component

Larry LED Nameplate

Public Made by Adom

by adom

72x24mm USB-C desk nameplate with 44 white LEDs spelling LARRY in a 3x5 pixel font. Plug in any iPhone charger and it lights up.

Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
Propose a change
Name Last commit message Last updated
3d.glb Migrate asset from Helium wiki 1mo ago
3d.png Migrate asset from Helium wiki 1mo ago
index.html Migrate asset from Helium wiki 1mo ago
larry-hero.png Migrate asset from Helium wiki 1mo ago
larry-led-nameplate-source.tar.gz Migrate asset from Helium wiki 1mo ago
Larry-Nameplate-3d.kicad_pcb Migrate asset from Helium wiki 1mo ago
page.json Remove internal identifiers from page.json 10d ago
pcb.png Migrate asset from Helium wiki 1mo ago
pcb.svg Migrate asset from Helium wiki 1mo ago
plan.md Migrate asset from Helium wiki 1mo ago
README.md Initial commit: component/larry-led-nameplate 1mo ago
schematic.svg Migrate asset from Helium wiki 1mo ago

Overview

A white LED desk nameplate that spells LARRY in a 3x5 bitmap pixel font. Designed as an Adom molecule (72 x 24 mm, 4-pin machine contact) so it can be manufactured on the InstaPCB workcell.

How it works

  • 44 white LEDs (0603) arranged in 5 letters: L-A-R-R-Y
  • Each LED has its own 220 ohm current-limiting resistor (0402)
  • All LED+resistor pairs wired in parallel from VBUS to GND
  • USB-C connector on the east edge with 5.1k ohm CC pull-downs
  • 100nF bypass cap on VBUS for decoupling
  • Total draw: ~400mA at 5V (2W) — any phone charger handles it

How to use it

  1. Grab any USB-C cable (iPhone charger works)
  2. Plug one end into the board's east edge
  3. Plug the other end into a 5V USB-C power source
  4. LARRY lights up white

Bill of Materials

Component Value Package Qty
LED white 0603 44
R 220 ohm 0402 44
R_CC1, R_CC2 5.1k ohm 0402 2
C_BYP 100nF 0402 1
J1 TYPE-C-31-M-12 USB-C 1

Pixel font

Each letter is a 3-wide x 5-tall grid at 3mm pitch:

L:        A:        R:        R:        Y:
X . .     . X .     X X .     X X .     X . X
X . .     X . X     X . X     X . X     X . X
X . .     X X X     X X .     X X .     . X .
X . .     X . X     X . X     X . X     . X .
X X X     X . X     X . X     X . X     . X .

LED counts: L=7, A=10, R=10, R=10, Y=7 = 44 total.

Design details

  • Board: 72 x 24 mm, 2-layer, 1.6mm FR4, round edges
  • Molecule type: 4-pin with MachinePinMediumStandard
  • 4 corner machine contacts: MC_VCC1/MC_VCC2 (north), MC_GND1/MC_GND2 (south)
  • Scaffold contacts feed the same VBUS/GND rails as USB-C — board can be powered either way
  • Pixel pitch: 3mm LED-to-LED, 4mm gap between letters
  • White LED Vf ~3.0V, so 220 ohm at 5V gives ~9mA per LED
  • USB-C on east edge using UsbCReceptacle wrapper (TYPE-C-31-M-12, JLCPCB C165948)

Built with

Authored in tscircuit (TSX), previewed with adom-tsci, published to the Adom Wiki.