main
Ray
Publish 0.1.0
0eb2879
LC4064ZC-75TN48C
Lattice · CPLD/FPGA · TQFP-48(7x7)
LC4064ZC-75TN48C from Lattice, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TDI | input | IEEE 1149.1 test data input used to load boundary-scan and in-system programming data. |
| 2 | A8 | bidirectional | General-purpose I/O (GLB A, macrocell 8) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 3 | A10 | bidirectional | General-purpose I/O (GLB A, macrocell 10) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 4 | A11 | bidirectional | General-purpose I/O (GLB A, macrocell 11) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 5 | GND (Bank 0) | power_in | Ground pin associated with I/O bank 0; all grounds must be electrically connected at the board level. |
| 6 | VCCO (Bank 0) | power_in | I/O supply for bank 0, whose level sets the output standard (1.65 V to 3.6 V across LVCMOS 1.8 to 3.3 and LVTTL). |
| 7 | B15 | bidirectional | General-purpose I/O (GLB B, macrocell 15) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 8 | B12 | bidirectional | General-purpose I/O (GLB B, macrocell 12) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 9 | B10 | bidirectional | General-purpose I/O (GLB B, macrocell 10) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 10 | B8 | bidirectional | General-purpose I/O (GLB B, macrocell 8) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 11 | TCK | input | IEEE 1149.1 test clock input that clocks the boundary-scan TAP state machine. |
| 12 | VCC | power_in | Core supply for the 1.8 V ispMACH 4000Z logic and JTAG port, specified at 1.7 V to 1.9 V. |
| 13 | GND | power_in | Ground pin; all grounds must be electrically connected at the board level. |
| 14 | B6 | bidirectional | General-purpose I/O (GLB B, macrocell 6) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 15 | B4 | bidirectional | General-purpose I/O (GLB B, macrocell 4) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 16 | B2 | bidirectional | General-purpose I/O (GLB B, macrocell 2) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 17 | B0 | bidirectional | General-purpose I/O (GLB B, macrocell 0) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 18 | CLK1/I | input | Global clock input (CLK1) that can also be used as a general logic input, with programmable clock polarity. |
| 19 | CLK2/I | input | Global clock input (CLK2) that can also be used as a general logic input, with programmable clock polarity. |
| 20 | C0 | bidirectional | General-purpose I/O (GLB C, macrocell 0) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 21 | C1 | bidirectional | General-purpose I/O (GLB C, macrocell 1) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 22 | C2 | bidirectional | General-purpose I/O (GLB C, macrocell 2) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 23 | C4 | bidirectional | General-purpose I/O (GLB C, macrocell 4) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 24 | C6 | bidirectional | General-purpose I/O (GLB C, macrocell 6) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 25 | TMS | input | IEEE 1149.1 test mode select input that controls the boundary-scan TAP state machine. |
| 26 | C8 | bidirectional | General-purpose I/O (GLB C, macrocell 8) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 27 | C10 | bidirectional | General-purpose I/O (GLB C, macrocell 10) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 28 | C11 | bidirectional | General-purpose I/O (GLB C, macrocell 11) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 29 | GND (Bank 1) | power_in | Ground pin associated with I/O bank 1; all grounds must be electrically connected at the board level. |
| 30 | VCCO (Bank 1) | power_in | I/O supply for bank 1, whose level sets the output standard (1.65 V to 3.6 V across LVCMOS 1.8 to 3.3 and LVTTL). |
| 31 | D15 | bidirectional | General-purpose I/O (GLB D, macrocell 15) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 32 | D12 | bidirectional | General-purpose I/O (GLB D, macrocell 12) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 33 | D10 | bidirectional | General-purpose I/O (GLB D, macrocell 10) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 34 | D8 | bidirectional | General-purpose I/O (GLB D, macrocell 8) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 35 | TDO | output | IEEE 1149.1 test data output that shifts boundary-scan and programming data out of the device. |
| 36 | VCC | power_in | Core supply for the 1.8 V ispMACH 4000Z logic and JTAG port, specified at 1.7 V to 1.9 V. |
| 37 | GND | power_in | Ground pin; all grounds must be electrically connected at the board level. |
| 38 | D6 | bidirectional | General-purpose I/O (GLB D, macrocell 6) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 39 | D4 | bidirectional | General-purpose I/O (GLB D, macrocell 4) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 40 | D2 | bidirectional | General-purpose I/O (GLB D, macrocell 2) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 41 | D0/GOE1 | bidirectional | General-purpose I/O (GLB D, macrocell 0) in bank 1 that can also serve as Global Output Enable input GOE1. |
| 42 | CLK3/I | input | Global clock input (CLK3) that can also be used as a general logic input, with programmable clock polarity. |
| 43 | CLK0/I | input | Global clock input (CLK0) that can also be used as a general logic input, with programmable clock polarity. |
| 44 | A0/GOE0 | bidirectional | General-purpose I/O (GLB A, macrocell 0) in bank 0 that can also serve as Global Output Enable input GOE0. |
| 45 | A1 | bidirectional | General-purpose I/O (GLB A, macrocell 1) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 46 | A2 | bidirectional | General-purpose I/O (GLB A, macrocell 2) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 47 | A4 | bidirectional | General-purpose I/O (GLB A, macrocell 4) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 48 | A6 | bidirectional | General-purpose I/O (GLB A, macrocell 6) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
LC4064ZC-75TN48C - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
lc4064zc-75tn48c-etched.step/lc4064zc-75tn48c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lc4064zc-75tn48c.step/lc4064zc-75tn48c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (99 pp, sha256
33dfab1d07669e66, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LC4064ZC-75TN48C
**Lattice** · CPLD/FPGA · TQFP-48(7x7)
LC4064ZC-75TN48C from Lattice, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TDI | input | IEEE 1149.1 test data input used to load boundary-scan and in-system programming data. |
| 2 | A8 | bidirectional | General-purpose I/O (GLB A, macrocell 8) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 3 | A10 | bidirectional | General-purpose I/O (GLB A, macrocell 10) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 4 | A11 | bidirectional | General-purpose I/O (GLB A, macrocell 11) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 5 | GND (Bank 0) | power_in | Ground pin associated with I/O bank 0; all grounds must be electrically connected at the board level. |
| 6 | VCCO (Bank 0) | power_in | I/O supply for bank 0, whose level sets the output standard (1.65 V to 3.6 V across LVCMOS 1.8 to 3.3 and LVTTL). |
| 7 | B15 | bidirectional | General-purpose I/O (GLB B, macrocell 15) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 8 | B12 | bidirectional | General-purpose I/O (GLB B, macrocell 12) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 9 | B10 | bidirectional | General-purpose I/O (GLB B, macrocell 10) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 10 | B8 | bidirectional | General-purpose I/O (GLB B, macrocell 8) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 11 | TCK | input | IEEE 1149.1 test clock input that clocks the boundary-scan TAP state machine. |
| 12 | VCC | power_in | Core supply for the 1.8 V ispMACH 4000Z logic and JTAG port, specified at 1.7 V to 1.9 V. |
| 13 | GND | power_in | Ground pin; all grounds must be electrically connected at the board level. |
| 14 | B6 | bidirectional | General-purpose I/O (GLB B, macrocell 6) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 15 | B4 | bidirectional | General-purpose I/O (GLB B, macrocell 4) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 16 | B2 | bidirectional | General-purpose I/O (GLB B, macrocell 2) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 17 | B0 | bidirectional | General-purpose I/O (GLB B, macrocell 0) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 18 | CLK1/I | input | Global clock input (CLK1) that can also be used as a general logic input, with programmable clock polarity. |
| 19 | CLK2/I | input | Global clock input (CLK2) that can also be used as a general logic input, with programmable clock polarity. |
| 20 | C0 | bidirectional | General-purpose I/O (GLB C, macrocell 0) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 21 | C1 | bidirectional | General-purpose I/O (GLB C, macrocell 1) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 22 | C2 | bidirectional | General-purpose I/O (GLB C, macrocell 2) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 23 | C4 | bidirectional | General-purpose I/O (GLB C, macrocell 4) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 24 | C6 | bidirectional | General-purpose I/O (GLB C, macrocell 6) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 25 | TMS | input | IEEE 1149.1 test mode select input that controls the boundary-scan TAP state machine. |
| 26 | C8 | bidirectional | General-purpose I/O (GLB C, macrocell 8) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 27 | C10 | bidirectional | General-purpose I/O (GLB C, macrocell 10) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 28 | C11 | bidirectional | General-purpose I/O (GLB C, macrocell 11) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 29 | GND (Bank 1) | power_in | Ground pin associated with I/O bank 1; all grounds must be electrically connected at the board level. |
| 30 | VCCO (Bank 1) | power_in | I/O supply for bank 1, whose level sets the output standard (1.65 V to 3.6 V across LVCMOS 1.8 to 3.3 and LVTTL). |
| 31 | D15 | bidirectional | General-purpose I/O (GLB D, macrocell 15) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 32 | D12 | bidirectional | General-purpose I/O (GLB D, macrocell 12) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 33 | D10 | bidirectional | General-purpose I/O (GLB D, macrocell 10) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 34 | D8 | bidirectional | General-purpose I/O (GLB D, macrocell 8) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 35 | TDO | output | IEEE 1149.1 test data output that shifts boundary-scan and programming data out of the device. |
| 36 | VCC | power_in | Core supply for the 1.8 V ispMACH 4000Z logic and JTAG port, specified at 1.7 V to 1.9 V. |
| 37 | GND | power_in | Ground pin; all grounds must be electrically connected at the board level. |
| 38 | D6 | bidirectional | General-purpose I/O (GLB D, macrocell 6) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 39 | D4 | bidirectional | General-purpose I/O (GLB D, macrocell 4) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 40 | D2 | bidirectional | General-purpose I/O (GLB D, macrocell 2) in bank 1, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 41 | D0/GOE1 | bidirectional | General-purpose I/O (GLB D, macrocell 0) in bank 1 that can also serve as Global Output Enable input GOE1. |
| 42 | CLK3/I | input | Global clock input (CLK3) that can also be used as a general logic input, with programmable clock polarity. |
| 43 | CLK0/I | input | Global clock input (CLK0) that can also be used as a general logic input, with programmable clock polarity. |
| 44 | A0/GOE0 | bidirectional | General-purpose I/O (GLB A, macrocell 0) in bank 0 that can also serve as Global Output Enable input GOE0. |
| 45 | A1 | bidirectional | General-purpose I/O (GLB A, macrocell 1) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 46 | A2 | bidirectional | General-purpose I/O (GLB A, macrocell 2) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 47 | A4 | bidirectional | General-purpose I/O (GLB A, macrocell 4) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
| 48 | A6 | bidirectional | General-purpose I/O (GLB A, macrocell 6) in bank 0, with programmable output slew rate and selectable pull-up, pull-down or bus-keeper input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## CAD (KiCad official)
- Symbol: `LC4064ZC-75TN48C`
- Footprint: `Package_QFP:TQFP-48_7x7mm_P0.5mm`
- 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `lc4064zc-75tn48c-etched.step` / `lc4064zc-75tn48c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lc4064zc-75tn48c.step` / `lc4064zc-75tn48c.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Lattice datasheet](docs/lc4064zc-75tn48c-datasheet.pdf) (99 pp, sha256 `33dfab1d07669e66`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lc4064zc-75tn48c-datasheet.pdf)