main
History Download
Ray Publish 0.1.0 2c936e7

LAN9360C-I

Microchip Tech · Interface - Specialized · TFBGA-100(9x9)

LAN9360C-I from Microchip Tech, in a TFBGA-100(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
E2 SCKTK bidirectional Audio Port A serial clock for transmit data (GPIO), input with pull-up and Schmitt trigger in reset state.
J3 SCKRK bidirectional Audio Port A serial clock for receive data (GPIO), input with pull-up and Schmitt trigger in reset state.
E1 FSYTF bidirectional Audio Port A frame sync for transmit data, input/output.
G4 FSYRF bidirectional Audio Port A frame sync for receive data, input/output (GPIO_AD).
K9 SRA input Audio Port A serial data input.
G3 SXA output Audio Port A serial data output (GPIO).
C10 CK bidirectional Audio Port B serial clock, input/output (GPIO_AD), input with pull-up and Schmitt trigger in reset state.
J6 WS bidirectional Audio Port B word select, input/output.
J5 DI input Audio Port B serial data input.
C7 DO output Audio Port B serial data output (GPIO).
F8 REFCLK0 output Reference clock 0 output that drives the clock reference of the external PLL for the audio clock; shared with 1PPS measurement signal and ERASE input, input with pull-down in reset state.
K8 REFCLK1 output Reference clock 1 output (GPIO_AD), input with pull-up and Schmitt trigger in reset state.
G2 MCLK output Master clock output of the audio clock port.
J1 PLLDIVSEL output PLL divider select of the audio clock port.
H8 REFCLKIN input Reference clock 0 input.
A9 EVIN input Event input for timestamping (GPIO).
H7 UNLOCK output Media clock unlock output that signals synchronization failures at startup and during runtime.
H1 PCS bidirectional SPI peripheral chip select, output in master mode and input in slave mode; pull-up and Schmitt trigger in reset state.
K3 MISO bidirectional SPI master in slave out, input in master mode and output in slave mode.
H5 MOSI bidirectional SPI master out slave in, output in master mode and input in slave mode.
J4 SPCK bidirectional SPI serial clock, output in master mode and input in slave mode.
G1 IRQ output SPI interrupt request output.
K1 FC output SPI flow control output.
A2 XOUT output 12 MHz crystal output, high impedance in reset state.
A1 XIN input 12 MHz crystal input.
C1 GTXCK input Ethernet RMII transmit clock input only, which must be provided with a 50 MHz external oscillator.
D2 GTXEN output Ethernet RMII transmit enable output.
E3 GTX0 output Ethernet RMII transmit data bit 0 output.
B5 GTX1 output Ethernet RMII transmit data bit 1 output.
A5 GRXDV input Ethernet RMII receive data valid input (GPIO_CLK).
D5 GRX0 input Ethernet RMII receive data bit 0 input.
B6 GRX1 input Ethernet RMII receive data bit 1 input.
A6 GRXER input Ethernet RMII receive error input.
B7 GMDC output Ethernet management data clock output.
B8 GMDIO bidirectional Ethernet management data input/output.
F1 GINT input LAN interrupt input from the LAN PHY (GPIO_AD).
J8 GRST output LAN reset output to the LAN PHY.
H4 SDA0 bidirectional I2C port 0 serial data input/output, interface to host (GPIO_AD), pull-up and Schmitt trigger in reset state.
J7 SCL0 output I2C port 0 serial clock output.
F9 SDA1 bidirectional I2C port 1 serial data input/output, interface to connect a PLL and an optional Secure Element (GPIO_AD).
H10 SCL1 output I2C port 1 serial clock output (GPIO).
H6 TA100RST output TA100 secure element reset (GPIO_CLK).
A4 DM bidirectional USB high speed data minus input/output.
B4 DP bidirectional USB high speed data plus input/output.
A3 VBG input Bias voltage reference for USB; refer to the USB 2.0 specification.
F2 VBUS power_in USB VBUS signal (GPIO_AD), input with pull-up and Schmitt trigger in reset state.
C8 SWO output Serial Wire Output (GPIO), output with pull-up in reset state.
G8 SWDIO bidirectional Serial Wire Debug input/output, input with Schmitt trigger in reset state.
E9 SWCLK input Serial Wire Debug clock input (GPIO).
G10 RST input Device reset input, input with pull-up in reset state.
K5 IDENTIFY output Toggles if the device identification feature is used (GPIO_AD), pull-up and Schmitt trigger in reset state.
G5 CFG input When detected high at reset, configuration image 0 is loaded, otherwise image 1 is loaded.
C5 VDDIO power_in I/O power supply.
F3 VDDIO power_in I/O power supply.
G7 VDDIO power_in I/O power supply.
C6 VDDCORE power_in Core power supply.
D6 VDDCORE power_in Core power supply.
G6 VDDCORE power_in Core power supply.
D7 VDDPLL power_in PLL power supply.
E5 VDDUTMII power_in USB UTMI I/O power supply.
B3 VDDUTMIC power_in USB UTMI core power supply.
E6 VDDPLLUSB power_in USB PLL power supply.
C3 VDDOUT power_in Power pin VDDOUT of the embedded voltage regulator, listed as Power.
C2 VDDIN power_in Power pin VDDIN of the embedded voltage regulator, listed as Power.
D1 VREFP power_in Positive reference power pin.
D3 VREFN power_in Negative reference, listed as Ground.
A8 GND power_in Ground.
C4 GND power_in Ground.
D4 GND power_in Ground.
E4 GND power_in Ground.
E7 GND power_in Ground.
F4 GND power_in Ground.
F5 GND power_in Ground.
F6 GND power_in Ground.
A7 NC unconnected Not connected.
A10 NC unconnected Not connected.
B1 NC unconnected Not connected.
B2 NC unconnected Not connected.
B10 NC unconnected Not connected.
B9 NC unconnected Not connected.
C9 NC unconnected Not connected.
D8 NC unconnected Not connected.
D9 NC unconnected Not connected.
D10 NC unconnected Not connected.
E8 NC unconnected Not connected.
E10 NC unconnected Not connected.
F7 NC unconnected Not connected.
F10 NC unconnected Not connected.
G9 NC unconnected Not connected.
H2 NC unconnected Not connected.
H3 NC unconnected Not connected.
H9 NC unconnected Not connected.
J2 NC unconnected Not connected, high impedance in reset state.
J9 NC unconnected Not connected.
J10 NC unconnected Not connected.
K2 NC unconnected Not connected, high impedance in reset state.
K4 NC unconnected Not connected.
K6 NC unconnected Not connected.
K7 NC unconnected Not connected.
K10 NC unconnected Not connected.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TFBGA-100(9x9)
Category Communication Interface Chip/UART/485/232
Pins 100

CAD (KiCad official)

  • Symbol: LAN9360C-I
  • Footprint: Package_BGA:TFBGA-100_9.0x9.0mm_Layout10x10_P0.8mm
  • 3D model: TFBGA-100(9x9) (KiCad packages3D, STEP)
  • 3D model files: lan9360c-i-etched.step / lan9360c-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lan9360c-i.step / lan9360c-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 02abf20a4ddc6116, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF