by adom
Microchip LAN7800 — single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller with integrated USB device controller + PHY, Ethernet MAC, and Gigabit PHY. QFN-48 in 7x7 mm (Y9X) and 6x6 mm (VSX).
← Commit history
README.md+34−32@@ -1,24 +1,26 @@ # LAN7800 — SuperSpeed USB 3.1 to Gigabit Ethernet Controller -The Microchip **LAN7800** is a single-chip **SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet** bridge controller. It integrates a USB 3.1 Gen 1 device controller and PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX into a single 48-pin QFN — a complete USB-to-Ethernet solution for docking stations, dongles, notebooks, set-top boxes and embedded systems. It is configured entirely through on-chip OTP memory (no external EEPROM) and ships with drivers for Windows, Linux, macOS, uBoot, UEFI, PXE and FreeBSD.+The Microchip **LAN7800** is a single-chip **SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet** bridge controller. It folds a USB 3.1 Gen 1 device controller and PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX into a single 48-pin QFN — a complete USB-to-Ethernet solution for docking stations, dongles, notebooks, set-top boxes and embedded systems. -The interactive **symbol** and **footprint** viewers above are rendered by the wiki from the CAD shipped with this page. Use the toggle at the **top-right of the footprint viewer** to switch between the **QFN 7×7 mm (Y9X)** and **QFN 6×6 mm (VSX)** packages. Pin 1 is the square pad.+ -## Specifications+> 💡 **Viewers above** — the interactive **symbol** and **footprint** are rendered by the wiki from the CAD on this page. Use the toggle at the **top-right of the footprint viewer** to switch between **QFN 7×7 mm (Y9X)** and **QFN 6×6 mm (VSX)**. Pin 1 is the square pad. -- **Host interface** — USB 3.1 Gen 1 (SuperSpeed, 5 Gbps)-- **Network** — 10 / 100 / 1000 Mbps Ethernet, IEEE 802.3/3u/3ab/3az-- **Integrated PHY** — Gigabit Ethernet PHY with HP Auto-MDIX-- **USB speeds** — SS 5 Gbps / HS 480 Mbps / FS 12 Mbps, 4 endpoints-- **Configuration** — on-chip OTP memory (no external EEPROM)-- **Low power** — Energy Efficient Ethernet (802.3az), Wake-on-LAN, NetDetach-- **GPIO** — 8, with flexible link/activity LEDs-- **I/O supply** — 1.8 to 3.3 V (variable)-- **Package** — 48-pin QFN, 7×7 mm (Y9X) or 6×6 mm (VSX)-- **Temperature** — Commercial 0 to +70 °C / Industrial −40 to +85 °C-- **Offloads** — 802.1q VLAN tagging, 9 KB jumbo frames, IPv4/IPv6/TCP/UDP checksum offload, 32 wake-up frame patterns+## ⚡ Specifications -## Pin configuration+- 🔌 **Host interface** — USB 3.1 Gen 1 (SuperSpeed, 5 Gbps)+- 🌐 **Network** — 10 / 100 / 1000 Mbps Ethernet, IEEE 802.3/3u/3ab/3az+- 📡 **Integrated PHY** — Gigabit Ethernet PHY with HP Auto-MDIX+- ⚡ **USB speeds** — SS 5 Gbps / HS 480 Mbps / FS 12 Mbps, 4 endpoints+- 🧠 **Configuration** — on-chip OTP memory (no external EEPROM)+- 🔋 **Low power** — Energy Efficient Ethernet (802.3az), Wake-on-LAN, NetDetach+- 💡 **GPIO** — 8, with flexible link/activity LEDs+- 🎚️ **I/O supply** — 1.8 to 3.3 V (variable)+- 📦 **Package** — 48-pin QFN, 7×7 mm (Y9X) or 6×6 mm (VSX)+- 🌡️ **Temperature** — Commercial 0 to +70 °C / Industrial −40 to +85 °C+- 🚀 **Offloads** — 802.1q VLAN tagging, 9 KB jumbo frames, IPv4/IPv6/TCP/UDP checksum offload, 32 wake-up frame patterns++## 📌 Pin configuration 48 signal pins plus the exposed thermal pad (pin 49, VSS). Names and numbers match the schematic symbol and both footprints. @@ -74,13 +76,13 @@ The interactive **symbol** and **footprint** viewers above are rendered by the w | 48 | REF_FILT | Analog | PHY internal-regulator filter connection | | 49 | VSS | Ground | Exposed thermal pad — connect to ground with a via field | -## Component variants+## 📦 Component variants -Eight orderable part numbers exist. All are the **identical LAN7800 silicon** — they differ only in **package body size**, **operating-temperature grade** and **shipping/packaging**. There are no functional or electrical differences.+Eight orderable part numbers exist. All are the **identical LAN7800 silicon** — they differ only in **package body size**, **operating-temperature grade** and **shipping/packaging**. No functional or electrical differences. -**Order-code legend:** `LAN7800` `[T]` `[-I]` `/` `{Y9X | VSX}` — `T` = Tape & Reel (blank = tray), `-I` = Industrial (blank = Commercial), `Y9X` = 7×7 mm / `VSX` = 6×6 mm.+> 🏷️ **Order-code legend:** `LAN7800` `[T]` `[-I]` `/` `{Y9X | VSX}` — `T` = Tape & Reel (blank = tray), `-I` = Industrial (blank = Commercial), `Y9X` = 7×7 mm / `VSX` = 6×6 mm. -### QFN 7×7 mm — package code Y9X *(default footprint)*+### 🟩 QFN 7×7 mm — package code Y9X *(default footprint)* 0.5 mm pitch · 5.3 × 5.3 mm exposed pad · 1.0 mm body height. @@ -91,7 +93,7 @@ Eight orderable part numbers exist. All are the **identical LAN7800 silicon** � | `LAN7800-I/Y9X` | Tray | Industrial (−40 to +85 °C) | | `LAN7800T-I/Y9X` | Tape & Reel | Industrial (−40 to +85 °C) | -### QFN 6×6 mm — package code VSX+### 🟦 QFN 6×6 mm — package code VSX 0.4 mm pitch · 4.3 × 4.3 mm exposed pad · 0.9 mm body height. Same pinout, smaller board area. @@ -102,19 +104,19 @@ Eight orderable part numbers exist. All are the **identical LAN7800 silicon** � | `LAN7800-I/VSX` | Tray | Industrial (−40 to +85 °C) | | `LAN7800T-I/VSX` | Tape & Reel | Industrial (−40 to +85 °C) | -## Assets+## 🗂️ Assets CAD for every major EDA tool, generated from the canonical **adom-lbr JSON** so symbol, footprint and 3D stay in sync. | Tool | Files | |---|---|-| **KiCad** | [`lan7800.kicad_sym`](lan7800.kicad_sym) · [`lan7800-qfn48-7x7-y9x.kicad_mod`](lan7800-qfn48-7x7-y9x.kicad_mod) · [`lan7800-qfn48-6x6-vsx.kicad_mod`](lan7800-qfn48-6x6-vsx.kicad_mod) |-| **Fusion 360 / EAGLE** | [`lan7800.lbr`](lan7800.lbr) |-| **Altium** | [`lan7800.IntLib`](lan7800.IntLib) · [`lan7800.SchLib`](lan7800.SchLib) · [`lan7800.PcbLib`](lan7800.PcbLib) |-| **3D models** | [`lan7800.step`](lan7800.step) · [`lan7800.glb`](lan7800.glb) |-| **Canonical** | [`lan7800.adom-lbr.json`](lan7800.adom-lbr.json) |+| 🟢 **KiCad** | [`lan7800.kicad_sym`](lan7800.kicad_sym) · [`lan7800-qfn48-7x7-y9x.kicad_mod`](lan7800-qfn48-7x7-y9x.kicad_mod) · [`lan7800-qfn48-6x6-vsx.kicad_mod`](lan7800-qfn48-6x6-vsx.kicad_mod) |+| 🟠 **Fusion 360 / EAGLE** | [`lan7800.lbr`](lan7800.lbr) |+| 🔵 **Altium** | [`lan7800.IntLib`](lan7800.IntLib) · [`lan7800.SchLib`](lan7800.SchLib) · [`lan7800.PcbLib`](lan7800.PcbLib) |+| 🧊 **3D models** | [`lan7800.step`](lan7800.step) · [`lan7800.glb`](lan7800.glb) |+| ◇ **Canonical** | [`lan7800.adom-lbr.json`](lan7800.adom-lbr.json) | -## Applications+## 🔌 Applications Boards on the Adom wiki that use the LAN7800: @@ -122,9 +124,9 @@ Boards on the Adom wiki that use the LAN7800: Related tooling: [**LAN7800 EEPROM Programmer**](https://wiki.adom.inc/adom/lan7800-programmer). -## Provenance+## 📄 Provenance -- **Datasheet:** [Microchip LAN7800 (DS00001992)](docs/lan7800-datasheet.pdf)-- **Symbol, QFN 7×7 (Y9X) footprint, STEP + GLB:** Adom library, from the canonical adom-lbr JSON.-- **QFN 6×6 (VSX) footprint:** KiCad official library (`QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm`).-- Fusion and Altium libraries generated from the adom-lbr JSON with `adom-lbr`.+- 📘 **Datasheet:** [Microchip LAN7800 (DS00001992)](docs/lan7800-datasheet.pdf)+- 🧩 **Symbol, QFN 7×7 (Y9X) footprint, STEP + GLB:** Adom library, from the canonical adom-lbr JSON.+- 📐 **QFN 6×6 (VSX) footprint:** KiCad official library (`QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm`).+- 🔄 Fusion and Altium libraries generated from the adom-lbr JSON with `adom-lbr`.
keyfacts.pngadded⋯ 1 unchanged line ⋯
package.json+3−2@@ -3,7 +3,7 @@ "title": "SuperSpeed USB 3.1 to 10/100/1000 Ethernet Controller - LAN7800", "type": "component", "kind": "component",- "version": "1.0.4",+ "version": "1.0.5", "description": "Microchip LAN7800 \u2014 a single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Integrates a USB 3.1 device controller + PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX. Configured via on-chip OTP memory (no external EEPROM); supports Energy Efficient Ethernet, Wake-on-LAN, NetDetach, 4 USB endpoints, 802.1q VLAN, 9 KB jumbo frames and TCP/UDP checksum offload. Offered in 48-pin QFN 7x7 mm (Y9X) and 6x6 mm (VSX), commercial and industrial grades.", "tags": [ "component",@@ -46,6 +46,7 @@ "lan7800.IntLib", "lan7800.SchLib", "lan7800.PcbLib",- "screenshots/hero.png"+ "screenshots/hero.png",+ "keyfacts.png" ] }
page.json+27−23@@ -3,8 +3,8 @@ "type": "component", "slug": "lan7800", "title": "SuperSpeed USB 3.1 to 10/100/1000 Ethernet Controller - LAN7800",- "brief": "Microchip LAN7800 \u2014 single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller with integrated USB device controller + PHY, Ethernet MAC, and Gigabit PHY. QFN-48 in 7x7 mm (Y9X) and 6x6 mm (VSX).",- "version": "1.0.4",+ "brief": "Microchip LAN7800 — single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller with integrated USB device controller + PHY, Ethernet MAC, and Gigabit PHY. QFN-48 in 7x7 mm (Y9X) and 6x6 mm (VSX).",+ "version": "1.0.5", "tags": [ "component", "ic",@@ -24,30 +24,13 @@ "component": { "mpn": "LAN7800", "manufacturer": "Microchip Technology",- "package": "QFN-48 7x7mm P0.5mm (Y9X)",- "pin_count": 48, "category": "Ethernet Controller",- "subcategory": "USB 3.1 to Gigabit Ethernet bridge",- "datasheet": "https://www.microchip.com/en-us/product/lan7800", "parts": { "symbol": "lan7800.kicad_sym", "footprint": "lan7800-qfn48-7x7-y9x.kicad_mod",- "footprint_alt": "lan7800-qfn48-6x6-vsx.kicad_mod",- "model_3d": "lan7800.glb",- "model_3d_chip": "lan7800.glb",- "step": "lan7800.step"+ "model_3d": "lan7800.glb" },- "distributor_links": {- "lcsc": "C633488"- },- "datasheet_cover": "screenshots/datasheet-cover.png",- "viewer_3d": {- "ground": false- },- "viewers": {- "symbol": "viewer-symbol.html",- "footprint": "viewer-footprints.html"- }+ "model_3d_path": "lan7800.glb" }, "metadata": { "specs": {@@ -78,6 +61,27 @@ "type": "image", "path": "screenshots/hero.png" },- "description": "Microchip LAN7800 \u2014 a single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Integrates a USB 3.1 device controller + PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX. Configured via on-chip OTP memory (no external EEPROM); supports Energy Efficient Ethernet, Wake-on-LAN, NetDetach, 4 USB endpoints, 802.1q VLAN, 9 KB jumbo frames and TCP/UDP checksum offload. Offered in 48-pin QFN 7x7 mm (Y9X) and 6x6 mm (VSX), commercial and industrial grades.",- "dependencies": {}+ "description": "Microchip LAN7800 — a single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Integrates a USB 3.1 device controller + PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX. Configured via on-chip OTP memory (no external EEPROM); supports Energy Efficient Ethernet, Wake-on-LAN, NetDetach, 4 USB endpoints, 802.1q VLAN, 9 KB jumbo frames and TCP/UDP checksum offload. Offered in 48-pin QFN 7x7 mm (Y9X) and 6x6 mm (VSX), commercial and industrial grades.",+ "dependencies": {},+ "kind": "component",+ "files": [+ "page.json",+ "README.md",+ "lan7800.kicad_sym",+ "lan7800-qfn48-7x7-y9x.kicad_mod",+ "lan7800-qfn48-6x6-vsx.kicad_mod",+ "lan7800.step",+ "lan7800.glb",+ "lan7800.adom-lbr.json",+ "lan7800.lbr",+ "lan7800.IntLib",+ "lan7800.SchLib",+ "lan7800.PcbLib",+ "screenshots/hero.png",+ "keyfacts.png"+ ],+ "author": {+ "name": "barrett-land",+ "email": "[email protected]"+ } }