by adom
Microchip LAN7800 — single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller with integrated USB device controller + PHY, Ethernet MAC, and Gigabit PHY. QFN-48 in 7x7 mm (Y9X) and 6x6 mm (VSX).
← Commit history
variants manifest: step values are now package-named (QFN-48_7x7mm[-HV|-SB].step) so the Fusion bridge pairs them; old names kept as stepAliases
1 file changed
+20−7
lan7800-qfn48-7x7-y9x.variants.json+20−7@@ -10,15 +10,19 @@ "device": "baseline", "kicad_mod": "lan7800-qfn48-7x7-y9x.kicad_mod", "footprintName": "QFN-48 7x7mm",- "step": "LAN7800.step",- "changed": "nothing; the page footprint as-is (49 SMD pads)"+ "step": "QFN-48_7x7mm.step",+ "changed": "nothing; the page footprint as-is (49 SMD pads)",+ "stepAliases": [+ "LAN7800.step",+ "LAN7800.step"+ ] }, { "suffix": "-HV", "device": "heatsink vias", "kicad_mod": "lan7800-qfn48-7x7-y9x-HV.kicad_mod", "footprintName": "QFN-48 7x7mm-HV",- "step": "LAN7800.heatsink-vias.step",+ "step": "QFN-48_7x7mm-HV.step", "changed": "+16 thru_hole pads under pad 49 (1.2 mm pitch, 0.3 mm drill, 0.6 mm OD, 0.45 mm inset), on copper + mask layers only (*.Cu *.Mask); nothing on a drawing layer", "viaPadNumber": "49", "viaPadNumberNote": "KiCad: pads sharing a number share the net, so the vias are on the EP net with no symbol change and DRC is clean. EAGLE needs unique pad names: adom-lbr should emit them as [email protected]@16 (EAGLE's own multi-pad convention) and connect all 17 to the EP pin.",@@ -96,14 +100,18 @@ "ringWidth": 0.15 }, "pitch": 1.2,- "insetFromPadEdge": 0.44999999999999996+ "insetFromPadEdge": 0.44999999999999996,+ "stepAliases": [+ "LAN7800.heatsink-vias.step",+ "LAN7800-HV.step"+ ] }, { "suffix": "-SB", "device": "solder balls", "kicad_mod": "lan7800-qfn48-7x7-y9x-SB.kicad_mod", "footprintName": "QFN-48 7x7mm-SB",- "step": "LAN7800.solder-balls.step",+ "step": "QFN-48_7x7mm-SB.step", "changed": "+296 filled fp_circle \u00d80.30 mm on KiCad layer User.9 (Adom.SolderBalls), one per 300um jet-paste ball at 0.25 mm pitch; copper unchanged", "ballLayer": { "kicad": "User.9",@@ -119,11 +127,16 @@ "shape": "hemisphere, flat face on the pad" }, "count": 296,- "ballsJson": "lan7800-qfn48-7x7-y9x-SB.solder-balls.json"+ "ballsJson": "lan7800-qfn48-7x7-y9x-SB.solder-balls.json",+ "stepAliases": [+ "LAN7800.solder-balls.step",+ "LAN7800-SB.step"+ ] } ], "notes": [ "-SB carries no vias, but its balls still keep 0.55 mm clear of the STANDARD via positions (the keep-out is derived from the exposed-pad geometry, not from vias present in the file), so -SB and the layered file both have 296 balls and a board can gain the vias later without moving paste. The vias+balls combination is lan7800-qfn48-7x7-y9x.layers.kicad_mod if a fourth device is ever wanted.", "Re-running `adom-footprint heatsink` / `solderballs` on a variant is idempotent."- ]+ ],+ "stepPairing": "Fusion bridge binds a STEP to a PACKAGE by name: stem == package name (case-insensitive after normalisation, spaces -> _), then deviceset+device (LAN7800-HV), then deviceset. Use `step`; `stepAliases` are the older descriptive names and do not pair on their own." }