← Commit history

Initial commit: component/lan9500a-abzj-tr

Ray ·a682aee0dc ·
2 files changed +533
README.mdadded+93
@@ -0,0 +1,93 @@+# LAN9500A-ABZJ-TR++**Microchip Tech** · USB Converters · QFN-56-EP(8x8)++LAN9500A-ABZJ-TR from Microchip Tech, in a QFN-56-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | nPHY_INT | output | PHY interrupt output in internal PHY mode (active high, O8) or PHY interrupt input in external PHY mode (active low, IS). |+| 2 | TXN | bidirectional | Ethernet transmit negative differential signal; may be swapped with RXN when Auto-MDIX is enabled. |+| 3 | TXP | bidirectional | Ethernet transmit positive differential signal; may be swapped with RXP when Auto-MDIX is enabled. |+| 4 | VDD33A | power_in | +3.3V analog power supply. |+| 5 | RXN | bidirectional | Ethernet receive negative differential signal; may be swapped with TXN when Auto-MDIX is enabled. |+| 6 | RXP | bidirectional | Ethernet receive positive differential signal; may be swapped with TXP when Auto-MDIX is enabled. |+| 7 | NC | unconnected | No-connect pin for LAN9500A/LAN9500Ai; may be connected to VDD33A for backward compatibility with LAN9500/LAN9500i. |+| 8 | EXRES | passive | External bias resistor connection; connect 12.0K ±1.0% resistor to ground for LAN9500A/LAN9500Ai. |+| 9 | VDD33A | power_in | +3.3V analog power supply. |+| 10 | VDDPLL | power_in | Ethernet PLL power supply; must be connected to VDDCORE for proper operation. |+| 11 | USBDM | bidirectional | USB data minus signal; functionality may be swapped with USBDP via PORT_SWAP configuration strap. |+| 12 | USBDP | bidirectional | USB data plus signal; functionality may be swapped with USBDM via PORT_SWAP configuration strap. |+| 13 | TEST2 | power_in | Test pin; must be connected to VSS for proper operation. |+| 14 | NC | unconnected | No-connect pin; must be left floating for normal device operation. |+| 15 | VDD33A | power_in | +3.3V analog power supply. |+| 16 | USBRBIAS | passive | External USB bias resistor connection; connect 12K ±1.0% resistor to ground for setting HS transmit current and on-chip termination impedance. |+| 17 | VDDUSBPLL | power_in | USB PLL power supply; must be connected to VDDCORE for proper operation. |+| 18 | XI | input | External 25 MHz crystal oscillator input; may alternatively be driven by single-ended clock oscillator. |+| 19 | XO | output | External 25 MHz crystal oscillator output; leave unconnected when XI is driven by single-ended clock. |+| 20 | VBUS_DET | input | USB bus power detection input; 5V tolerant Schmitt-triggered input; for bus-powered applications must be tied to VDD33IO. |+| 21 | VDDCORE | power_out | Digital core power supply output from internal regulator; powers core logic, Ethernet PLL, and USB PLL. |+| 22 | MDC/GPIO2 | output | Management data clock output to external PHY in external PHY mode, or GPIO2 in internal PHY mode. |+| 23 | MDIO/GPIO1 | bidirectional | Management data input/output to/from external PHY in external PHY mode, or GPIO1 in internal PHY mode. |+| 24 | nRESET | input | System reset input; active-low pin allowing external hardware to reset device or signal PME_CLEAR (LAN9500A/LAN9500Ai). |+| 25 | VDD33IO | power_in | +3.3V I/O power supply. |+| 26 | nFDX_LED/GPIO8 | output | Full-duplex indicator LED output driven low when operating in full-duplex mode, or GPIO8 in internal PHY mode. |+| 27 | nLNKA_LED/GPIO9 | output | Link activity indicator LED output driven low for valid link and pulsed for activity, or GPIO9 in internal PHY mode. |+| 28 | nSPD_LED/GPIO10 | output | Speed indicator LED output driven low for 100 Mbps or auto-negotiation, high for 10 Mbps, or GPIO10 in internal PHY mode. |+| 29 | EECLK/PWR_SEL | output | EEPROM clock output to external EEPROM, or PWR_SEL configuration strap determining default bus/self-powered mode. |+| 30 | EECS | output | EEPROM chip select output; may tri-state briefly during power-up; external pull-down resistor recommended. |+| 31 | EEDO/AUTOMDIX_EN | output | EEPROM data output to EEDI input of external EEPROM, or AUTOMDIX_EN configuration strap determining default Auto-MDIX setting. |+| 32 | EEDI | input | EEPROM data input from EEDO output of external EEPROM. |+| 33 | TEST3 | power_in | Test pin; must be connected to VSS for proper operation. |+| 34 | PHY_SEL | input | PHY selection configuration input; 0 selects internal PHY, 1 selects external PHY; internal PHY placed in power down when external mode selected. |+| 35 | VDD33IO | power_in | +3.3V I/O power supply. |+| 36 | nTRST/RXD0 | input | JTAG test port reset input (active low) in internal PHY mode, or RXD0 receive data input in external PHY mode. |+| 37 | TDO/nPHY_RST | output | JTAG test data output in internal PHY mode, or nPHY_RST PHY reset output (active low) in external PHY mode. |+| 38 | TCK/RXD1 | input | JTAG test clock input (maximum 25 MHz) in internal PHY mode, or RXD1 receive data input in external PHY mode. |+| 39 | TMS/RXD2 | input | JTAG test mode select input in internal PHY mode, or RXD2 receive data input in external PHY mode. |+| 40 | TDI/RXD3 | input | JTAG test data input in internal PHY mode, or RXD3 receive data input in external PHY mode. |+| 41 | RXCLK | input | Receive clock input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode. |+| 42 | RXDV | input | Receive data valid input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode. |+| 43 | TXEN | output | Transmit enable output to external PHY indicating valid data on TXD[3:0] in external PHY mode, or internal MII signal in internal PHY mode. |+| 44 | RXER | input | Receive error input from external PHY indicating receive error in packet in external PHY mode, or internal MII signal in internal PHY mode. |+| 45 | CRS/GPIO3 | bidirectional | Carrier sense input from external PHY in external PHY mode, or GPIO3 (programmable input/output) in internal PHY mode. |+| 46 | COL/GPIO0 | bidirectional | MII collision detect input from external PHY in external PHY mode, or GPIO0 (programmable input/output, with PME signaling capability for LAN9500A/LAN9500Ai) in internal PHY mode. |+| 47 | TXCLK | input | Transmit clock input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode. |+| 48 | VDD33IO | power_in | +3.3V I/O power supply. |+| 49 | TEST1 | power_in | Test pin; must be connected to VDD33IO for proper operation. |+| 50 | VDDCORE | power_out | Digital core power supply output from internal regulator; powers core logic, Ethernet PLL, and USB PLL. |+| 51 | VDD33IO | power_in | +3.3V I/O power supply. |+| 52 | VDD33IO | power_in | +3.3V I/O power supply. |+| 53 | TXD3/GPIO7/EEP_SIZE | output | Transmit data 3 output to external PHY in external PHY mode, GPIO7 (programmable with PHY Link Up wake functionality for LAN9500A/LAN9500Ai) in internal PHY mode, or EEP_SIZE configuration strap selecting EEPROM size. |+| 54 | TXD2/GPIO6/PORT_SWAP | output | Transmit data 2 output to external PHY in external PHY mode, GPIO6 (programmable) in internal PHY mode, or PORT_SWAP configuration strap for USB port mapping. |+| 55 | TXD1/GPIO5/RMT_WKP | output | Transmit data 1 output to external PHY in external PHY mode, GPIO5 (programmable) in internal PHY mode, or RMT_WKP configuration strap enabling remote wakeup support. |+| 56 | TXD0/GPIO4/EEP_DISABLE | output | Transmit data 0 output to external PHY in external PHY mode, GPIO4 (programmable) in internal PHY mode, or EEP_DISABLE configuration strap disabling EEPROM autoload. |+| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-56-EP(8x8) |+| Category | Interface |+| Pins | 57 |++## CAD (KiCad official)++- Symbol: `LAN9500A-ABZJ-TR`+- Footprint: `Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm`+- 3D model: QFN-56-EP(8x8) (KiCad packages3D, STEP)+- 3D model files: `lan9500a-abzj-tr-etched.step` / `lan9500a-abzj-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lan9500a-abzj-tr.step` / `lan9500a-abzj-tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942316061544448) (213 pp, sha256 `9daaaa5976e22064`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan9500a-abzj-tr-datasheet.pdf)
page.jsonadded+440
@@ -0,0 +1,440 @@+{+  "slug": "lan9500a-abzj-tr",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech USB Converters, QFN-56-EP(8x8). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lan9500a-abzj-tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lan9500a-abzj-tr.kicad_sym",+    "lan9500a-abzj-tr.kicad_mod",+    "lan9500a-abzj-tr.glb",+    "lan9500a-abzj-tr.step",+    "lan9500a-abzj-tr.lbr",+    "docs/hero.png",+    "docs/lan9500a-abzj-tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LAN9500A-ABZJ-TR",+    "manufacturer": "Microchip Tech",+    "package": "QFN-56-EP(8x8)",+    "pin_count": 57,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942316061544448",+    "parts": {+      "symbol": "lan9500a-abzj-tr.kicad_sym",+      "footprint": "lan9500a-abzj-tr.kicad_mod",+      "model_3d": "lan9500a-abzj-tr-etched.glb",+      "model_3d_plain": "lan9500a-abzj-tr.glb",+      "model_3d_step": "lan9500a-abzj-tr-etched.step",+      "model_3d_step_plain": "lan9500a-abzj-tr.step",+      "lbr": "lan9500a-abzj-tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2651877"+    },+    "pins": [+      {+        "number": "1",+        "name": "nPHY_INT",+        "type": "output",+        "description": "PHY interrupt output in internal PHY mode (active high, O8) or PHY interrupt input in external PHY mode (active low, IS)."+      },+      {+        "number": "2",+        "name": "TXN",+        "type": "bidirectional",+        "description": "Ethernet transmit negative differential signal; may be swapped with RXN when Auto-MDIX is enabled."+      },+      {+        "number": "3",+        "name": "TXP",+        "type": "bidirectional",+        "description": "Ethernet transmit positive differential signal; may be swapped with RXP when Auto-MDIX is enabled."+      },+      {+        "number": "4",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "5",+        "name": "RXN",+        "type": "bidirectional",+        "description": "Ethernet receive negative differential signal; may be swapped with TXN when Auto-MDIX is enabled."+      },+      {+        "number": "6",+        "name": "RXP",+        "type": "bidirectional",+        "description": "Ethernet receive positive differential signal; may be swapped with TXP when Auto-MDIX is enabled."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No-connect pin for LAN9500A/LAN9500Ai; may be connected to VDD33A for backward compatibility with LAN9500/LAN9500i."+      },+      {+        "number": "8",+        "name": "EXRES",+        "type": "passive",+        "description": "External bias resistor connection; connect 12.0K ±1.0% resistor to ground for LAN9500A/LAN9500Ai."+      },+      {+        "number": "9",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "10",+        "name": "VDDPLL",+        "type": "power_in",+        "description": "Ethernet PLL power supply; must be connected to VDDCORE for proper operation."+      },+      {+        "number": "11",+        "name": "USBDM",+        "type": "bidirectional",+        "description": "USB data minus signal; functionality may be swapped with USBDP via PORT_SWAP configuration strap."+      },+      {+        "number": "12",+        "name": "USBDP",+        "type": "bidirectional",+        "description": "USB data plus signal; functionality may be swapped with USBDM via PORT_SWAP configuration strap."+      },+      {+        "number": "13",+        "name": "TEST2",+        "type": "power_in",+        "description": "Test pin; must be connected to VSS for proper operation."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "No-connect pin; must be left floating for normal device operation."+      },+      {+        "number": "15",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "16",+        "name": "USBRBIAS",+        "type": "passive",+        "description": "External USB bias resistor connection; connect 12K ±1.0% resistor to ground for setting HS transmit current and on-chip termination impedance."+      },+      {+        "number": "17",+        "name": "VDDUSBPLL",+        "type": "power_in",+        "description": "USB PLL power supply; must be connected to VDDCORE for proper operation."+      },+      {+        "number": "18",+        "name": "XI",+        "type": "input",+        "description": "External 25 MHz crystal oscillator input; may alternatively be driven by single-ended clock oscillator."+      },+      {+        "number": "19",+        "name": "XO",+        "type": "output",+        "description": "External 25 MHz crystal oscillator output; leave unconnected when XI is driven by single-ended clock."+      },+      {+        "number": "20",+        "name": "VBUS_DET",+        "type": "input",+        "description": "USB bus power detection input; 5V tolerant Schmitt-triggered input; for bus-powered applications must be tied to VDD33IO."+      },+      {+        "number": "21",+        "name": "VDDCORE",+        "type": "power_out",+        "description": "Digital core power supply output from internal regulator; powers core logic, Ethernet PLL, and USB PLL."+      },+      {+        "number": "22",+        "name": "MDC/GPIO2",+        "type": "output",+        "description": "Management data clock output to external PHY in external PHY mode, or GPIO2 in internal PHY mode."+      },+      {+        "number": "23",+        "name": "MDIO/GPIO1",+        "type": "bidirectional",+        "description": "Management data input/output to/from external PHY in external PHY mode, or GPIO1 in internal PHY mode."+      },+      {+        "number": "24",+        "name": "nRESET",+        "type": "input",+        "description": "System reset input; active-low pin allowing external hardware to reset device or signal PME_CLEAR (LAN9500A/LAN9500Ai)."+      },+      {+        "number": "25",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "26",+        "name": "nFDX_LED/GPIO8",+        "type": "output",+        "description": "Full-duplex indicator LED output driven low when operating in full-duplex mode, or GPIO8 in internal PHY mode."+      },+      {+        "number": "27",+        "name": "nLNKA_LED/GPIO9",+        "type": "output",+        "description": "Link activity indicator LED output driven low for valid link and pulsed for activity, or GPIO9 in internal PHY mode."+      },+      {+        "number": "28",+        "name": "nSPD_LED/GPIO10",+        "type": "output",+        "description": "Speed indicator LED output driven low for 100 Mbps or auto-negotiation, high for 10 Mbps, or GPIO10 in internal PHY mode."+      },+      {+        "number": "29",+        "name": "EECLK/PWR_SEL",+        "type": "output",+        "description": "EEPROM clock output to external EEPROM, or PWR_SEL configuration strap determining default bus/self-powered mode."+      },+      {+        "number": "30",+        "name": "EECS",+        "type": "output",+        "description": "EEPROM chip select output; may tri-state briefly during power-up; external pull-down resistor recommended."+      },+      {+        "number": "31",+        "name": "EEDO/AUTOMDIX_EN",+        "type": "output",+        "description": "EEPROM data output to EEDI input of external EEPROM, or AUTOMDIX_EN configuration strap determining default Auto-MDIX setting."+      },+      {+        "number": "32",+        "name": "EEDI",+        "type": "input",+        "description": "EEPROM data input from EEDO output of external EEPROM."+      },+      {+        "number": "33",+        "name": "TEST3",+        "type": "power_in",+        "description": "Test pin; must be connected to VSS for proper operation."+      },+      {+        "number": "34",+        "name": "PHY_SEL",+        "type": "input",+        "description": "PHY selection configuration input; 0 selects internal PHY, 1 selects external PHY; internal PHY placed in power down when external mode selected."+      },+      {+        "number": "35",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "36",+        "name": "nTRST/RXD0",+        "type": "input",+        "description": "JTAG test port reset input (active low) in internal PHY mode, or RXD0 receive data input in external PHY mode."+      },+      {+        "number": "37",+        "name": "TDO/nPHY_RST",+        "type": "output",+        "description": "JTAG test data output in internal PHY mode, or nPHY_RST PHY reset output (active low) in external PHY mode."+      },+      {+        "number": "38",+        "name": "TCK/RXD1",+        "type": "input",+        "description": "JTAG test clock input (maximum 25 MHz) in internal PHY mode, or RXD1 receive data input in external PHY mode."+      },+      {+        "number": "39",+        "name": "TMS/RXD2",+        "type": "input",+        "description": "JTAG test mode select input in internal PHY mode, or RXD2 receive data input in external PHY mode."+      },+      {+        "number": "40",+        "name": "TDI/RXD3",+        "type": "input",+        "description": "JTAG test data input in internal PHY mode, or RXD3 receive data input in external PHY mode."+      },+      {+        "number": "41",+        "name": "RXCLK",+        "type": "input",+        "description": "Receive clock input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode."+      },+      {+        "number": "42",+        "name": "RXDV",+        "type": "input",+        "description": "Receive data valid input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode."+      },+      {+        "number": "43",+        "name": "TXEN",+        "type": "output",+        "description": "Transmit enable output to external PHY indicating valid data on TXD[3:0] in external PHY mode, or internal MII signal in internal PHY mode."+      },+      {+        "number": "44",+        "name": "RXER",+        "type": "input",+        "description": "Receive error input from external PHY indicating receive error in packet in external PHY mode, or internal MII signal in internal PHY mode."+      },+      {+        "number": "45",+        "name": "CRS/GPIO3",+        "type": "bidirectional",+        "description": "Carrier sense input from external PHY in external PHY mode, or GPIO3 (programmable input/output) in internal PHY mode."+      },+      {+        "number": "46",+        "name": "COL/GPIO0",+        "type": "bidirectional",+        "description": "MII collision detect input from external PHY in external PHY mode, or GPIO0 (programmable input/output, with PME signaling capability for LAN9500A/LAN9500Ai) in internal PHY mode."+      },+      {+        "number": "47",+        "name": "TXCLK",+        "type": "input",+        "description": "Transmit clock input from external PHY in external PHY mode, or internal MII signal (configurable via IME bit) in internal PHY mode."+      },+      {+        "number": "48",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "49",+        "name": "TEST1",+        "type": "power_in",+        "description": "Test pin; must be connected to VDD33IO for proper operation."+      },+      {+        "number": "50",+        "name": "VDDCORE",+        "type": "power_out",+        "description": "Digital core power supply output from internal regulator; powers core logic, Ethernet PLL, and USB PLL."+      },+      {+        "number": "51",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "52",+        "name": "VDD33IO",+        "type": "power_in",+        "description": "+3.3V I/O power supply."+      },+      {+        "number": "53",+        "name": "TXD3/GPIO7/EEP_SIZE",+        "type": "output",+        "description": "Transmit data 3 output to external PHY in external PHY mode, GPIO7 (programmable with PHY Link Up wake functionality for LAN9500A/LAN9500Ai) in internal PHY mode, or EEP_SIZE configuration strap selecting EEPROM size."+      },+      {+        "number": "54",+        "name": "TXD2/GPIO6/PORT_SWAP",+        "type": "output",+        "description": "Transmit data 2 output to external PHY in external PHY mode, GPIO6 (programmable) in internal PHY mode, or PORT_SWAP configuration strap for USB port mapping."+      },+      {+        "number": "55",+        "name": "TXD1/GPIO5/RMT_WKP",+        "type": "output",+        "description": "Transmit data 1 output to external PHY in external PHY mode, GPIO5 (programmable) in internal PHY mode, or RMT_WKP configuration strap enabling remote wakeup support."+      },+      {+        "number": "56",+        "name": "TXD0/GPIO4/EEP_DISABLE",+        "type": "output",+        "description": "Transmit data 0 output to external PHY in external PHY mode, GPIO4 (programmable) in internal PHY mode, or EEP_DISABLE configuration strap disabling EEPROM autoload."+      },+      {+        "number": "57",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Multi-function pins with mode-dependent behavior: Pins 22-23 (MDC/MDIO), 26-28 (LED indicators), 36-; Configuration strap pins: Pins 20 (VBUS_DET), 29 (PWR_SEL), 31 (AUTOMDIX_EN), 34 (PHY_SEL), 53 (EEP_",+          "exposed pad 57 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint",+          "21/57 pins cited to the wrong page (name found elsewhere): ['13:TEST2@p19', '26:nFDX_LED/GPIO8@p18', '27:nLNKA_LED/GPIO9@p18', '28:nSPD_LED/GPIO10@p19']"+        ],+        "pages_sent": 28,+        "cost_usd": 0.5298,+        "at": "2026-09-21T23:11:42"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588942316061544448",+        "pages": 213,+        "sha256": "9daaaa5976e22064",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 57,+        "described": 57,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file