3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLC4032ZC-75TN48C
Lattice · CPLD/FPGA · TQFP-48(7x7)
LC4032ZC-75TN48C from Lattice, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TDI | input | IEEE 1149.1 Test Data In pin used to load data into the JTAG/boundary-scan chain. |
| 2 | A5 | bidirectional | General-purpose I/O A5 in I/O bank 0 (GLB A, macrocell 5, ORP A^5); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 3 | A6 | bidirectional | General-purpose I/O A6 in I/O bank 0 (GLB A, macrocell 6, ORP A^6); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 4 | A7 | bidirectional | General-purpose I/O A7 in I/O bank 0 (GLB A, macrocell 7, ORP A^7); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 5 | GND (Bank 0) | power_in | Ground pin associated with I/O bank 0 for I/O current loading; all grounds must be electrically connected at the board level. |
| 6 | VCCO (Bank 0) | power_in | Output supply for I/O bank 0 that sets the output standard; 5V tolerant inputs require VCCO between 3.0V and 3.6V. |
| 7 | A8 | bidirectional | General-purpose I/O A8 in I/O bank 0 (GLB A, macrocell 8, ORP A^8); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 8 | A9 | bidirectional | General-purpose I/O A9 in I/O bank 0 (GLB A, macrocell 9, ORP A^9); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 9 | A10 | bidirectional | General-purpose I/O A10 in I/O bank 0 (GLB A, macrocell 10, ORP A^10); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 10 | A11 | bidirectional | General-purpose I/O A11 in I/O bank 0 (GLB A, macrocell 11, ORP A^11); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 11 | TCK | input | IEEE 1149.1 Test Clock input used to clock the JTAG state machine. |
| 12 | VCC | power_in | Power supply for the logic core and JTAG port; ispMACH 4000Z requires 1.7V to 1.9V. |
| 13 | GND | power_in | Ground pin for the device core and I/O; all grounds must be electrically connected at the board level. |
| 14 | A12 | bidirectional | General-purpose I/O A12 in I/O bank 0 (GLB A, macrocell 12, ORP A^12); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 15 | A13 | bidirectional | General-purpose I/O A13 in I/O bank 0 (GLB A, macrocell 13, ORP A^13); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 16 | A14 | bidirectional | General-purpose I/O A14 in I/O bank 0 (GLB A, macrocell 14, ORP A^14); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 17 | A15 | bidirectional | General-purpose I/O A15 in I/O bank 0 (GLB A, macrocell 15, ORP A^15); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 18 | CLK1/I | input | Dedicated global clock input CLK1 (also routed to the GRP) that can be used as an input. |
| 19 | CLK2/I | input | Dedicated global clock input CLK2 (also routed to the GRP) that can be used as an input. |
| 20 | B0 | bidirectional | General-purpose I/O B0 in I/O bank 1 (GLB B, macrocell 0, ORP B^0); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 21 | B1 | bidirectional | General-purpose I/O B1 in I/O bank 1 (GLB B, macrocell 1, ORP B^1); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 22 | B2 | bidirectional | General-purpose I/O B2 in I/O bank 1 (GLB B, macrocell 2, ORP B^2); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 23 | B3 | bidirectional | General-purpose I/O B3 in I/O bank 1 (GLB B, macrocell 3, ORP B^3); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 24 | B4 | bidirectional | General-purpose I/O B4 in I/O bank 1 (GLB B, macrocell 4, ORP B^4); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 25 | TMS | input | IEEE 1149.1 Test Mode Select input used to control the JTAG state machine. |
| 26 | B5 | bidirectional | General-purpose I/O B5 in I/O bank 1 (GLB B, macrocell 5, ORP B^5); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 27 | B6 | bidirectional | General-purpose I/O B6 in I/O bank 1 (GLB B, macrocell 6, ORP B^6); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 28 | B7 | bidirectional | General-purpose I/O B7 in I/O bank 1 (GLB B, macrocell 7, ORP B^7); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 29 | GND (Bank 1) | power_in | Ground pin associated with I/O bank 1 for I/O current loading; all grounds must be electrically connected at the board level. |
| 30 | VCCO (Bank 1) | power_in | Output supply for I/O bank 1 that sets the output standard; 5V tolerant inputs require VCCO between 3.0V and 3.6V. |
| 31 | B8 | bidirectional | General-purpose I/O B8 in I/O bank 1 (GLB B, macrocell 8, ORP B^8); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 32 | B9 | bidirectional | General-purpose I/O B9 in I/O bank 1 (GLB B, macrocell 9, ORP B^9); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 33 | B10 | bidirectional | General-purpose I/O B10 in I/O bank 1 (GLB B, macrocell 10, ORP B^10); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 34 | B11 | bidirectional | General-purpose I/O B11 in I/O bank 1 (GLB B, macrocell 11, ORP B^11); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 35 | TDO | output | IEEE 1149.1 Test Data Out pin used to shift data out of the JTAG chain. |
| 36 | VCC | power_in | Power supply for the logic core and JTAG port; ispMACH 4000Z requires 1.7V to 1.9V. |
| 37 | GND | power_in | Ground pin for the device core and I/O; all grounds must be electrically connected at the board level. |
| 38 | B12 | bidirectional | General-purpose I/O B12 in I/O bank 1 (GLB B, macrocell 12, ORP B^12); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 39 | B13 | bidirectional | General-purpose I/O B13 in I/O bank 1 (GLB B, macrocell 13, ORP B^13); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 40 | B14 | bidirectional | General-purpose I/O B14 in I/O bank 1 (GLB B, macrocell 14, ORP B^14); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 41 | B15/GOE1 | bidirectional | General-purpose I/O B15 in I/O bank 1 that can also be configured as Global Output Enable input GOE1 (ORP B^15). |
| 42 | CLK3/I | input | Dedicated global clock input CLK3 (also routed to the GRP) that can be used as an input. |
| 43 | CLK0/I | input | Dedicated global clock input CLK0 (also routed to the GRP) that can be used as an input. |
| 44 | A0/GOE0 | bidirectional | General-purpose I/O A0 in I/O bank 0 that can also be configured as Global Output Enable input GOE0 (ORP A^0). |
| 45 | A1 | bidirectional | General-purpose I/O A1 in I/O bank 0 (GLB A, macrocell 1, ORP A^1); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 46 | A2 | bidirectional | General-purpose I/O A2 in I/O bank 0 (GLB A, macrocell 2, ORP A^2); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 47 | A3 | bidirectional | General-purpose I/O A3 in I/O bank 0 (GLB A, macrocell 3, ORP A^3); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
| 48 | A4 | bidirectional | General-purpose I/O A4 in I/O bank 0 (GLB A, macrocell 4, ORP A^4); outputs follow the bank VCCO standard and inputs are 5V tolerant only when VCCO is 3.0V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage for 1.8V Devices, ispMACH 4000Z | VCC | 1.7 | 1.9 | V | ispMACH 4000Z | 15 | |
| Junction Temperature (Commercial) | Tj | 0 | 90 | C | 15 | ||
| Supply Voltage for LVTTL I/O (VCCO) | VCCO | 3 | 3.6 | V | LVTTL | 16 | |
| Supply Voltage for LVCMOS 3.3 I/O (VCCO) | VCCO | 3 | 3.6 | V | LVCMOS 3.3 | 16 | |
| Supply Voltage for Extended LVCMOS 3.3 I/O (VCCO) | VCCO | 2.7 | 3.6 | V | Extended LVCMOS 3.3, ispMACH 4000Z only | 16 | |
| Supply Voltage for LVCMOS 2.5 I/O (VCCO) | VCCO | 2.3 | 2.7 | V | LVCMOS 2.5 | 16 | |
| Supply Voltage for LVCMOS 1.8 I/O (VCCO) | VCCO | 1.65 | 1.95 | V | LVCMOS 1.8 | 16 | |
| Supply Voltage for PCI 3.3 I/O (VCCO) | VCCO | 3 | 3.6 | V | PCI 3.3 | 16 | |
| Erase/Reprogram Cycle | 1000 | Cycles | Valid over commercial temperature range | 15 | |||
| Supply Voltage (VCC) | VCC | -0.5 | 2.5 | V | ispMACH 4000C/Z column | 15 | |
| Output Supply Voltage (VCCO) | VCCO | -0.5 | 4.5 | V | 15 | ||
| Input or I/O Tristate Voltage Applied | -0.5 | 5.5 | V | ispMACH 4000C/Z column | 15 | ||
| Storage Temperature | -65 | 150 | C | 15 | |||
| Junction Temperature (Tj) with Power Applied | Tj | -55 | 150 | C | ispMACH 4000C/Z column | 15 | |
| Input Leakage Current (ispMACH 4000Z) | IIL, IIH1, 4 | 0.5 | 1 | µA | 0 ≤ VIN < VCCO | 16 | |
| Input High Leakage Current (ispMACH 4000Z) | IIH1 | 10 | µA | VCCO < VIN ≤ 5.5V | 16 | ||
| I/O Weak Pull-up Resistor Current (ispMACH 4000Z) | IPU | -30 | -150 | µA | 0 ≤ VIN ≤ 0.7VCCO | 16 | |
| I/O Weak Pull-down Resistor Current | IPD | 30 | 150 | µA | VIL (MAX) ≤ VIN ≤ VIH (MIN) | 16 | |
| Bus Hold Low Sustaining Current | IBHLS | 30 | µA | VIN = VIL (MAX) | 16 | ||
| Bus Hold High Sustaining Current | IBHHS | -30 | µA | VIN = 0.7 VCCO | 16 | ||
| Bus Hold Low Overdrive Current | IBHLO | 150 | µA | 0V ≤ VIN ≤ VBHT | 16 | ||
| Bus Hold High Overdrive Current | IBHHO | -150 | µA | VBHT ≤ VIN ≤ VCCO | 16 | ||
| Input Low Voltage (LVCMOS 1.8) | VIL | -0.3 | V | LVCMOS 1.8 (4000C/Z) | 20 | ||
| Input High Voltage (LVCMOS 1.8) | VIH | 3.6 | V | LVCMOS 1.8 (4000C/Z) | 20 | ||
| Output Low Voltage (LVCMOS 1.8) | VOL | 0.4 | V | LVCMOS 1.8 (4000C/Z); IOL = 2.0 mA | 20 | ||
| Output Low Voltage (LVCMOS 1.8) | VOL | 0.2 | V | LVCMOS 1.8 (4000C/Z); IOL = 0.1 mA | 20 | ||
| Input Low Voltage (PCI 3.3) | VIL | -0.3 | V | PCI 3.3 (4000C/Z) | 20 | ||
| Input High Voltage (PCI 3.3) | VIH | 5.5 | V | PCI 3.3 (4000C/Z) | 20 | ||
| Standby Power Supply Current | ICC4, 5 | 13 | 20 | µA | Vcc = 1.9V, TA = 70°C | 18 | |
| Standby Power Supply Current | ICC4, 5 | 15 | 25 | µA | Vcc = 1.9V, TA = 85°C | 18 | |
| 5-PT bypass combinatorial propagation delay (-75) | tPD | 7.5 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| 20-PT combinatorial propagation delay through macrocell (-75) | tPD_MC | 8 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register setup time before clock (-75) | tS | 4.5 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register setup time before clock with T-type register (-75) | tST | 4.7 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register setup time before clock, input register path (-75) | tSIR | 1.4 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register setup time before clock with zero hold (-75) | tSIRZ | 2.7 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register hold time after clock (-75) | tH | 0 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register hold time after clock with T-type register (-75) | tHT | 0 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register hold time after clock, input register path (-75) | tHIR | 1.3 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register hold time after clock, input register path with zero hold (-75) | tHIRZ | 0 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| GLB register clock-to-output delay (-75) | tCO | 4.5 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| External reset pin to output delay (-75) | tR | 9 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| External reset pulse duration (-75) | tRW | 4 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Input to output local product term output enable/disable (-75) | tPTOE/DIS | 9 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Input to output global product term output enable/disable (-75) | tGPTOE/DIS | 10.5 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Global OE input to output enable/disable (-75) | tGOE/DIS | 7 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Global clock width, high or low (-75) | tCW | 2.8 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Global gate width low or high (-75) | tGW | 2.8 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Input register clock width, high or low (-75) | tWIR | 2.8 | ns | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Clock frequency with internal feedback (-75) | fMAX4 | 168 | MHz | Over Recommended Operating Conditions; -75 grade | 25 | ||
| Clock frequency with external feedback, [1/(tS + tCO)] (-75) | fMAX (Ext.) | 111 | MHz | Over Recommended Operating Conditions; -75 grade | 25 |
CAD (KiCad official)
- Symbol:
LC4032ZC-75TN48C - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
lc4032zc-75tn48c-etched.step/lc4032zc-75tn48c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lc4032zc-75tn48c.step/lc4032zc-75tn48c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (99 pp, sha256
33dfab1d07669e66, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).