3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLC4064ZE-7TN100C
Lattice · Programmable Logic Device (CPLDs/FPGAs) · TQFP-100(14x14)
LC4064ZE-7TN100C from Lattice, in a TQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection; all grounds must be electrically connected at the board level. |
| 2 | TDI | input | IEEE 1149.1 test data input used to load data into the JTAG and ISP port. |
| 3 | A8 | bidirectional | General purpose I/O of GLB A macrocell 8 in I/O Bank 0, with output levels set by the bank VCCO. |
| 4 | A9 | bidirectional | General purpose I/O of GLB A macrocell 9 in I/O Bank 0, with output levels set by the bank VCCO. |
| 5 | A10 | bidirectional | General purpose I/O of GLB A macrocell 10 in I/O Bank 0, with output levels set by the bank VCCO. |
| 6 | A11 | bidirectional | General purpose I/O of GLB A macrocell 11 in I/O Bank 0, with output levels set by the bank VCCO. |
| 7 | GND (Bank 0) | power_in | Ground connection associated with I/O Bank 0 for I/O current loading. |
| 8 | A12 | bidirectional | General purpose I/O of GLB A macrocell 12 in I/O Bank 0, with output levels set by the bank VCCO. |
| 9 | A13 | bidirectional | General purpose I/O of GLB A macrocell 13 in I/O Bank 0, with output levels set by the bank VCCO. |
| 10 | A14 | bidirectional | General purpose I/O of GLB A macrocell 14 in I/O Bank 0, with output levels set by the bank VCCO. |
| 11 | A15 | bidirectional | General purpose I/O of GLB A macrocell 15 in I/O Bank 0, with output levels set by the bank VCCO. |
| 12 | I | input | Input-only pin that can be used as a dedicated input. |
| 13 | VCCO (Bank 0) | power_in | I/O supply for Bank 0, which sets the output standard of the bank. |
| 14 | B15 | bidirectional | General purpose I/O of GLB B macrocell 15 in I/O Bank 0, with output levels set by the bank VCCO. |
| 15 | B14 | bidirectional | General purpose I/O of GLB B macrocell 14 in I/O Bank 0, with output levels set by the bank VCCO. |
| 16 | B13 | bidirectional | General purpose I/O of GLB B macrocell 13 in I/O Bank 0, with output levels set by the bank VCCO. |
| 17 | B12 | bidirectional | General purpose I/O of GLB B macrocell 12 in I/O Bank 0, with output levels set by the bank VCCO. |
| 18 | GND (Bank 0) | power_in | Ground connection associated with I/O Bank 0 for I/O current loading. |
| 19 | B11 | bidirectional | General purpose I/O of GLB B macrocell 11 in I/O Bank 0, with output levels set by the bank VCCO. |
| 20 | B10 | bidirectional | General purpose I/O of GLB B macrocell 10 in I/O Bank 0, with output levels set by the bank VCCO. |
| 21 | B9 | bidirectional | General purpose I/O of GLB B macrocell 9 in I/O Bank 0, with output levels set by the bank VCCO. |
| 22 | B8 | bidirectional | General purpose I/O of GLB B macrocell 8 in I/O Bank 0, with output levels set by the bank VCCO. |
| 23 | I | input | Input-only pin that can be used as a dedicated input. |
| 24 | TCK | input | IEEE 1149.1 test clock input used to clock the JTAG state machine. |
| 25 | VCC | power_in | 1.8V core and JTAG port supply. |
| 26 | GND | power_in | Ground connection; all grounds must be electrically connected at the board level. |
| 27 | I | input | Input-only pin that can be used as a dedicated input. |
| 28 | B7 | bidirectional | General purpose I/O of GLB B macrocell 7 in I/O Bank 0, with output levels set by the bank VCCO. |
| 29 | B6 | bidirectional | General purpose I/O of GLB B macrocell 6 in I/O Bank 0, with output levels set by the bank VCCO. |
| 30 | B5 | bidirectional | General purpose I/O of GLB B macrocell 5 in I/O Bank 0, with output levels set by the bank VCCO. |
| 31 | B4 | bidirectional | General purpose I/O of GLB B macrocell 4 in I/O Bank 0, with output levels set by the bank VCCO. |
| 32 | GND (Bank 0) | power_in | Ground connection associated with I/O Bank 0 for I/O current loading. |
| 33 | VCCO (Bank 0) | power_in | I/O supply for Bank 0, which sets the output standard of the bank. |
| 34 | B3 | bidirectional | General purpose I/O of GLB B macrocell 3 in I/O Bank 0, with output levels set by the bank VCCO. |
| 35 | B2 | bidirectional | General purpose I/O of GLB B macrocell 2 in I/O Bank 0, with output levels set by the bank VCCO. |
| 36 | B1 | bidirectional | General purpose I/O of GLB B macrocell 1 in I/O Bank 0, with output levels set by the bank VCCO. |
| 37 | B0 | bidirectional | General purpose I/O of GLB B macrocell 0 in I/O Bank 0, with output levels set by the bank VCCO. |
| 38 | CLK1/I | input | Global clock input pin that also drives the GLB clock generators and can be used as an input. |
| 39 | CLK2/I | input | Global clock input pin that also drives the GLB clock generators and can be used as an input. |
| 40 | VCC | power_in | 1.8V core and JTAG port supply. |
| 41 | C0 | bidirectional | General purpose I/O of GLB C macrocell 0 in I/O Bank 1, with output levels set by the bank VCCO. |
| 42 | C1 | bidirectional | General purpose I/O of GLB C macrocell 1 in I/O Bank 1, with output levels set by the bank VCCO. |
| 43 | C2 | bidirectional | General purpose I/O of GLB C macrocell 2 in I/O Bank 1, with output levels set by the bank VCCO. |
| 44 | C3 | bidirectional | General purpose I/O of GLB C macrocell 3 in I/O Bank 1, with output levels set by the bank VCCO. |
| 45 | VCCO (Bank 1) | power_in | I/O supply for Bank 1, which sets the output standard of the bank. |
| 46 | GND (Bank 1) | power_in | Ground connection associated with I/O Bank 1 for I/O current loading. |
| 47 | C4 | bidirectional | General purpose I/O of GLB C macrocell 4 in I/O Bank 1, with output levels set by the bank VCCO. |
| 48 | C5 | bidirectional | General purpose I/O of GLB C macrocell 5 in I/O Bank 1, with output levels set by the bank VCCO. |
| 49 | C6 | bidirectional | General purpose I/O of GLB C macrocell 6 in I/O Bank 1, with output levels set by the bank VCCO. |
| 50 | C7 | bidirectional | General purpose I/O of GLB C macrocell 7 in I/O Bank 1, with output levels set by the bank VCCO. |
| 51 | GND | power_in | Ground connection; all grounds must be electrically connected at the board level. |
| 52 | TMS | input | IEEE 1149.1 test mode select input used to control the JTAG state machine. |
| 53 | C8 | bidirectional | General purpose I/O of GLB C macrocell 8 in I/O Bank 1, with output levels set by the bank VCCO. |
| 54 | C9 | bidirectional | General purpose I/O of GLB C macrocell 9 in I/O Bank 1, with output levels set by the bank VCCO. |
| 55 | C10 | bidirectional | General purpose I/O of GLB C macrocell 10 in I/O Bank 1, with output levels set by the bank VCCO. |
| 56 | C11 | bidirectional | General purpose I/O of GLB C macrocell 11 in I/O Bank 1, with output levels set by the bank VCCO. |
| 57 | GND (Bank 1) | power_in | Ground connection associated with I/O Bank 1 for I/O current loading. |
| 58 | C12 | bidirectional | General purpose I/O of GLB C macrocell 12 in I/O Bank 1, with output levels set by the bank VCCO. |
| 59 | C13 | bidirectional | General purpose I/O of GLB C macrocell 13 in I/O Bank 1, with output levels set by the bank VCCO. |
| 60 | C14 | bidirectional | General purpose I/O of GLB C macrocell 14 in I/O Bank 1, with output levels set by the bank VCCO. |
| 61 | C15 | bidirectional | General purpose I/O of GLB C macrocell 15 in I/O Bank 1, with output levels set by the bank VCCO. |
| 62 | I | input | Input-only pin that can be used as a dedicated input. |
| 63 | VCCO (Bank 1) | power_in | I/O supply for Bank 1, which sets the output standard of the bank. |
| 64 | D15 | bidirectional | General purpose I/O of GLB D macrocell 15 in I/O Bank 1, with output levels set by the bank VCCO. |
| 65 | D14 | bidirectional | General purpose I/O of GLB D macrocell 14 in I/O Bank 1, with output levels set by the bank VCCO. |
| 66 | D13 | bidirectional | General purpose I/O of GLB D macrocell 13 in I/O Bank 1, with output levels set by the bank VCCO. |
| 67 | D12 | bidirectional | General purpose I/O of GLB D macrocell 12 in I/O Bank 1, with output levels set by the bank VCCO. |
| 68 | GND (Bank 1) | power_in | Ground connection associated with I/O Bank 1 for I/O current loading. |
| 69 | D11 | bidirectional | General purpose I/O of GLB D macrocell 11 in I/O Bank 1, with output levels set by the bank VCCO. |
| 70 | D10 | bidirectional | General purpose I/O of GLB D macrocell 10 in I/O Bank 1, with output levels set by the bank VCCO. |
| 71 | D9 | bidirectional | General purpose I/O of GLB D macrocell 9 in I/O Bank 1, with output levels set by the bank VCCO. |
| 72 | D8 | bidirectional | General purpose I/O of GLB D macrocell 8 in I/O Bank 1, with output levels set by the bank VCCO. |
| 73 | I | input | Input-only pin that can be used as a dedicated input. |
| 74 | TDO | output | IEEE 1149.1 test data output used to shift data out of the JTAG port. |
| 75 | VCC | power_in | 1.8V core and JTAG port supply. |
| 76 | GND | power_in | Ground connection; all grounds must be electrically connected at the board level. |
| 77 | I | input | Input-only pin that can be used as a dedicated input. |
| 78 | D7 | bidirectional | General purpose I/O of GLB D macrocell 7 in I/O Bank 1, with output levels set by the bank VCCO. |
| 79 | D6 | bidirectional | General purpose I/O of GLB D macrocell 6 in I/O Bank 1, with output levels set by the bank VCCO. |
| 80 | D5 | bidirectional | General purpose I/O of GLB D macrocell 5 in I/O Bank 1, with output levels set by the bank VCCO. |
| 81 | D4 | bidirectional | General purpose I/O of GLB D macrocell 4 in I/O Bank 1, with output levels set by the bank VCCO. |
| 82 | GND (Bank 1) | power_in | Ground connection associated with I/O Bank 1 for I/O current loading. |
| 83 | VCCO (Bank 1) | power_in | I/O supply for Bank 1, which sets the output standard of the bank. |
| 84 | D3 | bidirectional | General purpose I/O of GLB D macrocell 3 in I/O Bank 1, with output levels set by the bank VCCO. |
| 85 | D2 | bidirectional | General purpose I/O of GLB D macrocell 2 in I/O Bank 1, with output levels set by the bank VCCO. |
| 86 | D1 | bidirectional | General purpose I/O of GLB D macrocell 1 in I/O Bank 1, with output levels set by the bank VCCO. |
| 87 | D0/GOE1 | bidirectional | Dual purpose I/O of GLB D macrocell 0 in I/O Bank 1 that can also serve as Global OE input 1. |
| 88 | CLK3/I | input | Global clock input pin that also drives the GLB clock generators and can be used as an input. |
| 89 | CLK0/I | input | Global clock input pin that also drives the GLB clock generators and can be used as an input. |
| 90 | VCC | power_in | 1.8V core and JTAG port supply. |
| 91 | A0/GOE0 | bidirectional | Dual purpose I/O of GLB A macrocell 0 in I/O Bank 0 that can also serve as Global OE input 0. |
| 92 | A1 | bidirectional | General purpose I/O of GLB A macrocell 1 in I/O Bank 0, with output levels set by the bank VCCO. |
| 93 | A2 | bidirectional | General purpose I/O of GLB A macrocell 2 in I/O Bank 0, with output levels set by the bank VCCO. |
| 94 | A3 | bidirectional | General purpose I/O of GLB A macrocell 3 in I/O Bank 0, with output levels set by the bank VCCO. |
| 95 | VCCO (Bank 0) | power_in | I/O supply for Bank 0, which sets the output standard of the bank. |
| 96 | GND (Bank 0) | power_in | Ground connection associated with I/O Bank 0 for I/O current loading. |
| 97 | A4 | bidirectional | General purpose I/O of GLB A macrocell 4 in I/O Bank 0, with output levels set by the bank VCCO. |
| 98 | A5 | bidirectional | General purpose I/O of GLB A macrocell 5 in I/O Bank 0, with output levels set by the bank VCCO. |
| 99 | A6 | bidirectional | General purpose I/O of GLB A macrocell 6 in I/O Bank 0, with output levels set by the bank VCCO. |
| 100 | A7 | bidirectional | General purpose I/O of GLB A macrocell 7 in I/O Bank 0, with output levels set by the bank VCCO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
LC4064ZE-7TN100C - Footprint:
Package_QFP:TQFP-100_14x14mm_P0.5mm - 3D model: TQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
lc4064ze-7tn100c-etched.step/lc4064ze-7tn100c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lc4064ze-7tn100c.step/lc4064ze-7tn100c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (60 pp, sha256
eb9c71b2e5422c79, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).