main
Ray Publish 0.1.0 d4c60eb

LC4128ZE-7TN100I

Lattice · Programmable Logic Device (CPLDs/FPGAs) · TQFP-100(14x14)

LC4128ZE-7TN100I from Lattice, in a TQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference; all grounds must be electrically connected at the board level.
2 TDI input IEEE 1149.1 Test Data In pin, used to load data into the JTAG/ISP test access port.
3 B0 bidirectional General-purpose I/O (GLB B, macrocell 0) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
4 B2 bidirectional General-purpose I/O (GLB B, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
5 B4 bidirectional General-purpose I/O (GLB B, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
6 B6 bidirectional General-purpose I/O (GLB B, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
7 GND (Bank 0) power_in Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
8 B8 bidirectional General-purpose I/O (GLB B, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
9 B10 bidirectional General-purpose I/O (GLB B, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
10 B12 bidirectional General-purpose I/O (GLB B, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
11 B13 bidirectional General-purpose I/O (GLB B, macrocell 13) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
12 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
13 VCCO (Bank 0) power_in Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
14 C14 bidirectional General-purpose I/O (GLB C, macrocell 14) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
15 C12 bidirectional General-purpose I/O (GLB C, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
16 C10 bidirectional General-purpose I/O (GLB C, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
17 C8 bidirectional General-purpose I/O (GLB C, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
18 GND (Bank 0) power_in Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
19 C6 bidirectional General-purpose I/O (GLB C, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
20 C5 bidirectional General-purpose I/O (GLB C, macrocell 5) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
21 C4 bidirectional General-purpose I/O (GLB C, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
22 C2 bidirectional General-purpose I/O (GLB C, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
23 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
24 TCK input IEEE 1149.1 Test Clock input used to clock the TAP state machine.
25 VCC power_in Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V).
26 GND power_in Device ground reference; all grounds must be electrically connected at the board level.
27 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
28 D13 bidirectional General-purpose I/O (GLB D, macrocell 13) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
29 D12 bidirectional General-purpose I/O (GLB D, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
30 D10 bidirectional General-purpose I/O (GLB D, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
31 D8 bidirectional General-purpose I/O (GLB D, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
32 GND (Bank 0) power_in Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
33 VCCO (Bank 0) power_in Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
34 D6 bidirectional General-purpose I/O (GLB D, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
35 D4 bidirectional General-purpose I/O (GLB D, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
36 D2 bidirectional General-purpose I/O (GLB D, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
37 D0 bidirectional General-purpose I/O (GLB D, macrocell 0) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
38 CLK1/I input Global clock input CLK1 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB.
39 CLK2/I input Global clock input CLK2 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB.
40 VCC power_in Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V).
41 E0 bidirectional General-purpose I/O (GLB E, macrocell 0) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
42 E2 bidirectional General-purpose I/O (GLB E, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
43 E4 bidirectional General-purpose I/O (GLB E, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
44 E6 bidirectional General-purpose I/O (GLB E, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
45 VCCO (Bank 1) power_in Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
46 GND (Bank 1) power_in Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
47 E8 bidirectional General-purpose I/O (GLB E, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
48 E10 bidirectional General-purpose I/O (GLB E, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
49 E12 bidirectional General-purpose I/O (GLB E, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
50 E14 bidirectional General-purpose I/O (GLB E, macrocell 14) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
51 GND power_in Device ground reference; all grounds must be electrically connected at the board level.
52 TMS input IEEE 1149.1 Test Mode Select input, used to control the TAP state machine.
53 F0 bidirectional General-purpose I/O (GLB F, macrocell 0) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
54 F2 bidirectional General-purpose I/O (GLB F, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
55 F4 bidirectional General-purpose I/O (GLB F, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
56 F6 bidirectional General-purpose I/O (GLB F, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
57 GND (Bank 1) power_in Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
58 F8 bidirectional General-purpose I/O (GLB F, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
59 F10 bidirectional General-purpose I/O (GLB F, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
60 F12 bidirectional General-purpose I/O (GLB F, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
61 F13 bidirectional General-purpose I/O (GLB F, macrocell 13) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
62 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
63 VCCO (Bank 1) power_in Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
64 G14 bidirectional General-purpose I/O (GLB G, macrocell 14) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
65 G12 bidirectional General-purpose I/O (GLB G, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
66 G10 bidirectional General-purpose I/O (GLB G, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
67 G8 bidirectional General-purpose I/O (GLB G, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
68 GND (Bank 1) power_in Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
69 G6 bidirectional General-purpose I/O (GLB G, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
70 G5 bidirectional General-purpose I/O (GLB G, macrocell 5) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
71 G4 bidirectional General-purpose I/O (GLB G, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
72 G2 bidirectional General-purpose I/O (GLB G, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
73 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
74 TDO output IEEE 1149.1 Test Data Out pin, used to shift data out of the test access port.
75 VCC power_in Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V).
76 GND power_in Device ground reference; all grounds must be electrically connected at the board level.
77 I input Input-only dedicated input pin with no output driver, marked input only for this package; it can optionally use Power Guard.
78 H13 bidirectional General-purpose I/O (GLB H, macrocell 13) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
79 H12 bidirectional General-purpose I/O (GLB H, macrocell 12) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
80 H10 bidirectional General-purpose I/O (GLB H, macrocell 10) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
81 H8 bidirectional General-purpose I/O (GLB H, macrocell 8) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
82 GND (Bank 1) power_in Ground for I/O Bank 1; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
83 VCCO (Bank 1) power_in Supply for I/O Bank 1; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
84 H6 bidirectional General-purpose I/O (GLB H, macrocell 6) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
85 H4 bidirectional General-purpose I/O (GLB H, macrocell 4) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
86 H2 bidirectional General-purpose I/O (GLB H, macrocell 2) in Bank 1; outputs follow the Bank 1 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
87 H0/GOE1 bidirectional General-purpose I/O (GLB H, macrocell 0) in Bank 1 that can also be configured as Global OE input GOE1; outputs follow the Bank 1 VCCO standard.
88 CLK3/I input Global clock input CLK3 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB.
89 CLK0/I input Global clock input CLK0 (also usable as a general input) that is routed to the GRP and to the clock generator of each GLB.
90 VCC power_in Supply for the 1.8V logic core and JTAG port; standard operating range 1.7 to 1.9V (extended 1.61 to 1.9V).
91 A0/GOE0 bidirectional General-purpose I/O (GLB A, macrocell 0) in Bank 0 that can also be configured as Global OE input GOE0; outputs follow the Bank 0 VCCO standard.
92 A2 bidirectional General-purpose I/O (GLB A, macrocell 2) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
93 A4 bidirectional General-purpose I/O (GLB A, macrocell 4) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
94 A6 bidirectional General-purpose I/O (GLB A, macrocell 6) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
95 VCCO (Bank 0) power_in Supply for I/O Bank 0; VCCO sets the output standard for the bank and must be within the range for that standard (e.g., 3.0 to 3.6V for LVTTL and LVCMOS 3.3, 1.65 to 1.95V for LVCMOS 1.8).
96 GND (Bank 0) power_in Ground for I/O Bank 0; bank grounds are associated with the bank for I/O current loading, which must not exceed n x 8mA between bank GND connections.
97 A8 bidirectional General-purpose I/O (GLB A, macrocell 8) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
98 A10 bidirectional General-purpose I/O (GLB A, macrocell 10) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
99 A12 bidirectional General-purpose I/O (GLB A, macrocell 12) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.
100 A14 bidirectional General-purpose I/O (GLB A, macrocell 14) in Bank 0; outputs follow the Bank 0 VCCO standard and inputs are programmable per pin for pull-up, pull-down or bus-keeper.

Key specifications

Parameter Value
Manufacturer Lattice
Package TQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
tPD 20-PT combinatorial propagation delay (-7) tPD 7.5 ns 22
tS GLB register setup time before clock (-7) tS 4.5 ns 22
tST GLB register setup time before clock with T-type register (-7) tST 4.7 ns 22
tSIR GLB register setup time before clock, input register path (-7) tSIR 1.4 ns 22
tSIRZ GLB register setup time before clock with zero hold (-7) tSIRZ 4 ns 22
tH GLB register hold time after clock (-7) tH 0 ns 22
tHT GLB register hold time after clock with T-type register (-7) tHT 0 ns 22
tHIR GLB register hold time after clock, input register path (-7) tHIR 1.3 ns 22
tHIRZ GLB register hold time after clock, input register path with zero hold (-7) tHIRZ 0 ns 22
tCO GLB register clock-to-output delay (-7) tCO 4.5 ns 22
tR External reset pin to output delay (-7) tR 9 ns 22
tRW External reset pulse duration (-7) tRW 4 ns 22
tPTOE/DIS Input to output local product term output enable/disable (-7) tPTOE/DIS 9 ns 22
tGPTOE/DIS Input to output global product term output enable/disable (-7) tGPTOE/DIS 10.5 ns 22
tGOE/DIS Global OE input to output enable/disable (-7) tGOE/DIS 7 ns 22
tCW Global clock width, high or low (-7) tCW 2.8 ns 22
tGW Global gate width low (for low transparent) or high (for high transparent) (-7) tGW 2.8 ns 22
tWIR Input register clock width, high or low (-7) tWIR 2.8 ns 22
fMAX (Int.) clock frequency with internal feedback (-7) fMAX (Int.) 172 MHz 22
fMAX (Ext.) clock frequency with external feedback, [1 / (tS + tCO)] (-7) fMAX (Ext.) 111 MHz 22
Junction Temperature (Industrial) Tj -40 105 °C 18
VCC Supply Voltage, Standard Voltage Operation VCC 1.7 1.9 V Standard voltage operation 18
VCC Supply Voltage, Extended Voltage Operation VCC 1.61 1.9 V Extended voltage operation 18
I/O VCCO recommended, LVTTL VCCO 3 3.6 V 19
I/O VCCO recommended, LVCMOS 3.3 VCCO 3 3.6 V 19
I/O VCCO recommended, Extended LVCMOS 3.3 VCCO 2.7 3.6 V 19
I/O VCCO recommended, LVCMOS 2.5 VCCO 2.3 2.7 V 19
I/O VCCO recommended, LVCMOS 1.8 VCCO 1.65 1.95 V 19
I/O VCCO recommended, LVCMOS 1.5 VCCO 1.4 1.6 V 19
I/O VCCO recommended, PCI 3.3 VCCO 3 3.6 V 19
VCC Supply Voltage (absolute maximum) VCC -0.5 2.5 V 18
Output Supply Voltage (absolute maximum) VCCO -0.5 4.5 V 18
Input or I/O Tristate Voltage Applied -0.5 5.5 V 18
Storage Temperature -65 150 °C 18
Junction Temperature (Tj) with Power Applied Tj -55 150 °C 18
Input or I/O Leakage Current (IDK) IDK -150 30 150 µA 0 ≤ VIN ≤ 3.0V, Tj = 105°C 18
Input Leakage Current IIL, IIH 0.5 1 µA 0 ≤ VIN < VCCO 19
Input High Leakage Current IIH1 10 µA VCCO < VIN ≤ 5.5V 19
I/O Weak Pull-up Resistor Current IPU -20 -150 µA 0 ≤ VIN ≤ 0.7VCCO 19
I/O Weak Pull-down Resistor Current IPD 30 150 µA VIL (MAX) ≤ VIN ≤ VIH (MAX) 19
Bus Hold Low Sustaining Current IBHLS 30 µA VIN = VIL (MAX) 19
Standby Power Supply Current (4128ZE, Industrial) ICC4, 5, 6 19 60 µA Vcc = 1.9V, TA = -40 to 85°C 20
Operating Power Supply Current (4128ZE, Industrial) ICC1, 2, 3, 5, 6 195 µA Vcc = 1.9V, TA = -40 to 85°C 20
VIL, LVTTL input low voltage VIL -0.3 0.8 V 21
VIH, LVTTL input high voltage VIH 2 5.5 V 21
VIL, LVCMOS 3.3 input low voltage VIL -0.3 0.8 V 21
VIH, LVCMOS 3.3 input high voltage VIH 2 5.5 V 21
VIL, LVCMOS 2.5 input low voltage VIL -0.3 0.7 V 21
VIH, LVCMOS 2.5 input high voltage VIH 1.7 3.6 V 21
VIL, LVCMOS 1.8 input low voltage (max is 0.35*VCC, not numeric) VIL -0.3 V 21
VIH, LVCMOS 1.8 input high voltage (min is 0.65*VCC, not numeric) VIH 3.6 V 21
VIL, LVCMOS 1.5 input low voltage (max is 0.35*VCC, not numeric) VIL -0.3 V 21
VIH, LVCMOS 1.5 input high voltage (min is 0.65*VCC, not numeric) VIH 3.6 V 21
VIL, PCI 3.3 input low voltage (max is VCC-dependent, not numeric) VIL -0.3 V 21
VIH, PCI 3.3 input high voltage (min is VCC-dependent, not numeric) VIH 5.5 V 21
VOL, LVTTL output low voltage VOL 0.4 V IOL = 8.0 mA 21
VOL, LVCMOS 3.3 output low voltage VOL 0.4 V IOL = 8.0 mA 21
VOL, LVCMOS 2.5 output low voltage VOL 0.4 V IOL = 8.0 mA 21
VOL, LVCMOS 1.8 output low voltage VOL 0.4 V IOL = 2.0 mA 21
VOL, LVCMOS 1.5 output low voltage VOL 0.4 V IOL = 2.0 mA 21

CAD (KiCad official)

  • Symbol: LC4128ZE-7TN100I
  • Footprint: Package_QFP:TQFP-100_14x14mm_P0.5mm
  • 3D model: TQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: lc4128ze-7tn100i-etched.step / lc4128ze-7tn100i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lc4128ze-7tn100i.step / lc4128ze-7tn100i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Lattice datasheet (60 pp, sha256 eb9c71b2e5422c79, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF