← Commit history

Initial commit: component/lan9220-abzj

Ray ·c060b0f4cf ·
2 files changed +531
README.mdadded+93
@@ -0,0 +1,93 @@+# LAN9220-ABZJ++**Microchip Tech** · Ethernet Controllers · QFN-56-EP(8x8)++LAN9220-ABZJ from Microchip Tech, in a QFN-56-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD33REG | power_in | +3.3V power supply for internal +1.8V regulator. |+| 2 | VDD18CORE | power_out | +1.8V from internal core regulator requiring external 0.01µF bypass and 4.7µF bulk capacitor. |+| 3 | GPIO0/nLED1 | bidirectional | General purpose I/O 0 or speed indicator LED driven low at 100Mb, high at 10Mb and during autonegotiation. |+| 4 | GPIO1/nLED2 | bidirectional | General purpose I/O 1 or link and activity indicator LED driven low for link, pulsed high 80ms for activity. |+| 5 | GPIO2/nLED3 | bidirectional | General purpose I/O 2 or full-duplex indicator LED driven low for full-duplex mode. |+| 6 | A7 | input | Address line 7 for CSR and FIFO selection. |+| 7 | A6 | input | Address line 6 for CSR and FIFO selection. |+| 8 | A5 | input | Address line 5 for CSR and FIFO selection. |+| 9 | A4 | input | Address line 4 for CSR and FIFO selection. |+| 10 | A3 | input | Address line 3 for CSR and FIFO selection. |+| 11 | A2 | input | Address line 2 for CSR and FIFO selection. |+| 12 | A1 | input | Address line 1 for CSR and FIFO selection. |+| 13 | FIFO_SEL | input | When driven high, all accesses route to RX or TX data FIFOs and upper address inputs A[7:3] are ignored. |+| 14 | TEST | input | Reserved for internal test purposes; must be grounded or pulled low when VDDVARIO < 3.0V. |+| 15 | nRD | input | Active low read strobe indicating a host read cycle. |+| 16 | nWR | input | Active low write strobe for write cycles and device wakeup from reduced power states. |+| 17 | nCS | input | Active low chip select qualifying read and write operations and device wakeup. |+| 18 | VDDVARIO | power_in | Variable voltage I/O logic power supply. |+| 19 | D15 | bidirectional | Host data bus bit 15 (bidirectional). |+| 20 | D14 | bidirectional | Host data bus bit 14 (bidirectional). |+| 21 | D13 | bidirectional | Host data bus bit 13 (bidirectional). |+| 22 | D12 | bidirectional | Host data bus bit 12 (bidirectional). |+| 23 | D11 | bidirectional | Host data bus bit 11 (bidirectional). |+| 24 | VDDVARIO | power_in | Variable voltage I/O logic power supply. |+| 25 | D10 | bidirectional | Host data bus bit 10 (bidirectional). |+| 26 | D9 | bidirectional | Host data bus bit 9 (bidirectional). |+| 27 | D8 | bidirectional | Host data bus bit 8 (bidirectional). |+| 28 | D7 | bidirectional | Host data bus bit 7 (bidirectional). |+| 29 | D6 | bidirectional | Host data bus bit 6 (bidirectional). |+| 30 | VDDVARIO | power_in | Variable voltage I/O logic power supply. |+| 31 | D5 | bidirectional | Host data bus bit 5 (bidirectional). |+| 32 | D4 | bidirectional | Host data bus bit 4 (bidirectional). |+| 33 | D3 | bidirectional | Host data bus bit 3 (bidirectional). |+| 34 | D2 | bidirectional | Host data bus bit 2 (bidirectional). |+| 35 | D1 | bidirectional | Host data bus bit 1 (bidirectional). |+| 36 | D0 | bidirectional | Host data bus bit 0 (bidirectional). |+| 37 | VDD18CORE | power_out | +1.8V from internal core regulator requiring external 0.01µF bypass and 4.7µF bulk capacitor connection. |+| 38 | EEDIO/GPO3 | bidirectional | EEPROM data I/O or general purpose output 3; bidirectional for EEPROM interface, output-only for GPIO mode. |+| 39 | EECS | output | Serial EEPROM chip select output. |+| 40 | EECLK/GPO4 | output | Serial EEPROM clock output or general purpose output 4 with internal pull-up; leave unconnected if EEPROM unused. |+| 41 | PME | output | Power management event indicator output asserted when wake event is detected. |+| 42 | nRESET | input | Active low reset input with weak internal pull-up resetting all logic and registers. |+| 43 | IRQ | output | Programmable interrupt request output with configurable polarity, source, and buffer type. |+| 44 | TPO- | bidirectional | Transmit pair negative output (normal) or receive pair negative input (reversed with Auto-MDIX). |+| 45 | TPO+ | bidirectional | Transmit pair positive output (normal) or receive pair positive input (reversed with Auto-MDIX). |+| 46 | VDD33A | power_in | +3.3V analog power supply. |+| 47 | TPI- | bidirectional | Receive pair negative input (normal) or transmit pair negative output (reversed with Auto-MDIX). |+| 48 | TPI+ | bidirectional | Receive pair positive input (normal) or transmit pair positive output (reversed with Auto-MDIX). |+| 49 | VDD33A | power_in | +3.3V analog power supply. |+| 50 | EXRES | input | PHY external bias resistor pin requiring connection to ground through 12.4kΩ ±1% resistor. |+| 51 | VDD33A | power_in | +3.3V analog power supply. |+| 52 | AMDIX_EN | input | Auto-MDIX enable input; pull high or leave unconnected to enable, pull low to disable Auto-MDIX. |+| 53 | VDD18A | power_in | +1.8V analog power supply requiring external connection to VDD18CORE. |+| 54 | XTAL2 | output | External 25MHz crystal oscillator output pin. |+| 55 | XTAL1/CLKIN | input | External 25MHz crystal oscillator input or single-ended TTL clock input with XTAL2 unconnected for clock mode. |+| 56 | VDDVARIO | power_in | Variable voltage I/O logic power supply. |+| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-56-EP(8x8) |+| Category | Interface |+| Pins | 57 |++## CAD (KiCad official)++- Symbol: `LAN9220-ABZJ`+- Footprint: `Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm`+- 3D model: QFN-56-EP(8x8) (KiCad packages3D, STEP)+- 3D model files: `lan9220-abzj-etched.step` / `lan9220-abzj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lan9220-abzj.step` / `lan9220-abzj.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926183362322432) (142 pp, sha256 `d1673f1d65fd57dd`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan9220-abzj-datasheet.pdf)
page.jsonadded+438
@@ -0,0 +1,438 @@+{+  "slug": "lan9220-abzj",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech Ethernet Controllers, QFN-56-EP(8x8). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lan9220-abzj",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lan9220-abzj.kicad_sym",+    "lan9220-abzj.kicad_mod",+    "lan9220-abzj.glb",+    "lan9220-abzj.step",+    "lan9220-abzj.lbr",+    "docs/hero.png",+    "docs/lan9220-abzj-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LAN9220-ABZJ",+    "manufacturer": "Microchip Tech",+    "package": "QFN-56-EP(8x8)",+    "pin_count": 57,+    "category": "Interface",+    "subcategory": "Ethernet Controllers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926183362322432",+    "parts": {+      "symbol": "lan9220-abzj.kicad_sym",+      "footprint": "lan9220-abzj.kicad_mod",+      "model_3d": "lan9220-abzj-etched.glb",+      "model_3d_plain": "lan9220-abzj.glb",+      "model_3d_step": "lan9220-abzj-etched.step",+      "model_3d_step_plain": "lan9220-abzj.step",+      "lbr": "lan9220-abzj.lbr"+    },+    "distributor_links": {+      "lcsc": "C1521597"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD33REG",+        "type": "power_in",+        "description": "+3.3V power supply for internal +1.8V regulator."+      },+      {+        "number": "2",+        "name": "VDD18CORE",+        "type": "power_out",+        "description": "+1.8V from internal core regulator requiring external 0.01µF bypass and 4.7µF bulk capacitor."+      },+      {+        "number": "3",+        "name": "GPIO0/nLED1",+        "type": "bidirectional",+        "description": "General purpose I/O 0 or speed indicator LED driven low at 100Mb, high at 10Mb and during autonegotiation."+      },+      {+        "number": "4",+        "name": "GPIO1/nLED2",+        "type": "bidirectional",+        "description": "General purpose I/O 1 or link and activity indicator LED driven low for link, pulsed high 80ms for activity."+      },+      {+        "number": "5",+        "name": "GPIO2/nLED3",+        "type": "bidirectional",+        "description": "General purpose I/O 2 or full-duplex indicator LED driven low for full-duplex mode."+      },+      {+        "number": "6",+        "name": "A7",+        "type": "input",+        "description": "Address line 7 for CSR and FIFO selection."+      },+      {+        "number": "7",+        "name": "A6",+        "type": "input",+        "description": "Address line 6 for CSR and FIFO selection."+      },+      {+        "number": "8",+        "name": "A5",+        "type": "input",+        "description": "Address line 5 for CSR and FIFO selection."+      },+      {+        "number": "9",+        "name": "A4",+        "type": "input",+        "description": "Address line 4 for CSR and FIFO selection."+      },+      {+        "number": "10",+        "name": "A3",+        "type": "input",+        "description": "Address line 3 for CSR and FIFO selection."+      },+      {+        "number": "11",+        "name": "A2",+        "type": "input",+        "description": "Address line 2 for CSR and FIFO selection."+      },+      {+        "number": "12",+        "name": "A1",+        "type": "input",+        "description": "Address line 1 for CSR and FIFO selection."+      },+      {+        "number": "13",+        "name": "FIFO_SEL",+        "type": "input",+        "description": "When driven high, all accesses route to RX or TX data FIFOs and upper address inputs A[7:3] are ignored."+      },+      {+        "number": "14",+        "name": "TEST",+        "type": "input",+        "description": "Reserved for internal test purposes; must be grounded or pulled low when VDDVARIO < 3.0V."+      },+      {+        "number": "15",+        "name": "nRD",+        "type": "input",+        "description": "Active low read strobe indicating a host read cycle."+      },+      {+        "number": "16",+        "name": "nWR",+        "type": "input",+        "description": "Active low write strobe for write cycles and device wakeup from reduced power states."+      },+      {+        "number": "17",+        "name": "nCS",+        "type": "input",+        "description": "Active low chip select qualifying read and write operations and device wakeup."+      },+      {+        "number": "18",+        "name": "VDDVARIO",+        "type": "power_in",+        "description": "Variable voltage I/O logic power supply."+      },+      {+        "number": "19",+        "name": "D15",+        "type": "bidirectional",+        "description": "Host data bus bit 15 (bidirectional)."+      },+      {+        "number": "20",+        "name": "D14",+        "type": "bidirectional",+        "description": "Host data bus bit 14 (bidirectional)."+      },+      {+        "number": "21",+        "name": "D13",+        "type": "bidirectional",+        "description": "Host data bus bit 13 (bidirectional)."+      },+      {+        "number": "22",+        "name": "D12",+        "type": "bidirectional",+        "description": "Host data bus bit 12 (bidirectional)."+      },+      {+        "number": "23",+        "name": "D11",+        "type": "bidirectional",+        "description": "Host data bus bit 11 (bidirectional)."+      },+      {+        "number": "24",+        "name": "VDDVARIO",+        "type": "power_in",+        "description": "Variable voltage I/O logic power supply."+      },+      {+        "number": "25",+        "name": "D10",+        "type": "bidirectional",+        "description": "Host data bus bit 10 (bidirectional)."+      },+      {+        "number": "26",+        "name": "D9",+        "type": "bidirectional",+        "description": "Host data bus bit 9 (bidirectional)."+      },+      {+        "number": "27",+        "name": "D8",+        "type": "bidirectional",+        "description": "Host data bus bit 8 (bidirectional)."+      },+      {+        "number": "28",+        "name": "D7",+        "type": "bidirectional",+        "description": "Host data bus bit 7 (bidirectional)."+      },+      {+        "number": "29",+        "name": "D6",+        "type": "bidirectional",+        "description": "Host data bus bit 6 (bidirectional)."+      },+      {+        "number": "30",+        "name": "VDDVARIO",+        "type": "power_in",+        "description": "Variable voltage I/O logic power supply."+      },+      {+        "number": "31",+        "name": "D5",+        "type": "bidirectional",+        "description": "Host data bus bit 5 (bidirectional)."+      },+      {+        "number": "32",+        "name": "D4",+        "type": "bidirectional",+        "description": "Host data bus bit 4 (bidirectional)."+      },+      {+        "number": "33",+        "name": "D3",+        "type": "bidirectional",+        "description": "Host data bus bit 3 (bidirectional)."+      },+      {+        "number": "34",+        "name": "D2",+        "type": "bidirectional",+        "description": "Host data bus bit 2 (bidirectional)."+      },+      {+        "number": "35",+        "name": "D1",+        "type": "bidirectional",+        "description": "Host data bus bit 1 (bidirectional)."+      },+      {+        "number": "36",+        "name": "D0",+        "type": "bidirectional",+        "description": "Host data bus bit 0 (bidirectional)."+      },+      {+        "number": "37",+        "name": "VDD18CORE",+        "type": "power_out",+        "description": "+1.8V from internal core regulator requiring external 0.01µF bypass and 4.7µF bulk capacitor connection."+      },+      {+        "number": "38",+        "name": "EEDIO/GPO3",+        "type": "bidirectional",+        "description": "EEPROM data I/O or general purpose output 3; bidirectional for EEPROM interface, output-only for GPIO mode."+      },+      {+        "number": "39",+        "name": "EECS",+        "type": "output",+        "description": "Serial EEPROM chip select output."+      },+      {+        "number": "40",+        "name": "EECLK/GPO4",+        "type": "output",+        "description": "Serial EEPROM clock output or general purpose output 4 with internal pull-up; leave unconnected if EEPROM unused."+      },+      {+        "number": "41",+        "name": "PME",+        "type": "output",+        "description": "Power management event indicator output asserted when wake event is detected."+      },+      {+        "number": "42",+        "name": "nRESET",+        "type": "input",+        "description": "Active low reset input with weak internal pull-up resetting all logic and registers."+      },+      {+        "number": "43",+        "name": "IRQ",+        "type": "output",+        "description": "Programmable interrupt request output with configurable polarity, source, and buffer type."+      },+      {+        "number": "44",+        "name": "TPO-",+        "type": "bidirectional",+        "description": "Transmit pair negative output (normal) or receive pair negative input (reversed with Auto-MDIX)."+      },+      {+        "number": "45",+        "name": "TPO+",+        "type": "bidirectional",+        "description": "Transmit pair positive output (normal) or receive pair positive input (reversed with Auto-MDIX)."+      },+      {+        "number": "46",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "47",+        "name": "TPI-",+        "type": "bidirectional",+        "description": "Receive pair negative input (normal) or transmit pair negative output (reversed with Auto-MDIX)."+      },+      {+        "number": "48",+        "name": "TPI+",+        "type": "bidirectional",+        "description": "Receive pair positive input (normal) or transmit pair positive output (reversed with Auto-MDIX)."+      },+      {+        "number": "49",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "50",+        "name": "EXRES",+        "type": "input",+        "description": "PHY external bias resistor pin requiring connection to ground through 12.4kΩ ±1% resistor."+      },+      {+        "number": "51",+        "name": "VDD33A",+        "type": "power_in",+        "description": "+3.3V analog power supply."+      },+      {+        "number": "52",+        "name": "AMDIX_EN",+        "type": "input",+        "description": "Auto-MDIX enable input; pull high or leave unconnected to enable, pull low to disable Auto-MDIX."+      },+      {+        "number": "53",+        "name": "VDD18A",+        "type": "power_in",+        "description": "+1.8V analog power supply requiring external connection to VDD18CORE."+      },+      {+        "number": "54",+        "name": "XTAL2",+        "type": "output",+        "description": "External 25MHz crystal oscillator output pin."+      },+      {+        "number": "55",+        "name": "XTAL1/CLKIN",+        "type": "input",+        "description": "External 25MHz crystal oscillator input or single-ended TTL clock input with XTAL2 unconnected for clock mode."+      },+      {+        "number": "56",+        "name": "VDDVARIO",+        "type": "power_in",+        "description": "Variable voltage I/O logic power supply."+      },+      {+        "number": "57",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 57 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 26,+        "cost_usd": 0.696,+        "at": "2026-09-18T00:01:15"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926183362322432",+        "pages": 142,+        "sha256": "d1673f1d65fd57dd",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 57,+        "described": 57,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file