Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LD1117S50CTR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3
LD1117S50CTR from STMicroelectronics, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | input | ADJ/GND |
| 2 | VOUT | power_out | Regulated 5.0 V output, up to 800 mA. Requires a minimum 10 μF stability capacitor to ground. Electrically tied to the package TAB. KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Note: The TAB is connected to the VOUT). |
| 3 | VIN | power_in | Unregulated input supply. Must be at least VOUT + Vdropout (~1 V typ.) above the output, up to the absolute-maximum input voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-223-3 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (Vin = 7 V, IO = 10 mA, TJ = 25 °C) | VO | 4.9 | 5 | 5.1 | V | Vin = 7 V, IO = 10 mA, TJ = 25 °C | 19 |
| Output voltage (full load and line range) | VO | 4.8 | 5.2 | V | IO = 0 to 800 mA, Vin = 6.5 to 15 V | 19 | |
| Line regulation | ∆VO | 1 | 50 | mV | Vin = 6.5 to 15 V, IO = 0 mA | 19 | |
| Load regulation | ∆VO | 1 | 50 | mV | Vin = 6.5 V, IO = 0 to 800 mA | 19 | |
| Temperature stability | ∆VO | 0.5 | % | 19 | |||
| Long term stability | ∆VO | 0.3 | % | 1000 hrs, TJ = 125 °C | 19 | ||
| Operating input voltage | Vin | 15 | V | IO = 100 mA | 19 | ||
| Quiescent current | Id | 5 | 10 | mA | Vin ≤ 15 V | 19 | |
| Output current | IO | 800 | 950 | 1300 | mA | Vin = 10 V, TJ = 25 °C | 19 |
| Output noise voltage | eN | 100 | µV | B = 10 Hz to 10 kHz, TJ = 25 °C | 19 | ||
| Supply voltage rejection | SVR | 60 | 75 | dB | IO = 40 mA, f = 120 Hz, TJ = 25 °C, Vin = 8 V, Vripple = 1 VPP | 19 | |
| Dropout voltage (IO = 100 mA, TJ = 0 to 125 °C) | Vd | 1 | 1.1 | V | IO = 100 mA, TJ = 0 to 125 °C | 19 | |
| Dropout voltage (IO = 500 mA, TJ = 0 to 125 °C) | Vd | 1.05 | 1.15 | V | IO = 500 mA, TJ = 0 to 125 °C | 19 | |
| Dropout voltage (IO = 800 mA, TJ = 0 to 125 °C) | Vd | 1.1 | 1.2 | V | IO = 800 mA, TJ = 0 to 125 °C | 19 | |
| Dropout voltage (second set, 100 mA) | Vd | 1.1 | V | IO = 100 mA | 19 | ||
| Dropout voltage (second set, 500 mA) | Vd | 1.2 | V | IO = 500 mA | 19 | ||
| Dropout voltage (second set, 800 mA) | Vd | 1.3 | V | IO = 800 mA | 19 | ||
| Thermal regulation | 0.01 | 0.1 | %/W | Ta = 25 °C, 30 ms Pulse | 19 | ||
| DC input voltage | VIN | 15 | V | 7 | |||
| DC input voltage (footnote 1) | VIN | 18 | V | IOUT lower than 20 mA | 7 | ||
| Power dissipation | PTOT | 12 | W | 7 | |||
| Storage temperature range | TSTG | -40 | 150 | °C | 7 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | C version | 7 | |
| Thermal resistance junction-case | RthJC | 15 | °C/W | SOT-223 column | 7 | ||
| Thermal resistance junction-ambient | RthJA | 110 | °C/W | SOT-223 column | 7 |
CAD (KiCad official)
- Symbol:
LD1117S50CTR - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
ld1117s50ctr-etched.step/ld1117s50ctr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld1117s50ctr.step/ld1117s50ctr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
4fd8415a20d932fd, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).