← Commit history
page.json+288−8@@ -1,13 +1,298 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lan8710a-ezk-tr",+ "title": "LAN8710A-EZK-TR",+ "brief": "Microchip Tech Ethernet Transceivers, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Microchip Tech Ethernet Transceivers, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "interface", "lan8710a-ezk-tr" ],+ "component": {+ "mpn": "LAN8710A-EZK-TR",+ "manufacturer": "Microchip Tech",+ "package": "QFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Interface",+ "subcategory": "Ethernet Transceivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920577403207680",+ "parts": {+ "symbol": "lan8710a-ezk-tr.kicad_sym",+ "footprint": "lan8710a-ezk-tr.kicad_mod",+ "model_3d": "lan8710a-ezk-tr.glb",+ "model_3d_step": "lan8710a-ezk-tr.step",+ "lbr": "lan8710a-ezk-tr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VDD2A",+ "type": "power_in",+ "description": "+3.3V analog port power for Channel 2 and the internal 1.2V regulator. Decouple to VSS per reference schematic."+ },+ {+ "number": "2",+ "name": "LED2/nINTSEL",+ "type": "bidirectional",+ "description": "LED2 output (O12, active when 100 Mbps link speed). Doubles as the nINTSEL configuration strap latched at reset: floated/pulled to VDD2A selects nINT; pulled low to VSS selects TXER/TXD4 on pin 18."+ },+ {+ "number": "3",+ "name": "LED1/REGOFF",+ "type": "bidirectional",+ "description": "LED1 output (O12, driven active on valid link, blinks on activity). Doubles as REGOFF configuration strap: pulled high to VDD2A via external resistor disables the internal 1.2V regulator (external 1.2V must be supplied to VDDCR); floated/low = internal regulator enabled."+ },+ {+ "number": "4",+ "name": "XTAL2",+ "type": "output",+ "description": "25 MHz crystal oscillator output (OCLK). Leave unconnected when driving XTAL1/CLKIN with a single-ended clock oscillator."+ },+ {+ "number": "5",+ "name": "XTAL1/CLKIN",+ "type": "input",+ "description": "25 MHz crystal input (ICLK) or single-ended clock oscillator input. In RMII mode this pin is also the REF_CLK reference."+ },+ {+ "number": "6",+ "name": "VDDCR",+ "type": "power_in",+ "description": "+1.2V digital core power. Supplied by the on-chip regulator by default, or from an external 1.2V rail when REGOFF is asserted. Bypass with 1 \u00b5F and 470 pF in parallel to VSS."+ },+ {+ "number": "7",+ "name": "RXCLK/PHYAD1",+ "type": "bidirectional",+ "description": "MII receive clock output (VO8): 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. At reset acts as PHYAD1 configuration strap (VIS, internal PD) combining with PHYAD0/PHYAD2 to set the SMI address."+ },+ {+ "number": "8",+ "name": "RXD3/PHYAD2",+ "type": "bidirectional",+ "description": "MII receive data bit 3 (VO8). Unused in RMII mode. At reset acts as PHYAD2 configuration strap (VIS, PD) contributing to the SMI PHY address."+ },+ {+ "number": "9",+ "name": "RXD2/RMIISEL",+ "type": "bidirectional",+ "description": "MII receive data bit 2 (VO8). Unused in RMII mode. At reset acts as RMIISEL configuration strap (VIS, PD): low to VSS selects MII, high to VDDIO selects RMII."+ },+ {+ "number": "10",+ "name": "RXD1/MODE1",+ "type": "bidirectional",+ "description": "MII/RMII receive data bit 1 (VO8). Also acts as MODE1 configuration strap (VIS, PU) combining with MODE0/MODE2 to set the default PHY operating mode (auto-neg / speed / duplex)."+ },+ {+ "number": "11",+ "name": "RXD0/MODE0",+ "type": "bidirectional",+ "description": "MII/RMII receive data bit 0 (VO8). Also acts as MODE0 configuration strap (VIS, PU) combining with MODE1/MODE2 to set the default PHY operating mode."+ },+ {+ "number": "12",+ "name": "VDDIO",+ "type": "power_in",+ "description": "Variable I/O power supply, +1.6V to +3.6V. Sets the digital I/O voltage level for all VIS/VO8 buffers."+ },+ {+ "number": "13",+ "name": "RXER/RXD4/PHYAD0",+ "type": "bidirectional",+ "description": "MII receive error output (VO8, default) or MII RXD4 in 5B-symbol interface mode. At reset acts as PHYAD0 configuration strap (VIS, PD) contributing to the SMI PHY address. Optional in RMII mode."+ },+ {+ "number": "14",+ "name": "CRS",+ "type": "output",+ "description": "MII Carrier Sense output (VO8, internal PD). Asserted to indicate carrier detection in MII mode."+ },+ {+ "number": "15",+ "name": "COL/CRS_DV/MODE2",+ "type": "bidirectional",+ "description": "MII collision detect (COL, VO8) or RMII Carrier Sense / Receive Data Valid (CRS_DV). At reset acts as MODE2 configuration strap (VIS, PU) combining with MODE0/MODE1 to set the default PHY mode."+ },+ {+ "number": "16",+ "name": "MDIO",+ "type": "bidirectional",+ "description": "Serial Management Interface (SMI/MDIO) data input/output (VIS/VOD8, open-drain). Requires external pull-up to VDDIO."+ },+ {+ "number": "17",+ "name": "MDC",+ "type": "input",+ "description": "Serial Management Interface (SMI) clock input (VIS). Driven by the MAC/host to clock MDIO transactions."+ },+ {+ "number": "18",+ "name": "nINT/TXER/TXD4",+ "type": "bidirectional",+ "description": "Active-low interrupt output (VO8) by default; can be reconfigured via the nINTSEL strap (pin 2) to serve as MII Transmit Error (TXER, VIS+PU) or Symbol Interface TXD4. Requires external pull-up to VDDIO when used as nINT."+ },+ {+ "number": "19",+ "name": "nRST",+ "type": "input",+ "description": "Active-low external system reset input (VIS, internal PU). Drives configuration-strap latch on rising edge."+ },+ {+ "number": "20",+ "name": "TXCLK",+ "type": "output",+ "description": "MII transmit clock output (VO8). 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. Not used in RMII mode."+ },+ {+ "number": "21",+ "name": "TXEN",+ "type": "input",+ "description": "MII/RMII transmit enable input (VIS, internal PD). Asserted by the MAC to indicate valid transmit data on TXD."+ },+ {+ "number": "22",+ "name": "TXD0",+ "type": "input",+ "description": "MII/RMII transmit data bit 0 (VIS). Driven by the MAC to send transmit data to the PHY."+ },+ {+ "number": "23",+ "name": "TXD1",+ "type": "input",+ "description": "MII/RMII transmit data bit 1 (VIS). Driven by the MAC to send transmit data to the PHY."+ },+ {+ "number": "24",+ "name": "TXD2",+ "type": "input",+ "description": "MII transmit data bit 2 (VIS). Used in MII mode only; must be tied to ground in RMII mode."+ },+ {+ "number": "25",+ "name": "TXD3",+ "type": "input",+ "description": "MII transmit data bit 3 (VIS). Used in MII mode only; must be tied to ground in RMII mode."+ },+ {+ "number": "26",+ "name": "RXDV",+ "type": "output",+ "description": "MII Receive Data Valid output (VO8). Asserted when recovered and decoded data is available on the RXD lines."+ },+ {+ "number": "27",+ "name": "VDD1A",+ "type": "power_in",+ "description": "+3.3V analog port power for Channel 1 (TXP/TXN/RXP/RXN reference)."+ },+ {+ "number": "28",+ "name": "TXN",+ "type": "bidirectional",+ "description": "Ethernet twisted-pair transmit/receive negative, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer."+ },+ {+ "number": "29",+ "name": "TXP",+ "type": "bidirectional",+ "description": "Ethernet twisted-pair transmit/receive positive, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer."+ },+ {+ "number": "30",+ "name": "RXN",+ "type": "bidirectional",+ "description": "Ethernet twisted-pair transmit/receive negative, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXN)."+ },+ {+ "number": "31",+ "name": "RXP",+ "type": "bidirectional",+ "description": "Ethernet twisted-pair transmit/receive positive, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXP)."+ },+ {+ "number": "32",+ "name": "RBIAS",+ "type": "passive",+ "description": "External 1% bias resistor connection. Requires a 12.1 k\u03a9 (1%) resistor to VSS; nominal pin voltage 1.2V, dissipating ~1 mW."+ },+ {+ "number": "33",+ "name": "VSS",+ "type": "power_in",+ "description": "Exposed thermal pad on the bottom of the package. Must be connected to the PCB ground plane via a via array; serves as the device common ground."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920577403207680",+ "pages": null,+ "sha256": "0f4b8670bcfc7e63",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip Tech",+ "Package": "QFN-32-EP(5x5)",+ "Category": "Interface",+ "Pins": "33"+ }+ },+ "variants": [+ {+ "mpn": "LAN8710A-EZK-TR",+ "kind": "packaging"+ },+ {+ "mpn": "LAN8710A-EZK-TREZC",+ "kind": "packaging"+ },+ {+ "mpn": "LAN8710A-EZK-TREZC-TR",+ "kind": "packaging"+ },+ {+ "mpn": "LAN8710A-EZK-ABC",+ "kind": "unknown"+ },+ {+ "mpn": "LAN8710A-EZK-TREZC-ABC",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lan8710a-ezk-tr"+ ],+ "discovery_pitch": "LAN8710A-EZK-TR (Microchip Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +310,5 @@ "docs/lan8710a-ezk-tr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }