main
Ray Publish 0.1.1 2d0deea
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490
{
  "slug": "lc4128ze-7tn100i",
  "version": "0.1.1",
  "type": "component",
  "description": "Lattice Programmable Logic Device (CPLDs/FPGAs), TQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "lc4128ze-7tn100i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lc4128ze-7tn100i.kicad_sym",
    "lc4128ze-7tn100i.kicad_mod",
    "lc4128ze-7tn100i.glb",
    "lc4128ze-7tn100i.step",
    "lc4128ze-7tn100i.lbr",
    "docs/hero.png",
    "docs/lc4128ze-7tn100i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lc4128ze-7tn100i-hero.glb",
    "lc4128ze-7tn100i-hero.overlay.json",
    "lc4128ze-7tn100i-etched.glb",
    "lc4128ze-7tn100i-etched.step"
  ],
  "component": {
    "mpn": "LC4128ZE-7TN100I",
    "manufacturer": "Lattice",
    "package": "TQFP-100(14x14)",
    "pin_count": 100,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Programmable Logic Device (CPLDs/FPGAs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f2669c13ef0c4c8590d121f71303f89e.pdf",
    "parts": {
      "symbol": "lc4128ze-7tn100i.kicad_sym",
      "footprint": "lc4128ze-7tn100i.kicad_mod",
      "model_3d": "lc4128ze-7tn100i-hero.glb",
      "model_3d_plain": "lc4128ze-7tn100i.glb",
      "model_3d_step": "lc4128ze-7tn100i-etched.step",
      "model_3d_step_plain": "lc4128ze-7tn100i.step",
      "lbr": "lc4128ze-7tn100i.lbr"
    },
    "distributor_links": {
      "lcsc": "C1521230",
      "digikey": "220-1026-ND",
      "mouser": "842-LC4128ZE-7TN100I"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:56:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "220-1026-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "842-LC4128ZE-7TN100I",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; all grounds must be electrically connected at the board level."
      },
      {
        "number": "2",
        "name": "TDI",
        "type": "input",
        "description": "IEEE 1149.1 Test Data In pin, used to load data into the JTAG/ISP test access port."
      },
      {
        "number": "3",
        "name": "B0",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 0) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "4",
        "name": "B2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "5",
        "name": "B4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "6",
        "name": "B6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "7",
        "name": "GND (Bank 0)",
        "type": "power_in",
        "description": "Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "8",
        "name": "B8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "9",
        "name": "B10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "10",
        "name": "B12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "11",
        "name": "B13",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB B, macrocell 13) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "12",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "13",
        "name": "VCCO (Bank 0)",
        "type": "power_in",
        "description": "Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "14",
        "name": "C14",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 14) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "15",
        "name": "C12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "16",
        "name": "C10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "17",
        "name": "C8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "18",
        "name": "GND (Bank 0)",
        "type": "power_in",
        "description": "Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "19",
        "name": "C6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "20",
        "name": "C5",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 5) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "21",
        "name": "C4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "22",
        "name": "C2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB C, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "23",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "24",
        "name": "TCK",
        "type": "input",
        "description": "IEEE 1149.1 Test Clock input used to clock the TAP state machine."
      },
      {
        "number": "25",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V)."
      },
      {
        "number": "26",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; all grounds must be electrically connected at the board level."
      },
      {
        "number": "27",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "28",
        "name": "D13",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 13) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "29",
        "name": "D12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "30",
        "name": "D10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "31",
        "name": "D8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "32",
        "name": "GND (Bank 0)",
        "type": "power_in",
        "description": "Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "33",
        "name": "VCCO (Bank 0)",
        "type": "power_in",
        "description": "Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "34",
        "name": "D6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "35",
        "name": "D4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "36",
        "name": "D2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "37",
        "name": "D0",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB D, macrocell 0) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "38",
        "name": "CLK1/I",
        "type": "input",
        "description": "Global clock input CLK1 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB."
      },
      {
        "number": "39",
        "name": "CLK2/I",
        "type": "input",
        "description": "Global clock input CLK2 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB."
      },
      {
        "number": "40",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V)."
      },
      {
        "number": "41",
        "name": "E0",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 0) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "42",
        "name": "E2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "43",
        "name": "E4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "44",
        "name": "E6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "45",
        "name": "VCCO (Bank 1)",
        "type": "power_in",
        "description": "Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "46",
        "name": "GND (Bank 1)",
        "type": "power_in",
        "description": "Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "47",
        "name": "E8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "48",
        "name": "E10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "49",
        "name": "E12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "50",
        "name": "E14",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB E, macrocell 14) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "51",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; all grounds must be electrically connected at the board level."
      },
      {
        "number": "52",
        "name": "TMS",
        "type": "input",
        "description": "IEEE 1149.1 Test Mode Select input, used to control the TAP state machine."
      },
      {
        "number": "53",
        "name": "F0",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 0) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "54",
        "name": "F2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "55",
        "name": "F4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "56",
        "name": "F6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "57",
        "name": "GND (Bank 1)",
        "type": "power_in",
        "description": "Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "58",
        "name": "F8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "59",
        "name": "F10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "60",
        "name": "F12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "61",
        "name": "F13",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB F, macrocell 13) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "62",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "63",
        "name": "VCCO (Bank 1)",
        "type": "power_in",
        "description": "Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "64",
        "name": "G14",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 14) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "65",
        "name": "G12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "66",
        "name": "G10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "67",
        "name": "G8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "68",
        "name": "GND (Bank 1)",
        "type": "power_in",
        "description": "Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "69",
        "name": "G6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "70",
        "name": "G5",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 5) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "71",
        "name": "G4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "72",
        "name": "G2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB G, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "73",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "74",
        "name": "TDO",
        "type": "output",
        "description": "IEEE 1149.1 Test Data Out pin, used to shift data out of the test access port."
      },
      {
        "number": "75",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V)."
      },
      {
        "number": "76",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference; all grounds must be electrically connected at the board level."
      },
      {
        "number": "77",
        "name": "I",
        "type": "input",
        "description": "Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard."
      },
      {
        "number": "78",
        "name": "H13",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 13) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "79",
        "name": "H12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "80",
        "name": "H10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "81",
        "name": "H8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "82",
        "name": "GND (Bank 1)",
        "type": "power_in",
        "description": "Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "83",
        "name": "VCCO (Bank 1)",
        "type": "power_in",
        "description": "Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "84",
        "name": "H6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "85",
        "name": "H4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "86",
        "name": "H2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "87",
        "name": "H0/GOE1",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB H, macrocell 0) in Bank 1 that can also be configured as Global OE input GOE1; outputs follow the Bank 1 VCCO standard."
      },
      {
        "number": "88",
        "name": "CLK3/I",
        "type": "input",
        "description": "Global clock input CLK3 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB."
      },
      {
        "number": "89",
        "name": "CLK0/I",
        "type": "input",
        "description": "Global clock input CLK0 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB."
      },
      {
        "number": "90",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V)."
      },
      {
        "number": "91",
        "name": "A0/GOE0",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 0) in Bank 0 that can also be configured as Global OE input GOE0; outputs follow the Bank 0 VCCO standard."
      },
      {
        "number": "92",
        "name": "A2",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "93",
        "name": "A4",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "94",
        "name": "A6",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "95",
        "name": "VCCO (Bank 0)",
        "type": "power_in",
        "description": "Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8)."
      },
      {
        "number": "96",
        "name": "GND (Bank 0)",
        "type": "power_in",
        "description": "Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections."
      },
      {
        "number": "97",
        "name": "A8",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "98",
        "name": "A10",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "99",
        "name": "A12",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      },
      {
        "number": "100",
        "name": "A14",
        "type": "bidirectional",
        "description": "General-purpose I/O (GLB A, macrocell 14) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mapping: LC4128ZE-7TN100I is a 100-pin Lead-Free TQFP (14 x 14 mm), 64 I/O, industrial grade; I/O pin names are the datasheet's GLB/macrocell/pad designations (e.g., B0 = GLB B, macrocell 0), no; Pin types are assigned by function: CLK/I and dedicated I pins as input, GOE/IO pins as bidirectiona"
        ],
        "pages_sent": 60,
        "cost_usd": 0.3467,
        "at": "2026-10-29T01:55:48"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f2669c13ef0c4c8590d121f71303f89e.pdf",
        "pages": 60,
        "sha256": "eb9c71b2e5422c79",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 100,
        "described": 100,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lc4128ze-7tn100i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "99d530be126138ea024746562f1110203db0273456e99932e7e1930dc9f5fba5",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lc4128ze-7tn100i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0f3735a1eb3503933f90869a10afcb36939ea0cc82da901287ced2e23c239d22",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LC4128ZE-7TN100I",
  "brief": "Lattice Programmable Logic Device (CPLDs/FPGAs), TQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Lattice",
      "Package": "TQFP-100(14x14)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "100"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "eb9c71b2e5422c79b97d41f72aab372d2edf674fc2f708d635983c8cb678b33d",
      "rows": [
        {
          "name": "tPD 20-PT combinatorial propagation delay (-7)",
          "symbol": "tPD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 7.5,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tS GLB register setup time before clock (-7)",
          "symbol": "tS",
          "kind": "timing",
          "unit": "ns",
          "min": 4.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tST GLB register setup time before clock with T-type register (-7)",
          "symbol": "tST",
          "kind": "timing",
          "unit": "ns",
          "min": 4.7,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tSIR GLB register setup time before clock, input register path (-7)",
          "symbol": "tSIR",
          "kind": "timing",
          "unit": "ns",
          "min": 1.4,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tSIRZ GLB register setup time before clock with zero hold (-7)",
          "symbol": "tSIRZ",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tH GLB register hold time after clock (-7)",
          "symbol": "tH",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tHT GLB register hold time after clock with T-type register (-7)",
          "symbol": "tHT",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tHIR GLB register hold time after clock, input register path (-7)",
          "symbol": "tHIR",
          "kind": "timing",
          "unit": "ns",
          "min": 1.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tHIRZ GLB register hold time after clock, input register path with zero hold (-7)",
          "symbol": "tHIRZ",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tCO GLB register clock-to-output delay (-7)",
          "symbol": "tCO",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 4.5,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tR External reset pin to output delay (-7)",
          "symbol": "tR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tRW External reset pulse duration (-7)",
          "symbol": "tRW",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tPTOE/DIS Input to output local product term output enable/disable (-7)",
          "symbol": "tPTOE/DIS",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tGPTOE/DIS Input to output global product term output enable/disable (-7)",
          "symbol": "tGPTOE/DIS",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 10.5,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tGOE/DIS Global OE input to output enable/disable (-7)",
          "symbol": "tGOE/DIS",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tCW Global clock width, high or low (-7)",
          "symbol": "tCW",
          "kind": "timing",
          "unit": "ns",
          "min": 2.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tGW Global gate width low (for low transparent) or high (for high transparent) (-7)",
          "symbol": "tGW",
          "kind": "timing",
          "unit": "ns",
          "min": 2.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "tWIR Input register clock width, high or low (-7)",
          "symbol": "tWIR",
          "kind": "timing",
          "unit": "ns",
          "min": 2.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "fMAX (Int.) clock frequency with internal feedback (-7)",
          "symbol": "fMAX (Int.)",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 172,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "fMAX (Ext.) clock frequency with external feedback, [1 / (tS + tCO)] (-7)",
          "symbol": "fMAX (Ext.)",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 111,
          "conditions": "",
          "source_page": 22,
          "source": "datasheet"
        },
        {
          "name": "Junction Temperature (Industrial)",
          "symbol": "Tj",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 105,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Voltage, Standard Voltage Operation",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 1.9,
          "conditions": "Standard voltage operation",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Voltage, Extended Voltage Operation",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.61,
          "typ": null,
          "max": 1.9,
          "conditions": "Extended voltage operation",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, LVTTL",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, LVCMOS 3.3",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, Extended LVCMOS 3.3",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.7,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, LVCMOS 2.5",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.3,
          "typ": null,
          "max": 2.7,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, LVCMOS 1.8",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.65,
          "typ": null,
          "max": 1.95,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, LVCMOS 1.5",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.4,
          "typ": null,
          "max": 1.6,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O VCCO recommended, PCI 3.3",
          "symbol": "VCCO",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "VCC Supply Voltage (absolute maximum)",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 2.5,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Output Supply Voltage (absolute maximum)",
          "symbol": "VCCO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 4.5,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Input or I/O Tristate Voltage Applied",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Junction Temperature (Tj) with Power Applied",
          "symbol": "Tj",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Input or I/O Leakage Current (IDK)",
          "symbol": "IDK",
          "kind": "electrical",
          "unit": "µA",
          "min": -150,
          "typ": 30,
          "max": 150,
          "conditions": "0 ≤ VIN ≤ 3.0V, Tj = 105°C",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Input Leakage Current",
          "symbol": "IIL, IIH",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.5,
          "max": 1,
          "conditions": "0 ≤ VIN < VCCO",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "Input High Leakage Current",
          "symbol": "IIH1",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "VCCO < VIN ≤ 5.5V",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O Weak Pull-up Resistor Current",
          "symbol": "IPU",
          "kind": "electrical",
          "unit": "µA",
          "min": -20,
          "typ": null,
          "max": -150,
          "conditions": "0 ≤ VIN ≤ 0.7VCCO",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "I/O Weak Pull-down Resistor Current",
          "symbol": "IPD",
          "kind": "electrical",
          "unit": "µA",
          "min": 30,
          "typ": null,
          "max": 150,
          "conditions": "VIL (MAX) ≤ VIN ≤ VIH (MAX)",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "Bus Hold Low Sustaining Current",
          "symbol": "IBHLS",
          "kind": "electrical",
          "unit": "µA",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "VIN = VIL (MAX)",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "Standby Power Supply Current (4128ZE, Industrial)",
          "symbol": "ICC4, 5, 6",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 19,
          "max": 60,
          "conditions": "Vcc = 1.9V, TA = -40 to 85°C",
          "source_page": 20,
          "source": "datasheet"
        },
        {
          "name": "Operating Power Supply Current (4128ZE, Industrial)",
          "symbol": "ICC1, 2, 3, 5, 6",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 195,
          "max": null,
          "conditions": "Vcc = 1.9V, TA = -40 to 85°C",
          "source_page": 20,
          "source": "datasheet"
        },
        {
          "name": "VIL, LVTTL input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, LVTTL input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIL, LVCMOS 3.3 input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, LVCMOS 3.3 input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIL, LVCMOS 2.5 input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 0.7,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, LVCMOS 2.5 input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIL, LVCMOS 1.8 input low voltage (max is 0.35*VCC, not numeric)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, LVCMOS 1.8 input high voltage (min is 0.65*VCC, not numeric)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIL, LVCMOS 1.5 input low voltage (max is 0.35*VCC, not numeric)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, LVCMOS 1.5 input high voltage (min is 0.65*VCC, not numeric)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIL, PCI 3.3 input low voltage (max is VCC-dependent, not numeric)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VIH, PCI 3.3 input high voltage (min is VCC-dependent, not numeric)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VOL, LVTTL output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 8.0 mA",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VOL, LVCMOS 3.3 output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 8.0 mA",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VOL, LVCMOS 2.5 output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 8.0 mA",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VOL, LVCMOS 1.8 output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 2.0 mA",
          "source_page": 21,
          "source": "datasheet"
        },
        {
          "name": "VOL, LVCMOS 1.5 output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 2.0 mA",
          "source_page": 21,
          "source": "datasheet"
        }
      ]
    }
  },
  "discovery_triggers": [
    "lc4128ze-7tn100i"
  ],
  "discovery_pitch": "LC4128ZE-7TN100I (Lattice) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}