main
Ray
ld1117v18: specified limits as data (metadata.characteristics, 21 rows from the datasheet)
9e5b91d
LD1117V18
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
LD1117V18 from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Ground reference pin for the fixed 1.8 V LD1117V18 (the ADJ pin on the adjustable version, where VREF = 1.25 V appears between OUT and ADJ). |
| 2 | VOUT | power_out | Regulated 1.8 V output (1.78 to 1.82 V at 25 °C) delivering up to 800 mA, needs a 10 µF minimum output capacitor for stability; the TO-220 tab is connected to VOUT. |
| 3 | VIN | power_in | Unregulated input supply, absolute maximum 15 V (18 V when IOUT is below 20 mA), with a typical 1 V dropout at the rated load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 1.78 | 1.8 | 1.82 | V | Vin = 3.8 V, IO = 10 mA, TJ = 25 °C | 10 |
| Output voltage | VO | 1.76 | 1.84 | V | IO = 0 to 800 mA, Vin = 3.3 to 8 V | 10 | |
| Line regulation | ∆VO | 1 | 6 | mV | Vin = 3.3 to 8 V, IO = 0 mA | 10 | |
| Load regulation | ∆VO | 1 | 10 | mV | Vin = 3.3 V, IO = 0 to 800 mA | 10 | |
| Operating input voltage | Vin | 15 | V | IO = 100 mA | 10 | ||
| Quiescent current | Id | 5 | 10 | mA | Vin ≤ 8 V | 10 | |
| Output current | IO | 800 | 950 | 1300 | mA | Vin = 6.8 V, TJ = 25 °C | 10 |
| Supply voltage rejection | SVR | 60 | 75 | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP | 10 | |
| Dropout voltage | Vd | 1 | 1.1 | V | IO = 100 mA | 10 | |
| Dropout voltage | Vd | 1.05 | 1.15 | V | IO = 500 mA | 10 | |
| Dropout voltage | Vd | 1.1 | 1.2 | V | IO = 800 mA | 10 | |
| Thermal regulation | 0.01 | 0.1 | %/W | TA = 25 °C, 30 ms pulse | 10 | ||
| DC input voltage | VIN | 15 | V | Note 1: 18 V absolute maximum when IOUT < 20 mA | 7 | ||
| Power dissipation | PTOT | 12 | W | 7 | |||
| Storage temperature range | TSTG | -40 | 150 | °C | 7 | ||
| Operating junction temperature range | TOP | 0 | 125 | °C | Standard version | 7 | |
| Temperature stability | ∆VO | 0.5 | % | 10 | |||
| Long term stability | ∆VO | 0.3 | % | 1000 hrs, TJ = 125 °C | 10 | ||
| Output noise voltage | eN | 100 | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 10 | ||
| Thermal resistance junction-case (TO-220) | RthJC | 5 | °C/W | 7 | |||
| Thermal resistance junction-ambient (TO-220) | RthJA | 50 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
LD1117V18 - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
ld1117v18-etched.step/ld1117v18-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld1117v18.step/ld1117v18.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
eb9bdaeee6a99a12, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LD1117V18
**STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
LD1117V18 from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | Ground reference pin for the fixed 1.8 V LD1117V18 (the ADJ pin on the adjustable version, where VREF = 1.25 V appears between OUT and ADJ). |
| 2 | VOUT | power_out | Regulated 1.8 V output (1.78 to 1.82 V at 25 °C) delivering up to 800 mA, needs a 10 µF minimum output capacitor for stability; the TO-220 tab is connected to VOUT. |
| 3 | VIN | power_in | Unregulated input supply, absolute maximum 15 V (18 V when IOUT is below 20 mA), with a typical 1 V dropout at the rated load. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 1.78 | 1.8 | 1.82 | V | Vin = 3.8 V, IO = 10 mA, TJ = 25 °C | 10 |
| Output voltage | VO | 1.76 | | 1.84 | V | IO = 0 to 800 mA, Vin = 3.3 to 8 V | 10 |
| Line regulation | ∆VO | | 1 | 6 | mV | Vin = 3.3 to 8 V, IO = 0 mA | 10 |
| Load regulation | ∆VO | | 1 | 10 | mV | Vin = 3.3 V, IO = 0 to 800 mA | 10 |
| Operating input voltage | Vin | | | 15 | V | IO = 100 mA | 10 |
| Quiescent current | Id | | 5 | 10 | mA | Vin ≤ 8 V | 10 |
| Output current | IO | 800 | 950 | 1300 | mA | Vin = 6.8 V, TJ = 25 °C | 10 |
| Supply voltage rejection | SVR | 60 | 75 | | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 5.5 V, Vripple = 1 VPP | 10 |
| Dropout voltage | Vd | | 1 | 1.1 | V | IO = 100 mA | 10 |
| Dropout voltage | Vd | | 1.05 | 1.15 | V | IO = 500 mA | 10 |
| Dropout voltage | Vd | | 1.1 | 1.2 | V | IO = 800 mA | 10 |
| Thermal regulation | | | 0.01 | 0.1 | %/W | TA = 25 °C, 30 ms pulse | 10 |
| DC input voltage | VIN | | | 15 | V | Note 1: 18 V absolute maximum when IOUT < 20 mA | 7 |
| Power dissipation | PTOT | | | 12 | W | | 7 |
| Storage temperature range | TSTG | -40 | | 150 | °C | | 7 |
| Operating junction temperature range | TOP | 0 | | 125 | °C | Standard version | 7 |
| Temperature stability | ∆VO | | 0.5 | | % | | 10 |
| Long term stability | ∆VO | | 0.3 | | % | 1000 hrs, TJ = 125 °C | 10 |
| Output noise voltage | eN | | 100 | | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 10 |
| Thermal resistance junction-case (TO-220) | RthJC | | 5 | | °C/W | | 7 |
| Thermal resistance junction-ambient (TO-220) | RthJA | | 50 | | °C/W | | 7 |
## CAD (KiCad official)
- Symbol: `LD1117V18`
- Footprint: `Package_TO_SOT_THT:TO-220-3_Vertical`
- 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files: `ld1117v18-etched.step` / `ld1117v18-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ld1117v18.step` / `ld1117v18.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590456278494982144) (46 pp, sha256 `eb9bdaeee6a99a12`, retrieved 2026-10-03, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ld1117v18-datasheet.pdf)