← Commit history

Initial commit: component/lan9512i-jzx

Ray ·8cbfa33c4c ·
2 files changed +588
README.mdadded+101
@@ -0,0 +1,101 @@+# LAN9512I-JZX++**Microchip Tech** · Ethernet Controllers · QFN-64-EP(9x9)++LAN9512I-JZX from Microchip Tech, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | USBDM2 | bidirectional | Downstream USB peripheral 2 DMINUS differential signal. |+| 2 | USBDP2 | bidirectional | Downstream USB peripheral 2 DPLUS differential signal. |+| 3 | USBDM3 | bidirectional | Downstream USB peripheral 3 DMINUS differential signal. |+| 4 | USBDP3 | bidirectional | Downstream USB peripheral 3 DPLUS differential signal. |+| 5 | VDD33A | power_in | +3.3V analog power supply. |+| 6 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 7 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 8 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 9 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 10 | VDD33A | power_in | +3.3V analog power supply. |+| 11 | VBUS_DET | input | Upstream VBUS power detect with 5V tolerant Schmitt input; must be tied to VDD33IO for bus-powered hubs. |+| 12 | nRESET | input | Active low system reset input; allows external hardware to reset the device. |+| 13 | TEST1 | unconnected | Factory test pin; must be left unconnected for proper operation. |+| 14 | PRTCTL2 | tri_state | USB port power control 2 with open-drain output and internal pull-up; controls power to downstream USB peripheral 2. |+| 15 | VDD18CORE | power_in | +1.8V digital core power supply output from internal regulator. |+| 16 | PRTCTL3 | tri_state | USB port power control 3 with open-drain output and internal pull-up; controls power to downstream USB peripheral 3. |+| 17 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 18 | NC | unconnected | No connect pin; must be left floating for normal device operation. |+| 19 | VDD33IO | power_in | +3.3V I/O power supply. |+| 20 | nFDX_LED/GPIO0 | tri_state | Ethernet full-duplex indicator LED and general purpose I/O 0; open-drain output driven low when operating in full-duplex mode. |+| 21 | nLNKA_LED/GPIO1 | tri_state | Ethernet link activity indicator LED and general purpose I/O 1; open-drain output pulsed to indicate transmit/receive activity. |+| 22 | nSPD_LED/GPIO2 | tri_state | Ethernet speed indicator LED and general purpose I/O 2; open-drain output driven low at 100 Mbps or during auto-negotiation. |+| 23 | EECLK | output | EEPROM clock output with 8 mA sink/source capability; drives the external EEPROM clock. |+| 24 | EECS | output | EEPROM chip select output with 8 mA sink/source capability; drives the external EEPROM chip select. |+| 25 | EEDO | output | EEPROM data output with 8 mA sink/source capability; drives the EEDI input of the external EEPROM. |+| 26 | EEDI | input | EEPROM data input with internal pull-down; receives data from EEDO output of external EEPROM. |+| 27 | VDD33IO | power_in | +3.3V I/O power supply. |+| 28 | nTRST | input | JTAG test port reset (active low) with internal pull-up; must be tied high if not used. |+| 29 | TMS | input | JTAG test mode select with Schmitt trigger. |+| 30 | TDI | input | JTAG test data input with Schmitt trigger. |+| 31 | TDO | output | JTAG test data output with 12 mA sink/source capability. |+| 32 | TCK | input | JTAG test clock with Schmitt trigger; should be tied high through 10 kΩ resistor if not used. |+| 33 | VDD33IO | power_in | +3.3V I/O power supply. |+| 34 | TEST2 | power_in | Factory test pin; must be connected to VSS for proper operation. |+| 35 | GPIO3 | tri_state | General purpose I/O 3 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input. |+| 36 | GPIO4 | tri_state | General purpose I/O 4 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input. |+| 37 | GPIO5 | tri_state | General purpose I/O 5 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input. |+| 38 | VDD18CORE | power_in | +1.8V digital core power supply output from internal regulator. |+| 39 | VDD33IO | power_in | +3.3V I/O power supply. |+| 40 | TEST3 | power_in | Factory test pin; must be connected to VDD33IO for proper operation. |+| 41 | AUTOMDIX_EN | input | Auto-MDIX enable with Schmitt trigger; high enables Auto-MDIX, low disables it. |+| 42 | GPIO6 | tri_state | General purpose I/O 6 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input. |+| 43 | GPIO7 | tri_state | General purpose I/O 7 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input. |+| 44 | CLK24_EN | input | 24 MHz clock enable with Schmitt trigger input. |+| 45 | CLK24_OUT | output | 24 MHz clock output with 8 mA sink/source capability; provides reference clock for partner hub. |+| 46 | VDD33IO | power_in | +3.3V I/O power supply. |+| 47 | TEST4 | unconnected | Factory test pin; must be left unconnected for proper operation. |+| 48 | VDD18ETHPLL | power_in | Ethernet PLL +1.8V power supply. |+| 49 | VDD33A | power_in | +3.3V analog power supply. |+| 50 | EXRES | input | External Ethernet PHY bias resistor connection; connect to external 12.4K 1.0% resistor to ground for internal bias circuits. |+| 51 | VDD33A | power_in | +3.3V analog power supply. |+| 52 | RXP | bidirectional | Ethernet RX data in positive with analog bidirectional signal; may swap with transmit when Auto-MDIX enabled. |+| 53 | RXN | bidirectional | Ethernet RX data in negative with analog bidirectional signal; may swap with transmit when Auto-MDIX enabled. |+| 54 | VDD33A | power_in | +3.3V analog power supply. |+| 55 | TXP | bidirectional | Ethernet TX data out positive with analog bidirectional signal; may swap with receive when Auto-MDIX enabled. |+| 56 | TXN | bidirectional | Ethernet TX data out negative with analog bidirectional signal; may swap with receive when Auto-MDIX enabled. |+| 57 | VDD33A | power_in | +3.3V analog power supply. |+| 58 | USBDM0 | bidirectional | Upstream USB DMINUS 0 with analog bidirectional differential signal. |+| 59 | USBDP0 | bidirectional | Upstream USB DPLUS 0 with analog bidirectional differential signal with integrated pull-up resistor. |+| 60 | XO | output | External 25 MHz crystal oscillator output. |+| 61 | XI | input | External 25 MHz crystal oscillator input; can also be driven by single-ended clock oscillator. |+| 62 | VDD18USBPLL | power_in | USB PLL +1.8V power supply. |+| 63 | USBRBIAS | input | External USB bias resistor connection; connect to external 12K 1.0% resistor to ground for HS transmit current and on-chip termination impedance. |+| 64 | VDD33A | power_in | +3.3V analog power supply. |+| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-64-EP(9x9) |+| Category | Interface |+| Pins | 65 |++## CAD (KiCad official)++- Symbol: `LAN9512I-JZX`+- Footprint: `Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm`+- 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)+- 3D model files: `lan9512i-jzx-etched.step` / `lan9512i-jzx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lan9512i-jzx.step` / `lan9512i-jzx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589806487338971136) (52 pp, sha256 `35af6d6fd0e76bea`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan9512i-jzx-datasheet.pdf)
page.jsonadded+487
@@ -0,0 +1,487 @@+{+  "slug": "lan9512i-jzx",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech Ethernet Controllers, QFN-64-EP(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lan9512i-jzx",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lan9512i-jzx.kicad_sym",+    "lan9512i-jzx.kicad_mod",+    "lan9512i-jzx.glb",+    "lan9512i-jzx.step",+    "lan9512i-jzx.lbr",+    "docs/hero.png",+    "docs/lan9512i-jzx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LAN9512I-JZX",+    "manufacturer": "Microchip Tech",+    "package": "QFN-64-EP(9x9)",+    "pin_count": 65,+    "category": "Interface",+    "subcategory": "Ethernet Controllers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589806487338971136",+    "parts": {+      "symbol": "lan9512i-jzx.kicad_sym",+      "footprint": "lan9512i-jzx.kicad_mod",+      "model_3d": "lan9512i-jzx-etched.glb",+      "model_3d_plain": "lan9512i-jzx.glb",+      "model_3d_step": "lan9512i-jzx-etched.step",+      "model_3d_step_plain": "lan9512i-jzx.step",+      "lbr": "lan9512i-jzx.lbr"+    },+    "distributor_links": {+      "lcsc": "C633505"+    },+    "pins": [+      {+        "number": "1",+        "name": "USBDM2",+        "type": "bidirectional",+        "description": "Downstream USB peripheral 2 DMINUS differential signal."+      },+      {+        "number": "2",+        "name": "USBDP2",+        "type": "bidirectional",+        "description": "Downstream USB peripheral 2 DPLUS differential signal."+      },+      {+        "number": "3",+        "name": "USBDM3",+        "type": "bidirectional",+        "description": "Downstream USB peripheral 3 DMINUS differential signal."+      },+      {+        "number": "4",+        "name": "USBDP3",+        "type": "bidirectional",+        "description": "Downstream USB peripheral 3 DPLUS differential signal."+      },+      {+        "number": "5",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "10",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "11",+        "name": "VBUS_DET",+        "type": "input",+        "description": "Upstream VBUS power detect with 5V tolerant Schmitt input; must be tied to VDD33IO for bus-powered hubs."+      },+      {+        "number": "12",+        "name": "nRESET",+        "type": "input",+        "description": "Active low system reset input; allows external hardware to reset the device."+      },+      {+        "number": "13",+        "name": "TEST1",+        "type": "unconnected",+        "description": "Factory test pin; must be left unconnected for proper operation."+      },+      {+        "number": "14",+        "name": "PRTCTL2",+        "type": "tri_state",+        "description": "USB port power control 2 with open-drain output and internal pull-up; controls power to downstream USB peripheral 2."+      },+      {+        "number": "15",+        "name": "VDD18CORE",+        "type": "power_in",+        "description": "+1.8V digital core power supply output from internal regulator."+      },+      {+        "number": "16",+        "name": "PRTCTL3",+        "type": "tri_state",+        "description": "USB port power control 3 with open-drain output and internal pull-up; controls power to downstream USB peripheral 3."+      },+      {+        "number": "17",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "18",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect pin; must be left floating for normal device operation."+      },+      {+        "number": "19",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "20",+        "name": "nFDX_LED/GPIO0",+        "type": "tri_state",+        "description": "Ethernet full-duplex indicator LED and general purpose I/O 0; open-drain output driven low when operating in full-duplex mode."+      },+      {+        "number": "21",+        "name": "nLNKA_LED/GPIO1",+        "type": "tri_state",+        "description": "Ethernet link activity indicator LED and general purpose I/O 1; open-drain output pulsed to indicate transmit/receive activity."+      },+      {+        "number": "22",+        "name": "nSPD_LED/GPIO2",+        "type": "tri_state",+        "description": "Ethernet speed indicator LED and general purpose I/O 2; open-drain output driven low at 100 Mbps or during auto-negotiation."+      },+      {+        "number": "23",+        "name": "EECLK",+        "type": "output",+        "description": "EEPROM clock output with 8 mA sink/source capability; drives the external EEPROM clock."+      },+      {+        "number": "24",+        "name": "EECS",+        "type": "output",+        "description": "EEPROM chip select output with 8 mA sink/source capability; drives the external EEPROM chip select."+      },+      {+        "number": "25",+        "name": "EEDO",+        "type": "output",+        "description": "EEPROM data output with 8 mA sink/source capability; drives the EEDI input of the external EEPROM."+      },+      {+        "number": "26",+        "name": "EEDI",+        "type": "input",+        "description": "EEPROM data input with internal pull-down; receives data from EEDO output of external EEPROM."+      },+      {+        "number": "27",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "28",+        "name": "nTRST",+        "type": "input",+        "description": "JTAG test port reset (active low) with internal pull-up; must be tied high if not used."+      },+      {+        "number": "29",+        "name": "TMS",+        "type": "input",+        "description": "JTAG test mode select with Schmitt trigger."+      },+      {+        "number": "30",+        "name": "TDI",+        "type": "input",+        "description": "JTAG test data input with Schmitt trigger."+      },+      {+        "number": "31",+        "name": "TDO",+        "type": "output",+        "description": "JTAG test data output with 12 mA sink/source capability."+      },+      {+        "number": "32",+        "name": "TCK",+        "type": "input",+        "description": "JTAG test clock with Schmitt trigger; should be tied high through 10 kΩ resistor if not used."+      },+      {+        "number": "33",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "34",+        "name": "TEST2",+        "type": "power_in",+        "description": "Factory test pin; must be connected to VSS for proper operation."+      },+      {+        "number": "35",+        "name": "GPIO3",+        "type": "tri_state",+        "description": "General purpose I/O 3 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input."+      },+      {+        "number": "36",+        "name": "GPIO4",+        "type": "tri_state",+        "description": "General purpose I/O 4 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input."+      },+      {+        "number": "37",+        "name": "GPIO5",+        "type": "tri_state",+        "description": "General purpose I/O 5 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input."+      },+      {+        "number": "38",+        "name": "VDD18CORE",+        "type": "power_in",+        "description": "+1.8V digital core power supply output from internal regulator."+      },+      {+        "number": "39",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "40",+        "name": "TEST3",+        "type": "power_in",+        "description": "Factory test pin; must be connected to VDD33IO for proper operation."+      },+      {+        "number": "41",+        "name": "AUTOMDIX_EN",+        "type": "input",+        "description": "Auto-MDIX enable with Schmitt trigger; high enables Auto-MDIX, low disables it."+      },+      {+        "number": "42",+        "name": "GPIO6",+        "type": "tri_state",+        "description": "General purpose I/O 6 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input."+      },+      {+        "number": "43",+        "name": "GPIO7",+        "type": "tri_state",+        "description": "General purpose I/O 7 with 8 mA sink/source and internal pull-up; programmable as push-pull output, open-drain output, or Schmitt input."+      },+      {+        "number": "44",+        "name": "CLK24_EN",+        "type": "input",+        "description": "24 MHz clock enable with Schmitt trigger input."+      },+      {+        "number": "45",+        "name": "CLK24_OUT",+        "type": "output",+        "description": "24 MHz clock output with 8 mA sink/source capability; provides reference clock for partner hub."+      },+      {+        "number": "46",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "47",+        "name": "TEST4",+        "type": "unconnected",+        "description": "Factory test pin; must be left unconnected for proper operation."+      },+      {+        "number": "48",+        "name": "VDD18ETHPLL",+        "type": "power_in",+        "description": "Ethernet PLL +1.8V power supply."+      },+      {+        "number": "49",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "50",+        "name": "EXRES",+        "type": "input",+        "description": "External Ethernet PHY bias resistor connection; connect to external 12.4K 1.0% resistor to ground for internal bias circuits."+      },+      {+        "number": "51",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "52",+        "name": "RXP",+        "type": "bidirectional",+        "description": "Ethernet RX data in positive with analog bidirectional signal; may swap with transmit when Auto-MDIX enabled."+      },+      {+        "number": "53",+        "name": "RXN",+        "type": "bidirectional",+        "description": "Ethernet RX data in negative with analog bidirectional signal; may swap with transmit when Auto-MDIX enabled."+      },+      {+        "number": "54",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "55",+        "name": "TXP",+        "type": "bidirectional",+        "description": "Ethernet TX data out positive with analog bidirectional signal; may swap with receive when Auto-MDIX enabled."+      },+      {+        "number": "56",+        "name": "TXN",+        "type": "bidirectional",+        "description": "Ethernet TX data out negative with analog bidirectional signal; may swap with receive when Auto-MDIX enabled."+      },+      {+        "number": "57",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "58",+        "name": "USBDM0",+        "type": "bidirectional",+        "description": "Upstream USB DMINUS 0 with analog bidirectional differential signal."+      },+      {+        "number": "59",+        "name": "USBDP0",+        "type": "bidirectional",+        "description": "Upstream USB DPLUS 0 with analog bidirectional differential signal with integrated pull-up resistor."+      },+      {+        "number": "60",+        "name": "XO",+        "type": "output",+        "description": "External 25 MHz crystal oscillator output."+      },+      {+        "number": "61",+        "name": "XI",+        "type": "input",+        "description": "External 25 MHz crystal oscillator input; can also be driven by single-ended clock oscillator."+      },+      {+        "number": "62",+        "name": "VDD18USBPLL",+        "type": "power_in",+        "description": "USB PLL +1.8V power supply."+      },+      {+        "number": "63",+        "name": "USBRBIAS",+        "type": "input",+        "description": "External USB bias resistor connection; connect to external 12K 1.0% resistor to ground for HS transmit current and on-chip termination impedance."+      },+      {+        "number": "64",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "65",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad (bottom of package) is VSS/ground and must be connected to ground but does not have a nu",+          "exposed pad 65 added from the footprint",+          "9/65 pins cited to the wrong page (name found elsewhere): ['13:TEST1@p9', '34:TEST2@p9', '40:TEST3@p9', '41:AUTOMDIX_EN@p9']"+        ],+        "pages_sent": 52,+        "cost_usd": 0.6387,+        "at": "2026-09-18T02:41:22"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589806487338971136",+        "pages": 52,+        "sha256": "35af6d6fd0e76bea",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 65,+        "described": 65,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file