3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLCMXO1200C-3TN100C
Lattice · CPLD/FPGA · TQFP-100(14x14)
LCMXO1200C-3TN100C from Lattice, in a TQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PL2A | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 2 | PL2B | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 3 | PL3C | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 4 | PL3D | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 5 | PL4B | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 6 | VCCIO7 | power_in | Power supply pin for I/O Bank 7. |
| 7 | PL6A | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 8 | PL6B/GSRN | bidirectional | Global RESET signal GSRN (active low) on a dedicated pad in Bank 7, complement side; when not used as GSRN it can be used as an I/O pin and is marked as supporting true LVDS outputs. |
| 9 | GND | power_in | Ground pin. |
| 10 | PL7C | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 11 | PL7D | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 12 | PL8C | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 13 | PL8D | bidirectional | Programmable sysIO user I/O on the left edge in Bank 7, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 14 | PL9C | bidirectional | Programmable sysIO user I/O on the left edge in Bank 6 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 15 | PL10A | bidirectional | Programmable sysIO user I/O on the left edge in Bank 6, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 16 | PL10B | bidirectional | Programmable sysIO user I/O on the left edge in Bank 6, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 17 | VCC | power_in | Power supply pin for core logic. |
| 18 | PL11B | bidirectional | Programmable sysIO user I/O on the left edge in Bank 6 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 19 | PL11C/TSALL | bidirectional | Dedicated TSALL pad for the global output enable; when TSALL is high all outputs are tristated, and when not in use the pin can be used as an I/O pin. |
| 20 | VCCIO6 | power_in | Power supply pin for I/O Bank 6. |
| 21 | PL13C | bidirectional | Programmable sysIO user I/O on the left edge in Bank 6 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 22 | PL14A/LLM0_PLLT_FB_A | bidirectional | Optional feedback input to the Lower PLL (LLM0), true side, which can also be used as a user I/O in Bank 6; marked by the datasheet as supporting true LVDS outputs. |
| 23 | PL14B/LLM0_PLLC_FB_A | bidirectional | Optional feedback input to the Lower PLL (LLM0), complement side, which can also be used as a user I/O in Bank 6; marked by the datasheet as supporting true LVDS outputs. |
| 24 | PL15A/LLM0_PLLT_IN_A | bidirectional | Reference clock input to the Lower PLL (LLM0), true side, which can also be used as a user I/O in Bank 6; marked by the datasheet as supporting true LVDS outputs. |
| 25 | PL15B/LLM0_PLLC_IN_A | bidirectional | Reference clock input to the Lower PLL (LLM0), complement side, which can also be used as a user I/O in Bank 6; marked by the datasheet as supporting true LVDS outputs. |
| 26 | GNDIO6/GNDIO5 | power_in | Ground pin double bonded to this package pin, connecting to both the Bank 6 and Bank 5 I/O grounds. |
| 27 | VCCIO5 | power_in | Power supply pin for I/O Bank 5. |
| 28 | TMS | input | Test Mode Select input pin used to control the 1149.1 state machine. |
| 29 | TCK | input | Test Clock input pin used to clock the 1149.1 state machine. |
| 30 | PB3B | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 5 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 31 | PB4A | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 5, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 32 | PB4B | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 5, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 33 | TDO | output | Test Data output pin used to shift data out of the device using 1149.1. |
| 34 | TDI | input | Test Data input pin used to load data into the device using the 1149.1 state machine. |
| 35 | VCC | power_in | Power supply pin for core logic. |
| 36 | VCCAUX | power_in | Auxiliary power supply pin that powers internal circuits including the differential and referenced input buffers. |
| 37 | PB6E | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 5, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 38 | PB6F | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 5, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 39 | PB7B/PCLK4_1 | bidirectional | Primary clock input PCLK4_1 in Bank 4, single-ended; when not used as a clock pin it can be used as a programmable sysIO user I/O. |
| 40 | PB7F/PCLK4_0 | bidirectional | Primary clock input PCLK4_0 in Bank 4, single-ended; when not used as a clock pin it can be used as a programmable sysIO user I/O. |
| 41 | GND | power_in | Ground pin. |
| 42 | PB9A | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 43 | PB9B | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 44 | VCCIO4 | power_in | Power supply pin for I/O Bank 4. |
| 45 | PB10A | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 46 | PB10B | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 47 | SLEEPN | input | Active-low Sleep mode pin; when held high the device operates normally, it has a weak internal pull-up, and an external pull-up to VCC is recommended when unused. |
| 48 | PB11A | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 49 | PB11B | bidirectional | Programmable sysIO user I/O on the bottom edge in Bank 4, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 50 | GNDIO3/GNDIO4 | power_in | Ground pin double bonded to this package pin, connecting to both the Bank 3 and Bank 4 I/O grounds. |
| 51 | PR16B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 52 | PR15B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 53 | PR15A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 54 | PR14B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 55 | PR14A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 56 | VCCIO3 | power_in | Power supply pin for I/O Bank 3. |
| 57 | PR12B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 58 | PR12A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 59 | GND | power_in | Ground pin. |
| 60 | PR10B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 61 | PR10A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 62 | PR9B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 63 | PR9A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 3, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 64 | PR8B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 65 | PR8A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 66 | VCC | power_in | Power supply pin for core logic. |
| 67 | PR6C | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 68 | PR6B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 69 | PR6A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 70 | VCCIO2 | power_in | Power supply pin for I/O Bank 2. |
| 71 | PR4D | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 72 | PR4B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, complement (C) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 73 | PR4A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, true (T) side of a differential pair; marked by the datasheet as supporting true LVDS outputs. |
| 74 | PR2B | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 75 | PR2A | bidirectional | Programmable sysIO user I/O on the right edge in Bank 2, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 76 | GNDIO1/GNDIO2 | power_in | Ground pin double bonded to this package pin, connecting to both the Bank 1 and Bank 2 I/O grounds. |
| 77 | PT11C | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 78 | PT11B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 79 | PT11A | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 80 | VCCIO1 | power_in | Power supply pin for I/O Bank 1. |
| 81 | PT9E | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 82 | PT9A | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 83 | GND | power_in | Ground pin. |
| 84 | PT8B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 85 | PT8A | bidirectional | Programmable sysIO user I/O on the top edge in Bank 1, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 86 | PT7D/PCLK1_1 | bidirectional | Primary clock input PCLK1_1 in Bank 1, single-ended; when not used as a clock pin it can be used as a programmable sysIO user I/O. |
| 87 | PT6F/PCLK0_0 | bidirectional | Primary clock input PCLK0_0 in Bank 0, single-ended as printed for this package; when not used as a clock pin it can be used as a programmable sysIO user I/O. |
| 88 | PT6D | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 89 | PT6C | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 90 | VCCAUX | power_in | Auxiliary power supply pin that powers internal circuits including the differential and referenced input buffers. |
| 91 | VCC | power_in | Power supply pin for core logic. |
| 92 | PT5B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 93 | PT4B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 94 | VCCIO0 | power_in | Power supply pin for I/O Bank 0. |
| 95 | PT3D | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 96 | PT3C | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 97 | PT3B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0 with no differential partner; during configuration it defaults to tri-state with internal pull-up enabled. |
| 98 | PT2B | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, complement (C) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 99 | PT2A | bidirectional | Programmable sysIO user I/O on the top edge in Bank 0, true (T) side of a differential pair; during configuration it defaults to tri-state with internal pull-up enabled. |
| 100 | GNDIO0/GNDIO7 | power_in | Ground pin double bonded to this package pin, connecting to both the Bank 0 and Bank 7 I/O grounds. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Core Supply Voltage for 1.8V/2.5V/3.3V Devices | VCC | 1.71 | 3.465 | V | 27 | ||
| Auxiliary Supply Voltage | VCCAUX | 3.135 | 3.465 | V | 27 | ||
| I/O Driver Supply Voltage | VCCIO | 1.14 | 3.465 | V | See recommended voltages by I/O standard | 27 | |
| Junction Temperature Commercial Operation | tJCOM | 0 | 85 | °C | Commercial operation | 27 | |
| Junction Temperature, Flash Programming, Commercial | tJFLASHCOM | 0 | 85 | °C | Flash programming, commercial | 27 | |
| VCCIO LVCMOS 3.3 | VCCIO | 3.135 | 3.3 | 3.465 | V | 31 | |
| VCCIO LVCMOS 2.5 | VCCIO | 2.375 | 2.5 | 2.625 | V | 31 | |
| VCCIO LVCMOS 1.8 | VCCIO | 1.71 | 1.8 | 1.89 | V | 31 | |
| VCCIO LVCMOS 1.5 | VCCIO | 1.425 | 1.5 | 1.575 | V | 31 | |
| VCCIO LVCMOS 1.2 | VCCIO | 1.14 | 1.2 | 1.26 | V | 31 | |
| VCCIO LVTTL | VCCIO | 3.135 | 3.3 | 3.465 | V | 31 | |
| VCCIO PCI | VCCIO | 3.135 | 3.3 | 3.465 | V | Input on top bank of MachXO1200 and MachXO2280 only | 31 |
| VCCIO LVDS | VCCIO | 2.375 | 2.5 | 2.625 | V | MachXO1200 and MachXO2280 have dedicated LVDS buffers | 31 |
| VCCIO LVPECL | VCCIO | 3.135 | 3.3 | 3.465 | V | 31 | |
| VCCIO BLVDS | VCCIO | 2.375 | 2.5 | 2.625 | V | 31 | |
| VCCIO RSDS | VCCIO | 2.375 | 2.5 | 2.625 | V | 31 | |
| Supply Voltage VCC (LCMXO C 1.8V/2.5V/3.3V) | VCC | -0.5 | 3.75 | V | 27 | ||
| Supply Voltage VCCAUX | VCCAUX | -0.5 | 3.75 | V | 27 | ||
| Output Supply Voltage VCCIO | VCCIO | -0.5 | 3.75 | V | 27 | ||
| I/O Tristate Voltage Applied | -0.5 | 3.75 | V | Overshoot/undershoot of -2V to (VIHMAX + 2) permitted for <20ns | 27 | ||
| Dedicated Input Voltage Applied | -0.5 | 4.25 | V | Overshoot/undershoot of -2V to (VIHMAX + 2) permitted for <20ns | 27 | ||
| Storage Temperature (ambient) | -65 | 150 | °C | 27 | |||
| Junction Temp. (Tj) | Tj | 125 | °C | 27 | |||
| Core Power Supply supply current, sleep mode (LCMXO1200C) | ICC | 12 | 25 | µA | Frequency = 0MHz; inputs LVCMOS held at VCCIO or GND; TA = 25°C | 29 | |
| Auxiliary Power Supply supply current, sleep mode (LCMXO1200C) | ICCAUX | 1 | 45 | µA | Frequency = 0MHz; inputs LVCMOS held at VCCIO or GND; TA = 25°C | 29 | |
| Bank Power Supply supply current, sleep mode (per bank) | ICCIO | 2 | 30 | µA | Per bank; Frequency = 0MHz; inputs LVCMOS held at VCCIO or GND | 29 | |
| Input or I/O Leakage Current, non-LVDS General Purpose sysIOs (hot socketing) | IDK | -1000 | 1000 | µA | 0 ≤ VIN ≤ VIH(MAX) | 28 | |
| Input or I/O Leakage Current, LVDS General Purpose sysIOs (hot socketing) | IDK_LVDS | -1000 | 1000 | µA | VIN ≤ VCCIO | 28 | |
| Input or I/O Leakage (low range) | IIL, IIH | 10 | µA | 0 ≤ VIN ≤ (VCCIO - 0.2V) | 28 | ||
| Input or I/O Leakage (high range) | IIL, IIH | 40 | µA | (VCCIO - 0.2V) < VIN ≤ 3.6V | 28 | ||
| I/O Active Pull-up Current | IPU | -30 | -150 | µA | 0 ≤ VIN ≤ 0.7 VCCIO | 28 | |
| I/O Active Pull-down Current | IPD | 30 | 150 | µA | VIL(MAX) ≤ VIN ≤ VIH(MAX) | 28 | |
| Bus Hold Low sustaining current | IBHLS | 30 | µA | VIN = VIL(MAX) | 28 | ||
| Bus Hold High sustaining current | IBHHS | -30 | µA | VIN = 0.7VCCIO | 28 | ||
| Bus Hold Low Overdrive current | IBHLO | 150 | µA | 0 ≤ VIN ≤ VIH(MAX) | 28 | ||
| Bus Hold High Overdrive current | IBHHO | -150 | µA | 0 ≤ VIN ≤ VIH(MAX) | 28 | ||
| Input low voltage LVTTL | VIL | -0.3 | 0.8 | V | 31 | ||
| Input high voltage LVTTL | VIH | 2 | 3.6 | V | 31 | ||
| Input low voltage LVCMOS 3.3 | VIL | -0.3 | 0.8 | V | 31 | ||
| Input high voltage LVCMOS 3.3 | VIH | 2 | 3.6 | V | 31 | ||
| Input low voltage LVCMOS 2.5 | VIL | -0.3 | 0.7 | V | 31 | ||
| Input high voltage LVCMOS 2.5 | VIH | 1.7 | 3.6 | V | 31 | ||
| Input low voltage LVCMOS 1.8 | VIL | -0.3 | V | Max printed as 0.35VCCIO | 31 | ||
| Input high voltage LVCMOS 1.8 | VIH | 3.6 | V | Min printed as 0.65VCCIO | 31 | ||
| Input low voltage LVCMOS 1.5 | VIL | -0.3 | V | Max printed as 0.35VCCIO | 31 | ||
| Input high voltage LVCMOS 1.5 | VIH | 3.6 | V | Min printed as 0.65VCCIO | 31 | ||
| Input low voltage LVCMOS 1.2 (C version) | VIL | -0.3 | 0.42 | V | 31 | ||
| Input high voltage LVCMOS 1.2 (C version) | VIH | 0.78 | 3.6 | V | 31 | ||
| Input low voltage PCI | VIL | -0.3 | V | Max printed as 0.3VCCIO | 31 | ||
| Input high voltage PCI | VIH | 3.6 | V | Min printed as 0.5VCCIO | 31 | ||
| Output low voltage LVTTL | VOL | 0.4 | V | IOL 16 mA | 31 | ||
| Output high voltage LVTTL | VOH | 2.4 | V | IOH -16 mA | 31 | ||
| Output low voltage LVCMOS 3.3 | VOL | 0.4 | V | IOL 16, 12, 8, 4 mA | 31 | ||
| Output low voltage LVCMOS 2.5 | VOL | 0.4 | V | IOL 16, 12, 8, 4 mA | 31 | ||
| Output low voltage LVCMOS 1.8 | VOL | 0.4 | V | IOL 16, 12, 8, 4 mA | 31 | ||
| Output low voltage LVCMOS 1.5 | VOL | 0.4 | V | IOL 8, 4 mA | 31 | ||
| Output low voltage LVCMOS 1.2 (C version) | VOL | 0.4 | V | IOL 6, 2 mA | 31 | ||
| Input Clock Frequency (CLKI, CLKFB) | fIN | 25 | 420 | MHz | 40 | ||
| PLL VCO Frequency | fVCO | 420 | 840 | MHz | 40 |
CAD (KiCad official)
- Symbol:
LCMXO1200C-3TN100C - Footprint:
Package_QFP:TQFP-100_14x14mm_P0.5mm - 3D model: TQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
lcmxo1200c-3tn100c-etched.step/lcmxo1200c-3tn100c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lcmxo1200c-3tn100c.step/lcmxo1200c-3tn100c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (94 pp, sha256
ef1824c1615000b3, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).