← Commit history
README.mdadded+78@@ -0,0 +1,78 @@+# LAN8710A-EZK-TR++**Microchip Tech** · Ethernet Transceivers · QFN-32-EP(5x5)++LAN8710A-EZK-TR from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD2A | power_in | +3.3V analog port power for Channel 2 and the internal 1.2V regulator. Decouple to VSS per reference schematic. |+| 2 | LED2/nINTSEL | bidirectional | LED2 output (O12, active when 100 Mbps link speed). Doubles as the nINTSEL configuration strap latched at reset: floated/pulled to VDD2A selects nINT; pulled low to VSS selects TXER/TXD4 on pin 18. |+| 3 | LED1/REGOFF | bidirectional | LED1 output (O12, driven active on valid link, blinks on activity). Doubles as REGOFF configuration strap: pulled high to VDD2A via external resistor disables the internal 1.2V regulator (external 1.2V must be supplied to VDDCR); floated/low = internal regulator enabled. |+| 4 | XTAL2 | output | 25 MHz crystal oscillator output (OCLK). Leave unconnected when driving XTAL1/CLKIN with a single-ended clock oscillator. |+| 5 | XTAL1/CLKIN | input | 25 MHz crystal input (ICLK) or single-ended clock oscillator input. In RMII mode this pin is also the REF_CLK reference. |+| 6 | VDDCR | power_in | +1.2V digital core power. Supplied by the on-chip regulator by default, or from an external 1.2V rail when REGOFF is asserted. Bypass with 1 µF and 470 pF in parallel to VSS. |+| 7 | RXCLK/PHYAD1 | bidirectional | MII receive clock output (VO8): 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. At reset acts as PHYAD1 configuration strap (VIS, internal PD) combining with PHYAD0/PHYAD2 to set the SMI address. |+| 8 | RXD3/PHYAD2 | bidirectional | MII receive data bit 3 (VO8). Unused in RMII mode. At reset acts as PHYAD2 configuration strap (VIS, PD) contributing to the SMI PHY address. |+| 9 | RXD2/RMIISEL | bidirectional | MII receive data bit 2 (VO8). Unused in RMII mode. At reset acts as RMIISEL configuration strap (VIS, PD): low to VSS selects MII, high to VDDIO selects RMII. |+| 10 | RXD1/MODE1 | bidirectional | MII/RMII receive data bit 1 (VO8). Also acts as MODE1 configuration strap (VIS, PU) combining with MODE0/MODE2 to set the default PHY operating mode (auto-neg / speed / duplex). |+| 11 | RXD0/MODE0 | bidirectional | MII/RMII receive data bit 0 (VO8). Also acts as MODE0 configuration strap (VIS, PU) combining with MODE1/MODE2 to set the default PHY operating mode. |+| 12 | VDDIO | power_in | Variable I/O power supply, +1.6V to +3.6V. Sets the digital I/O voltage level for all VIS/VO8 buffers. |+| 13 | RXER/RXD4/PHYAD0 | bidirectional | MII receive error output (VO8, default) or MII RXD4 in 5B-symbol interface mode. At reset acts as PHYAD0 configuration strap (VIS, PD) contributing to the SMI PHY address. Optional in RMII mode. |+| 14 | CRS | output | MII Carrier Sense output (VO8, internal PD). Asserted to indicate carrier detection in MII mode. |+| 15 | COL/CRS_DV/MODE2 | bidirectional | MII collision detect (COL, VO8) or RMII Carrier Sense / Receive Data Valid (CRS_DV). At reset acts as MODE2 configuration strap (VIS, PU) combining with MODE0/MODE1 to set the default PHY mode. |+| 16 | MDIO | bidirectional | Serial Management Interface (SMI/MDIO) data input/output (VIS/VOD8, open-drain). Requires external pull-up to VDDIO. |+| 17 | MDC | input | Serial Management Interface (SMI) clock input (VIS). Driven by the MAC/host to clock MDIO transactions. |+| 18 | nINT/TXER/TXD4 | bidirectional | Active-low interrupt output (VO8) by default; can be reconfigured via the nINTSEL strap (pin 2) to serve as MII Transmit Error (TXER, VIS+PU) or Symbol Interface TXD4. Requires external pull-up to VDDIO when used as nINT. |+| 19 | nRST | input | Active-low external system reset input (VIS, internal PU). Drives configuration-strap latch on rising edge. |+| 20 | TXCLK | output | MII transmit clock output (VO8). 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. Not used in RMII mode. |+| 21 | TXEN | input | MII/RMII transmit enable input (VIS, internal PD). Asserted by the MAC to indicate valid transmit data on TXD. |+| 22 | TXD0 | input | MII/RMII transmit data bit 0 (VIS). Driven by the MAC to send transmit data to the PHY. |+| 23 | TXD1 | input | MII/RMII transmit data bit 1 (VIS). Driven by the MAC to send transmit data to the PHY. |+| 24 | TXD2 | input | MII transmit data bit 2 (VIS). Used in MII mode only; must be tied to ground in RMII mode. |+| 25 | TXD3 | input | MII transmit data bit 3 (VIS). Used in MII mode only; must be tied to ground in RMII mode. |+| 26 | RXDV | output | MII Receive Data Valid output (VO8). Asserted when recovered and decoded data is available on the RXD lines. |+| 27 | VDD1A | power_in | +3.3V analog port power for Channel 1 (TXP/TXN/RXP/RXN reference). |+| 28 | TXN | bidirectional | Ethernet twisted-pair transmit/receive negative, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer. |+| 29 | TXP | bidirectional | Ethernet twisted-pair transmit/receive positive, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer. |+| 30 | RXN | bidirectional | Ethernet twisted-pair transmit/receive negative, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXN). |+| 31 | RXP | bidirectional | Ethernet twisted-pair transmit/receive positive, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXP). |+| 32 | RBIAS | passive | External 1% bias resistor connection. Requires a 12.1 kΩ (1%) resistor to VSS; nominal pin voltage 1.2V, dissipating ~1 mW. |+| 33 | VSS | power_in | Exposed thermal pad on the bottom of the package. Must be connected to the PCB ground plane via a via array; serves as the device common ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | QFN-32-EP(5x5) |+| Category | Interface |+| Pins | 33 |++## Ordering variants++Same part, different packaging or reel option.++- `LAN8710A-EZK-TR`+- `LAN8710A-EZK-TREZC`+- `LAN8710A-EZK-TREZC-TR`+- `LAN8710A-EZK-ABC`+- `LAN8710A-EZK-TREZC-ABC`++## CAD (KiCad official)++- Symbol: `LAN8710A-EZK-TR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920577403207680) (None pp, sha256 `0f4b8670bcfc7e63`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lan8710a-ezk-tr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lan8710a-ezk-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Ethernet Transceivers, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "lan8710a-ezk-tr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lan8710a-ezk-tr.kicad_sym",+ "lan8710a-ezk-tr.kicad_mod",+ "lan8710a-ezk-tr.glb",+ "lan8710a-ezk-tr.step",+ "lan8710a-ezk-tr.lbr",+ "docs/hero.png",+ "docs/lan8710a-ezk-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}