← Commit history

Initial commit: component/lan8720a-cp-tr-abc

Ray ·62abbd6d0e ·
2 files changed +101
README.mdadded+67
@@ -0,0 +1,67 @@+# LAN8720A-CP-TR-ABC++**Microchip Tech** · Ethernet Transceivers · QFN-24-EP(4x4)++LAN8720A-CP-TR-ABC from Microchip Tech, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD2A | power_in | +3.3V analog port power to Channel 2 and the internal regulator. |+| 2 | LED2/nINTSEL | bidirectional | Link Speed LED output (active when 100Mbps). Also serves as the nINTSEL configuration strap latched at reset: pulled to VDD2A selects nINT on pin 14 (default); pulled to VSS selects REFCLKO on pin 14. Buffer: O12 output / IS(PU) strap. |+| 3 | LED1/REGOFF | bidirectional | Link Activity LED output (blinks on activity). Also serves as REGOFF configuration strap latched at reset: pulled high to VDD2A disables internal 1.2V regulator (external 1.2V must be supplied to VDDCR); floating/pulled low enables it (default). Buffer: O12 output / IS(PD) strap. |+| 4 | XTAL2 | output | External crystal output. Leave unconnected when using a single-ended clock oscillator on XTAL1/CLKIN. Buffer type OCLK. |+| 5 | XTAL1/CLKIN | input | External 25 MHz crystal input (XTAL1) or single-ended clock oscillator input (CLKIN). Buffer type ICLK. |+| 6 | VDDCR | power_in | +1.2V digital core power supply. Supplied by the on-chip regulator unless configured for regulator-off mode via the REGOFF strap. Use 1 uF and 470 pF decoupling capacitors in parallel to ground. |+| 7 | RXD1/MODE1 | bidirectional | RMII Receive Data bit 1 output to the MAC (VO8). Also serves as MODE1 configuration strap (VIS/PU) latched at reset; combined with MODE0 and MODE2 to set the default PHY operating mode. |+| 8 | RXD0/MODE0 | bidirectional | RMII Receive Data bit 0 output to the MAC (VO8). Also serves as MODE0 configuration strap (VIS/PU) latched at reset; combined with MODE1 and MODE2 to set the default PHY operating mode. |+| 9 | VDDIO | power_in | +1.6V to +3.6V variable I/O power supply for the digital interface pins. |+| 10 | RXER/PHYAD0 | bidirectional | RMII Receive Error output (VO8), asserted when an error is detected in the received frame. Also serves as PHYAD0 configuration strap (VIS/PD) that sets the SMI PHY address at reset. |+| 11 | CRS_DV/MODE2 | bidirectional | Carrier Sense / Receive Data Valid output to the MAC (VO8). Also serves as MODE2 configuration strap (VIS/PU) latched at reset; combined with MODE0 and MODE1 to set the default PHY operating mode. |+| 12 | MDIO | bidirectional | Serial Management Interface (SMI/MIIM) data input/output. Buffer type VIS/VOD8 (open-drain output requires external pull-up to VDDIO). |+| 13 | MDC | input | Serial Management Interface (SMI/MIIM) clock input from the MAC. Buffer type VIS. |+| 14 | nINT/REFCLKO | output | Configurable function: active-low interrupt output (VOD8, open-drain, needs external pull-up to VDDIO) or 50 MHz REFCLKO reference clock output (VO8, derived from 25 MHz crystal). Function is selected by the nINTSEL configuration strap on pin 2. |+| 15 | nRST | input | Active-low system reset input. Buffer type VIS(PU). |+| 16 | TXEN | input | RMII Transmit Enable input from the MAC; indicates that valid transmit data is present on TXD[1:0]. Buffer type VIS(PD). |+| 17 | TXD0 | input | RMII Transmit Data bit 0 input from the MAC. Buffer type VIS. |+| 18 | TXD1 | input | RMII Transmit Data bit 1 input from the MAC. Buffer type VIS. |+| 19 | VDD1A | power_in | +3.3V analog port power to Channel 1. |+| 20 | TXN | bidirectional | Ethernet TX/RX Negative Channel 1 (AIO). Connects to the magnetics/transformer MDI interface. |+| 21 | TXP | bidirectional | Ethernet TX/RX Positive Channel 1 (AIO). Connects to the magnetics/transformer MDI interface. |+| 22 | RXN | bidirectional | Ethernet TX/RX Negative Channel 2 (AIO). Connects to the magnetics/transformer MDI interface. |+| 23 | RXP | bidirectional | Ethernet TX/RX Positive Channel 2 (AIO). Connects to the magnetics/transformer MDI interface. |+| 24 | RBIAS | passive | External 1% bias resistor input. Requires a 12.1 kOhm (1%) resistor to ground; nominal pin voltage 1.2 V, dissipates ~1 mW. |+| EP | VSS | power_in | Exposed thermal pad on the bottom of the package; common ground. Must be connected to the ground plane with a via array. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-24-EP(4x4) |+| Category | Interface |+| Pins | 25 |++## Ordering variants++Same part, different packaging or reel option.++- `LAN8720A-CP-TR-ABC`+- `LAN8720A-CP-TR-ABCCP-ABC`++## CAD (KiCad official)++- Symbol: `LAN8720A-CP-TR-ABC`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893678148050944) (78 pp, sha256 `a066b5c955ab5b43`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan8720a-cp-tr-abc-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lan8720a-cp-tr-abc",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech Ethernet Transceivers, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "lan8720a-cp-tr-abc"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lan8720a-cp-tr-abc.kicad_sym",+    "lan8720a-cp-tr-abc.kicad_mod",+    "lan8720a-cp-tr-abc.glb",+    "lan8720a-cp-tr-abc.step",+    "lan8720a-cp-tr-abc.lbr",+    "docs/hero.png",+    "docs/lan8720a-cp-tr-abc-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file