← Commit history

Publish 0.2.1

Ray ·faa68462df · ·parent 9376c2a
4 files changed +324−8
ld1117as33tr-hero.glbadded
⋯ 1 unchanged line ⋯
ld1117as33tr-hero.overlay.jsonadded+172
@@ -0,0 +1,172 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "LD1117AS33TR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 4,+      "span_mm": 8.4,+      "dash_mm": 0.21,+      "gap_mm": 0.126,+      "pad_stroke_mm": 0.0504+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 5,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 4,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.664,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.5,+      3.5,+      -2.684,+      2.684+    ],+    "pads_bbox_mm": [+      -4.15,+      4.15,+      -3.05,+      3.05+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "ld1117as33tr-etched.glb",+    "glb_sha256": "42d8280e5257972c567669b6973ac16eb660397fe19ea8b152f7c3c7e7bd05b9",+    "footprint": "ld1117as33tr.kicad_mod",+    "footprint_sha256": "49f22605ecc1fc70661654e09eb86ebe3545a2a8a8c98dd6039bf2bc4b9f4839",+    "pins": "page.json component.pins",+    "pins_sha256": "1bdcb917ecfe63f335246e80426df84bc57d79a08e921ee44af962d0ddac3592"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "ADJ/GND",+      "x": -4.3,+      "y": -2.3,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "VOUT",+      "x": -4.3,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "VIN",+      "x": -4.3,+      "y": 2.3,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "TAB",+      "x": 4.3,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        -2.3+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        0.0+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -3.15,+        2.3+      ],+      "size_mm": [+        2.0,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        3.15,+        0.0+      ],+      "size_mm": [+        2.0,+        3.8+      ],+      "rot": 0.0+    }+  ]+}
package.json+140−3
@@ -1,6 +1,6 @@ {   "slug": "ld1117as33tr",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,14 +20,24 @@     "ld1117as33tr.kicad_mod",     "ld1117as33tr.glb",     "ld1117as33tr.step",+    "ld1117as33tr-etched.step",     "ld1117as33tr.lbr",     "docs/hero.png",     "docs/ld1117as33tr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pads.json"+    "pads.json",+    "ld1117as33tr-etched.glb",+    "ld1117as33tr-hero.glb",+    "ld1117as33tr-hero.overlay.json"   ],   "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "SOT-223-4",+      "Category": "PMIC",+      "Pins": "4"+    },     "characteristics": {       "version": 1,       "source": "datasheet",@@ -58,5 +68,132 @@         }       ]     }-  }+  },+  "component": {+    "mpn": "LD1117AS33TR",+    "manufacturer": "STMicroelectronics",+    "package": "SOT-223-4",+    "pin_count": 4,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.st.com/resource/en/datasheet/ld1117as33tr.pdf",+    "parts": {+      "symbol": "ld1117as33tr.kicad_sym",+      "footprint": "ld1117as33tr.kicad_mod",+      "model_3d": "ld1117as33tr-hero.glb",+      "model_3d_plain": "ld1117as33tr.glb",+      "model_3d_step": "ld1117as33tr-etched.step",+      "model_3d_step_plain": "ld1117as33tr.step",+      "lbr": "ld1117as33tr.lbr"+    },+    "distributor_links": {+      "digikey": "497-1228-2-ND",+      "mouser": "511-LD1117AS33",+      "lcsc": "C115288"+    },+    "pins": [+      {+        "number": "1",+        "name": "ADJ/GND",+        "type": "power_in",+        "description": "Ground reference pin for the fixed 3.3 V version (labeled ADJ/GND because the same die is used for the adjustable variant). Tie directly to system ground for the LD1117AS33TR. Quiescent current is typically 5 mA."+      },+      {+        "number": "2",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 3.3 V output (typ 3.3 V, 3.234-3.366 V at 25 °C, 10 mA). Sources up to 1 A (min 1000 mA, typ 1200 mA short-circuit). Requires a ≥10 µF output capacitor for loop stability. Internally connected to the exposed metal tab."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated DC input supply. Operating input voltage up to 10 V (absolute max 15 V). Minimum VIN for 3.3 V regulation is ~4.75 V (dropout typ 1.15 V at 1 A). A 100 nF input decoupling capacitor is recommended."+      },+      {+        "number": "4",+        "name": "TAB",+        "type": "power_out",+        "description": "Large SOT-223 heat-sink tab, internally shorted to VOUT. Provides the primary thermal path (RthJC = 15 °C/W); should be soldered to a copper area on the PCB that is also the VOUT net."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/ld1117as33tr.pdf",+        "pages": 24,+        "sha256": "c2dd41daa75f2827",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 4,+        "described": 4,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "pin1": {+      "pad": "1",+      "at": [+        -3.15,+        -2.3+      ],+      "corner": "top-left",+      "source": "silk-marker",+      "derived_from": "SOT-223@sha256:49f22605ecc1fc70",+      "mark": "drawn"+    },+    "models_3d": [+      {+        "file": "ld1117as33tr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7,+          6.5,+          1.7+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ld1117as33tr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7,+          6.5,+          1.7+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "53df80fb09018079d67742f2ed0f1aae804996ac46adc6b42e375244b811c2ee",+        "checked": "2026-10-16",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "LD1117AS33TR",+  "brief": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "discovery_triggers": [+    "ld1117as33tr"+  ],+  "discovery_pitch": "LD1117AS33TR (STMicroelectronics) component page with datasheet-verified CAD.",+  "visibility": "public" }
page.json+12−5
@@ -4,7 +4,7 @@   "slug": "ld1117as33tr",   "title": "LD1117AS33TR",   "brief": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.2.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -22,7 +22,7 @@     "parts": {       "symbol": "ld1117as33tr.kicad_sym",       "footprint": "ld1117as33tr.kicad_mod",-      "model_3d": "ld1117as33tr-etched.glb",+      "model_3d": "ld1117as33tr-hero.glb",       "model_3d_plain": "ld1117as33tr.glb",       "model_3d_step": "ld1117as33tr-etched.step",       "model_3d_step_plain": "ld1117as33tr.step",@@ -200,7 +200,11 @@     "docs/hero.png",     "docs/ld1117as33tr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "pads.json",+    "ld1117as33tr-etched.glb",+    "ld1117as33tr-hero.glb",+    "ld1117as33tr-hero.overlay.json"   ],   "variants": [     {@@ -240,5 +244,8 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-24T23:46:40.790Z"-}+  "updated_at": "2026-09-24T23:46:40.790Z",+  "description": "STMicroelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-4. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "visibility": "public",+  "org": "adom"+}\ No newline at end of file