Adomby adom
UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| ld2985g-50-af5-r-etched.glb | 21d ago |
| ld2985g-50-af5-r-etched.step | 21d ago |
| ld2985g-50-af5-r-hero.glb | 21d ago |
| ld2985g-50-af5-r-hero.overlay.json | 21d ago |
| ld2985g-50-af5-r.glb | 21d ago |
| ld2985g-50-af5-r.kicad_mod | 21d ago |
| ld2985g-50-af5-r.kicad_sym | 21d ago |
| ld2985g-50-af5-r.lbr | 21d ago |
| ld2985g-50-af5-r.step | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
LD2985G-50-AF5-R
UTC Unisonic Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
LD2985G-50-AF5-R from UTC Unisonic Tech, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input port of the regulator; the DC input voltage absolute maximum is 16 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | INHIBIT | input | Control input that switches the output on and off; it is not internally pulled up and cannot be left floating, the device is disabled when pulled to GND or to a voltage below 0.18 V, with VIL max 0.15 V and VIH min 2 V. |
| 4 | Bypass | passive | Bypass pin where a capacitor is connected to GND to improve thermal noise performance; a CBYP of 10 nF reduces output noise to 30 μVrms. |
| 5 | OUT | power_out | Regulated output port. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UTC Unisonic Tech |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN=6.0V | 12 |
| Output Voltage | VOUT | 4.85 | 5.15 | V | IOUT=1 ~ 150mA | 12 | |
| Short Circuit Current | ISC | 600 | mA | RL=0 | 12 | ||
| Line Regulation | △VOUT | 30 | mV | VIN=VOUT+1V ~ 16V, IOUT=1mA | 12 | ||
| Dropout Voltage | VD | 1 | 3 | mV | IOUT=0 | 12 | |
| Dropout Voltage | VD | 7 | 10 | mV | IOUT=1mA | 12 | |
| Dropout Voltage | VD | 40 | 60 | mV | IOUT=10mA | 12 | |
| Dropout Voltage | VD | 120 | 150 | mV | IOUT=50mA | 12 | |
| Dropout Voltage | VD | 280 | 350 | mV | IOUT=150mA | 12 | |
| Quiescent Current | IQ | 80 | 100 | μA | IOUT=0 | 12 | |
| Quiescent Current | IQ | 100 | 150 | μA | IOUT=1mA | 12 | |
| Quiescent Current | IQ | 280 | 330 | μA | IOUT=10mA | 12 | |
| Quiescent Current | IQ | 1050 | 1300 | μA | IOUT=50mA | 12 | |
| Quiescent Current | IQ | 2900 | 3300 | μA | IOUT=150mA | 12 | |
| Control Input Logic Low | VIL | 0.15 | V | 12 | |||
| Control Input Logic High | VIH | 2 | V | 12 | |||
| Control Input Current | IINH | 5 | 30 | μA | 12 | ||
| Control Input Current | IINH | -1 | 0 | μA | 12 | ||
| Operating Input Voltage | VI(OPR) | 16 | V | 12 | |||
| OFF MODE quiescent current | 1.5 | μA | VINH<0.18V | 12 | |||
| Output Noise Voltage | eN | 30 | μV | B=300Hz ~ 50KHz, CBYP=0.01μF, CO=10μF | 12 | ||
| Supply Voltage Rejection | SVR | 45 | dB | CBYP=0.01μF, CO=10μF, f=1KHz | 12 | ||
| DC Input Voltage | ViN | 16 | V | 4 | |||
| INHIBIT Input Voltage | VINH | 16 | V | 4 | |||
| Operating Junction Temperature | TOPR | -40 | 125 | °C | Note 2: determined from design only, not 100% tested | 4 | |
| Storage Temperature | TSTG | -40 | 150 | °C | 4 | ||
| Junction to Case thermal resistance | θJC | 81 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LD2985G-50-AF5-R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ld2985g-50-af5-r-etched.step/ld2985g-50-af5-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld2985g-50-af5-r.step/ld2985g-50-af5-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UTC Unisonic Tech datasheet (16 pp, sha256
c884d1a5cff07166, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).