← Commit history

Publish 1.0.1

barrett-land ·2555f2f4e0 · ·parent 467e017
3 files changed +123−164
README.md+111−140
@@ -1,162 +1,133 @@ # LAN7800 — SuperSpeed USB 3.1 to Gigabit Ethernet Controller -## Summary--The **Microchip LAN7800** is a high-performance, single-chip **SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet** bridge controller. It integrates a USB 3.1 Gen 1 device controller and PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX into a single 48-pin QFN, delivering a complete USB-to-Ethernet solution for docking stations, dongles, notebooks, set-top boxes and embedded systems.--On the host side it supports **SuperSpeed (5 Gbps)**, High-Speed (480 Mbps) and Full-Speed (12 Mbps) with four endpoints and remote wakeup. On the network side it is fully compliant with **IEEE 802.3 / 802.3u / 802.3ab / 802.3az**, supporting 10BASE-T / 100BASE-TX / 1000BASE-T, 802.1q VLAN tagging, 9 KB jumbo frames, and hardware IPv4/IPv6/TCP/UDP checksum offload. Low-power operation is provided through Energy Efficient Ethernet, Wake-on-LAN and NetDetach (automatic USB attach/detach when the Ethernet cable is connected or removed). The device is configured entirely through on-chip **OTP memory** — no external EEPROM required — and ships with drivers for Windows, Linux, macOS, uBoot, UEFI, PXE and FreeBSD.--### Features--- **Single-chip** SuperSpeed USB 3.1 Gen 1 → 10/100/1000 Ethernet controller-- Integrated **Gigabit Ethernet PHY** with HP Auto-MDIX, auto-negotiation and automatic polarity correction-- Integrated **10/100/1000 Ethernet MAC** (full-duplex support; full-duplex only at 1000 Mbps)-- Integrated **USB 3.1 Gen 1 SuperSpeed** device controller + PHY — SS (5 Gbps) / HS (480 Mbps) / FS (12 Mbps), 4 endpoints, remote wakeup-- **Energy Efficient Ethernet** (IEEE 802.3az) and **Wake-on-LAN**-- **NetDetach** — automatic USB attach/detach on cable connect/remove-- Configuration via on-chip **One-Time-Programmable (OTP) memory**-- **8 GPIOs**, flexible link/activity LEDs, multiple power-management modes-- Variable I/O supply **1.8–3.3 V**; internal switching + linear regulators-- 802.1q VLAN tagging, 9 KB jumbo frames, IPv4/IPv6/TCP/UDP checksum offload, 32 wake-up frame patterns-- Broad driver support: **Windows 7/8/8.1/10, Linux, macOS, uBoot, UEFI, PXE, FreeBSD**-- Two package options — **48-pin QFN 7×7 mm (Y9X)** and **48-pin QFN 6×6 mm (VSX)** — in commercial and industrial temperature grades-------## Symbol & Footprint--### Schematic symbol--<iframe src="https://wiki.adom.inc/api/v1/pages/adom/lan7800/files/viewer-symbol.html" width="100%" height="560" style="border:0" loading="lazy" title="LAN7800 schematic symbol viewer"></iframe>--### Footprint--Two package footprints are available — use the toggle at the **top right** to switch between the **QFN 7×7 mm (Y9X)** and **QFN 6×6 mm (VSX)** variants.--<iframe src="https://wiki.adom.inc/api/v1/pages/adom/lan7800/files/viewer-footprints.html" width="100%" height="600" style="border:0" loading="lazy" title="LAN7800 footprint viewer (Y9X / VSX)"></iframe>-------## Pin Mapping--48 signal pins plus the exposed thermal pad (pin 49, VSS). The mapping below matches the schematic symbol and both footprints.--| Pin | Name | Function | Group |-|----:|------|----------|-------|-| 1 | `TR0P` | Gigabit Ethernet MDI pair 0 (+) | Ethernet PHY |-| 2 | `TR0N` | Gigabit Ethernet MDI pair 0 (−) | Ethernet PHY |-| 3 | `VDD25A` | Power — 2.5 V analog | Power |-| 4 | `TR1P` | Gigabit Ethernet MDI pair 1 (+) | Ethernet PHY |-| 5 | `TR1N` | Gigabit Ethernet MDI pair 1 (−) | Ethernet PHY |-| 6 | `VDD25A` | Power — 2.5 V analog | Power |-| 7 | `TR2P` | Gigabit Ethernet MDI pair 2 (+) | Ethernet PHY |-| 8 | `TR2N` | Gigabit Ethernet MDI pair 2 (−) | Ethernet PHY |-| 9 | `VDD25A` | Power — 2.5 V analog | Power |-| 10 | `TR3P` | Gigabit Ethernet MDI pair 3 (+) | Ethernet PHY |-| 11 | `TR3N` | Gigabit Ethernet MDI pair 3 (−) | Ethernet PHY |-| 12 | `VDD25A` | Power — 2.5 V analog | Power |-| 13 | `VDD12_SW_OUT` | Power — 1.2 V switching-regulator output | Power |-| 14 | `VDD_SW_IN` | Power — Switching-regulator input | Power |-| 15 | `VDD12_SW_FB` | Power — 1.2 V switching-regulator feedback | Power |-| 16 | `EECS/GPIO0` | OTP/EEPROM chip-select (SPI) / GPIO0 | Config / GPIO |-| 17 | `EEDI/GPIO1` | OTP/EEPROM data-in (SPI) / GPIO1 | Config / GPIO |-| 18 | `EEDO/LED0/GPIO2` | OTP/EEPROM data-out (SPI) / LED0 / GPIO2 | Config / GPIO |-| 19 | `EECLK/LED1/GPIO3` | OTP/EEPROM clock (SPI) / LED1 / GPIO3 | Config / GPIO |-| 20 | `VDDVARIO` | Power — Variable I/O (1.8–3.3 V) | Power |-| 21 | `VDD12CORE` | Power — 1.2 V digital core | Power |-| 22 | `PME_N/GPIO4` | Power-management-event output / GPIO4 | LED / GPIO |-| 23 | `VBUS_DET` | USB VBUS detect input | Control |-| 24 | `SUSPEND_N/LED2/GPIO5` | Suspend indicator / LED2 / GPIO5 | LED / GPIO |-| 25 | `VDD12A` | Power — 1.2 V analog | Power |-| 26 | `USB2_DP` | USB 2.0 HS/FS data + | USB 2.0 |-| 27 | `USB2_DM` | USB 2.0 HS/FS data − | USB 2.0 |-| 28 | `USB3_TXDP` | USB 3.1 Gen 1 SuperSpeed TX + | USB 3.1 SS |-| 29 | `USB3_TXDM` | USB 3.1 Gen 1 SuperSpeed TX − | USB 3.1 SS |-| 30 | `VDD12A` | Power — 1.2 V analog | Power |-| 31 | `USB3_RXDP` | USB 3.1 Gen 1 SuperSpeed RX + | USB 3.1 SS |-| 32 | `USB3_RXDM` | USB 3.1 Gen 1 SuperSpeed RX − | USB 3.1 SS |-| 33 | `LED3/GPIO6` | LED3 / GPIO6 (link/activity LED) | LED / GPIO |-| 34 | `TEST` | Test — connect per datasheet | Control |-| 35 | `RESET_N/PME_CLEAR` | Reset / PME clear, active-low | Control |-| 36 | `VDDVARIO` | Power — Variable I/O (1.8–3.3 V) | Power |-| 37 | `USBRBIAS` | USB bias resistor reference | Analog ref |-| 38 | `VDD33A` | Power — 3.3 V analog | Power |-| 39 | `VDDVARIO` | Power — Variable I/O (1.8–3.3 V) | Power |-| 40 | `XI` | 25 MHz crystal input | Clock |-| 41 | `XO` | 25 MHz crystal output | Clock |-| 42 | `VDD12CORE` | Power — 1.2 V digital core | Power |-| 43 | `PME_MODE/GPIO7` | PME mode strap / GPIO7 | LED / GPIO |-| 44 | `VDD12A` | Power — 1.2 V analog | Power |-| 45 | `VDD25_REG_OUT` | Power — 2.5 V internal-regulator output | Power |-| 46 | `VDD33_REG_IN` | Power — 3.3 V internal-regulator input | Power |-| 47 | `REF_REXT` | PHY bias resistor reference (external R to GND) | Analog ref |-| 48 | `REF_FILT` | PHY internal-regulator filter | Analog ref |-| 49 | `VSS` | Ground (exposed thermal pad — connect to GND via field) | Ground |-------## Component Variants--All eight orderable variants are the **identical LAN7800 silicon** — they differ only in **package body size**, **operating-temperature grade**, and **shipping/packaging**. There are no functional or electrical differences between them; choose by mechanical footprint and temperature range.--### QFN 7×7 mm — package code **Y9X** *(default on this page)*+The Microchip **LAN7800** is a single-chip **SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet** bridge controller. It integrates a USB 3.1 Gen 1 device controller and PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX into a single 48-pin QFN, giving a complete USB-to-Ethernet solution for docking stations, dongles, notebooks, set-top boxes and embedded systems. It is configured entirely through on-chip OTP memory (no external EEPROM) and ships with drivers for Windows, Linux, macOS, uBoot, UEFI, PXE and FreeBSD.++The interactive symbol, footprint, and 3D model above are rendered by the wiki from the CAD shipped with this page. Use the toggle at the top right of the footprint viewer to switch between the **QFN 7×7 mm (Y9X)** and **QFN 6×6 mm (VSX)** packages. Pin 1 is the square pad.++## Specifications++| Spec | Value |+|---|---|+| Host interface | USB 3.1 Gen 1 (SuperSpeed, 5 Gbps) |+| Network | 10 / 100 / 1000 Mbps Ethernet, IEEE 802.3/3u/3ab/3az |+| Integrated PHY | Gigabit Ethernet PHY with HP Auto-MDIX |+| USB speeds | SS 5 Gbps / HS 480 Mbps / FS 12 Mbps, 4 endpoints |+| Configuration | On-chip OTP memory (no external EEPROM) |+| Low power | Energy Efficient Ethernet (802.3az), Wake-on-LAN, NetDetach |+| GPIO | 8, with flexible link/activity LEDs |+| I/O supply | 1.8 to 3.3 V (variable) |+| Package | 48-pin QFN, 7×7 mm (Y9X) or 6×6 mm (VSX) |+| Temperature | Commercial 0 to +70 °C / Industrial −40 to +85 °C |++Offloads and framing: 802.1q VLAN tagging, 9 KB jumbo frames, IPv4/IPv6/TCP/UDP checksum offload, 32 wake-up frame patterns, flexible address filtering.++## Pin configuration++48 signal pins plus the exposed thermal pad (pin 49, VSS). Names and numbers match the schematic symbol and both footprints.++| Pin | Name | Group | Function |+|---|---|---|---|+| 1 | TR0P | Ethernet PHY | Gigabit Ethernet MDI pair 0 (+); 10/100/1000BASE-T media-dependent interface |+| 2 | TR0N | Ethernet PHY | Gigabit Ethernet MDI pair 0 (−); 10/100/1000BASE-T media-dependent interface |+| 3 | VDD25A | Power | 2.5 V analog supply |+| 4 | TR1P | Ethernet PHY | Gigabit Ethernet MDI pair 1 (+); 10/100/1000BASE-T media-dependent interface |+| 5 | TR1N | Ethernet PHY | Gigabit Ethernet MDI pair 1 (−); 10/100/1000BASE-T media-dependent interface |+| 6 | VDD25A | Power | 2.5 V analog supply |+| 7 | TR2P | Ethernet PHY | Gigabit Ethernet MDI pair 2 (+); 10/100/1000BASE-T media-dependent interface |+| 8 | TR2N | Ethernet PHY | Gigabit Ethernet MDI pair 2 (−); 10/100/1000BASE-T media-dependent interface |+| 9 | VDD25A | Power | 2.5 V analog supply |+| 10 | TR3P | Ethernet PHY | Gigabit Ethernet MDI pair 3 (+); 10/100/1000BASE-T media-dependent interface |+| 11 | TR3N | Ethernet PHY | Gigabit Ethernet MDI pair 3 (−); 10/100/1000BASE-T media-dependent interface |+| 12 | VDD25A | Power | 2.5 V analog supply |+| 13 | VDD12_SW_OUT | Power | 1.2 V switching-regulator output |+| 14 | VDD_SW_IN | Power | Switching-regulator input |+| 15 | VDD12_SW_FB | Power | 1.2 V switching-regulator feedback |+| 16 | EECS/GPIO0 | Config / GPIO | OTP/EEPROM chip-select (SPI), muxed with GPIO0 |+| 17 | EEDI/GPIO1 | Config / GPIO | OTP/EEPROM data-in (SPI), muxed with GPIO1 |+| 18 | EEDO/LED0/GPIO2 | Config / GPIO | OTP/EEPROM data-out (SPI), muxed with LED0 / GPIO2 |+| 19 | EECLK/LED1/GPIO3 | Config / GPIO | OTP/EEPROM clock (SPI), muxed with LED1 / GPIO3 |+| 20 | VDDVARIO | Power | Variable I/O supply (1.8–3.3 V) |+| 21 | VDD12CORE | Power | 1.2 V digital core supply |+| 22 | PME_N/GPIO4 | LED / GPIO | Power-management-event output, muxed with GPIO4 |+| 23 | VBUS_DET | Control | USB VBUS detect input |+| 24 | SUSPEND_N/LED2/GPIO5 | LED / GPIO | Suspend indicator, muxed with LED2 / GPIO5 |+| 25 | VDD12A | Power | 1.2 V analog supply |+| 26 | USB2_DP | USB 2.0 | USB 2.0 High-/Full-Speed data + |+| 27 | USB2_DM | USB 2.0 | USB 2.0 High-/Full-Speed data − |+| 28 | USB3_TXDP | USB 3.1 SS | USB 3.1 Gen 1 SuperSpeed transmit + |+| 29 | USB3_TXDM | USB 3.1 SS | USB 3.1 Gen 1 SuperSpeed transmit − |+| 30 | VDD12A | Power | 1.2 V analog supply |+| 31 | USB3_RXDP | USB 3.1 SS | USB 3.1 Gen 1 SuperSpeed receive + |+| 32 | USB3_RXDM | USB 3.1 SS | USB 3.1 Gen 1 SuperSpeed receive − |+| 33 | LED3/GPIO6 | LED / GPIO | Link/activity LED, muxed with GPIO (LED3/GPIO6) |+| 34 | TEST | Control | Factory test — connect per datasheet |+| 35 | RESET_N/PME_CLEAR | Control | Active-low chip reset, muxed with PME clear |+| 36 | VDDVARIO | Power | Variable I/O supply (1.8–3.3 V) |+| 37 | USBRBIAS | Analog | USB bias — external reference resistor |+| 38 | VDD33A | Power | 3.3 V analog supply |+| 39 | VDDVARIO | Power | Variable I/O supply (1.8–3.3 V) |+| 40 | XI | Clock | 25 MHz crystal / external clock input |+| 41 | XO | Clock | 25 MHz crystal output |+| 42 | VDD12CORE | Power | 1.2 V digital core supply |+| 43 | PME_MODE/GPIO7 | LED / GPIO | PME mode strap, muxed with GPIO7 |+| 44 | VDD12A | Power | 1.2 V analog supply |+| 45 | VDD25_REG_OUT | Power | 2.5 V internal-regulator output |+| 46 | VDD33_REG_IN | Power | 3.3 V internal-regulator input |+| 47 | REF_REXT | Analog | PHY bias — external reference resistor to ground |+| 48 | REF_FILT | Analog | PHY internal-regulator filter connection |+| 49 | VSS | Ground | Exposed thermal pad — connect to ground with a via field |++## Component variants++Eight orderable part numbers exist. All are the **identical LAN7800 silicon** — they differ only in **package body size**, **operating-temperature grade** and **shipping/packaging**. There are no functional or electrical differences; choose by mechanical footprint and temperature range.++**Order-code legend:** `LAN7800` `[T]` `[-I]` `/` `{Y9X | VSX}` — `T` = Tape & Reel (blank = tray), `-I` = Industrial (blank = Commercial), `Y9X` = 7×7 mm / `VSX` = 6×6 mm.++### QFN 7×7 mm — package code Y9X *(default footprint on this page)*  0.5 mm pitch · 5.3 × 5.3 mm exposed pad · 1.0 mm body height.  | Order code | Packaging | Temperature grade |-|------------|-----------|-------------------|-| `LAN7800/Y9X`     | Tray          | Commercial (0 °C to +70 °C) |-| `LAN7800T/Y9X`    | Tape & Reel   | Commercial (0 °C to +70 °C) |-| `LAN7800-I/Y9X`   | Tray          | Industrial (−40 °C to +85 °C) |-| `LAN7800T-I/Y9X`  | Tape & Reel   | Industrial (−40 °C to +85 °C) |+|---|---|---|+| `LAN7800/Y9X` | Tray | Commercial (0 to +70 °C) |+| `LAN7800T/Y9X` | Tape & Reel | Commercial (0 to +70 °C) |+| `LAN7800-I/Y9X` | Tray | Industrial (−40 to +85 °C) |+| `LAN7800T-I/Y9X` | Tape & Reel | Industrial (−40 to +85 °C) | -### QFN 6×6 mm — package code **VSX**+### QFN 6×6 mm — package code VSX -0.4 mm pitch · 4.3 × 4.3 mm exposed pad · 0.9 mm body height. Same pinout; smaller board area for space-constrained designs.+0.4 mm pitch · 4.3 × 4.3 mm exposed pad · 0.9 mm body height. Same pinout, smaller board area for space-constrained designs.  | Order code | Packaging | Temperature grade |-|------------|-----------|-------------------|-| `LAN7800/VSX`     | Tray          | Commercial (0 °C to +70 °C) |-| `LAN7800T/VSX`    | Tape & Reel   | Commercial (0 °C to +70 °C) |-| `LAN7800-I/VSX`   | Tray          | Industrial (−40 °C to +85 °C) |-| `LAN7800T-I/VSX`  | Tape & Reel   | Industrial (−40 °C to +85 °C) |--**Order-code legend:** `LAN7800` `[T]` `[-I]` `/` `{Y9X|VSX}` — `T` = Tape & Reel (blank = tray), `-I` = Industrial (blank = Commercial), `Y9X` = 7×7 mm / `VSX` = 6×6 mm.-------## Datasheet--<iframe src="https://wiki.adom.inc/api/v1/pages/adom/lan7800/files/lan7800-datasheet.pdf" width="100%" height="820" style="border:0" title="LAN7800 datasheet"></iframe>--[Download the full datasheet (PDF)](lan7800-datasheet.pdf) · Microchip DS00001992-----+|---|---|---|+| `LAN7800/VSX` | Tray | Commercial (0 to +70 °C) |+| `LAN7800T/VSX` | Tape & Reel | Commercial (0 to +70 °C) |+| `LAN7800-I/VSX` | Tray | Industrial (−40 to +85 °C) |+| `LAN7800T-I/VSX` | Tape & Reel | Industrial (−40 to +85 °C) |  ## Assets -Preview or download the CAD libraries — switch between **KiCad**, **Fusion 360** and **Altium** — plus the 3D models.--<iframe src="https://wiki.adom.inc/api/v1/pages/adom/lan7800/files/assets.html" width="100%" height="520" style="border:0" loading="lazy" title="LAN7800 CAD assets"></iframe>-------## Thumbnails--| Schematic symbol | Footprint — QFN 7×7 (Y9X) | Footprint — QFN 6×6 (VSX) |-|:---:|:---:|:---:|-| ![LAN7800 symbol](thumb-symbol.svg) | ![QFN 7x7 footprint](thumb-fp-y9x.svg) | ![QFN 6x6 footprint](thumb-fp-vsx.svg) |+CAD for every major EDA tool, generated from the canonical **adom-lbr JSON** so symbol, footprint and 3D stay in sync. ----+| Tool | Files |+|---|---|+| **KiCad** | [`lan7800.kicad_sym`](lan7800.kicad_sym) · [`lan7800-qfn48-7x7-y9x.kicad_mod`](lan7800-qfn48-7x7-y9x.kicad_mod) · [`lan7800-qfn48-6x6-vsx.kicad_mod`](lan7800-qfn48-6x6-vsx.kicad_mod) |+| **Fusion 360 / EAGLE** | [`lan7800.lbr`](lan7800.lbr) |+| **Altium** | [`lan7800.IntLib`](lan7800.IntLib) · [`lan7800.SchLib`](lan7800.SchLib) · [`lan7800.PcbLib`](lan7800.PcbLib) |+| **3D models** | [`lan7800.step`](lan7800.step) · [`lan7800.glb`](lan7800.glb) |+| **Canonical** | [`lan7800.adom-lbr.json`](lan7800.adom-lbr.json) — symbol + footprint + pin↔pad map |  ## Applications  Boards on the Adom wiki that use the LAN7800: -1. **[USB3.0 to Ethernet Molecule](https://wiki.adom.inc/adom/usb3-to-ethernet-dataonly-molecule)** — USB-C to Gigabit Ethernet (data-only) adapter on the LAN7800 (U1).+1. [**USB3.0 to Ethernet Molecule**](https://wiki.adom.inc/adom/usb3-to-ethernet-dataonly-molecule) — USB-C to Gigabit Ethernet (data-only) adapter on the LAN7800 (U1). -*More boards will be listed here as they are published.*+Related tooling: [**LAN7800 EEPROM Programmer**](https://wiki.adom.inc/adom/lan7800-programmer) — read/edit/program MAC, VID/PID and strings on a LAN7800 adapter. ----+## Provenance -*Related: [LAN7800 EEPROM Programmer](https://wiki.adom.inc/adom/lan7800-programmer) · symbol/footprint/3D + canonical adom-lbr JSON in the Assets section above.*+- **Datasheet:** [Microchip LAN7800 (DS00001992)](docs/lan7800-datasheet.pdf) — embedded on this page.+- **Symbol, QFN 7×7 (Y9X) footprint, STEP + GLB:** Adom library, from the canonical [adom-lbr JSON](lan7800.adom-lbr.json).+- **QFN 6×6 (VSX) footprint:** KiCad official library (`QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm`, matching the datasheet VSX 4.3×4.3 mm exposed pad).+- Fusion and Altium libraries generated from the adom-lbr JSON with `adom-lbr`.
package.json+6−13
@@ -3,7 +3,7 @@   "title": "SuperSpeed USB 3.1 to 10/100/1000 Ethernet Controller - LAN7800",   "type": "component",   "kind": "component",-  "version": "1.0.0",+  "version": "1.0.1",   "description": "Microchip LAN7800 — a single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Integrates a USB 3.1 device controller + PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX. Configured via on-chip OTP memory (no external EEPROM); supports Energy Efficient Ethernet, Wake-on-LAN, NetDetach, 4 USB endpoints, 802.1q VLAN, 9 KB jumbo frames and TCP/UDP checksum offload. Offered in 48-pin QFN 7x7 mm (Y9X) and 6x6 mm (VSX), commercial and industrial grades.",   "tags": [     "component",@@ -22,17 +22,19 @@     "manufacturer": "Microchip Technology",     "category": "Ethernet Controller",     "parts": {+      "symbol": "lan7800.kicad_sym",+      "footprint": "lan7800-qfn48-7x7-y9x.kicad_mod",       "model_3d": "lan7800.glb"     },     "model_3d_path": "lan7800.glb"   },   "hero": {-    "headline": "LAN7800",-    "subhead": "SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller — Microchip",-    "screenshot": "screenshots/hero.png"+    "type": "image",+    "path": "screenshots/hero.png"   },   "dependencies": {},   "files": [+    "page.json",     "README.md",     "lan7800.kicad_sym",     "lan7800-qfn48-7x7-y9x.kicad_mod",@@ -44,15 +46,6 @@     "lan7800.IntLib",     "lan7800.SchLib",     "lan7800.PcbLib",-    "lan7800-datasheet.pdf",-    "viewer-symbol.html",-    "viewer-fp-y9x.html",-    "viewer-fp-vsx.html",-    "viewer-footprints.html",-    "assets.html",-    "thumb-symbol.svg",-    "thumb-fp-y9x.svg",-    "thumb-fp-vsx.svg",     "screenshots/hero.png"   ] }
page.json+6−11
@@ -2,7 +2,7 @@   "slug": "lan7800",   "title": "SuperSpeed USB 3.1 to 10/100/1000 Ethernet Controller - LAN7800",   "type": "component",-  "version": "1.0.0",+  "version": "1.0.1",   "description": "Microchip LAN7800 — a single-chip SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Integrates a USB 3.1 device controller + PHY, a 10/100/1000 Ethernet MAC, and a Gigabit Ethernet PHY with HP Auto-MDIX. Configured via on-chip OTP memory (no external EEPROM); supports Energy Efficient Ethernet, Wake-on-LAN, NetDetach, 4 USB endpoints, 802.1q VLAN, 9 KB jumbo frames and TCP/UDP checksum offload. Offered in 48-pin QFN 7x7 mm (Y9X) and 6x6 mm (VSX), commercial and industrial grades.",   "tags": [     "component",@@ -21,6 +21,8 @@     "manufacturer": "Microchip Technology",     "category": "Ethernet Controller",     "parts": {+      "symbol": "lan7800.kicad_sym",+      "footprint": "lan7800-qfn48-7x7-y9x.kicad_mod",       "model_3d": "lan7800.glb"     },     "model_3d_path": "lan7800.glb"@@ -33,6 +35,7 @@   },   "dependencies": {},   "files": [+    "page.json",     "README.md",     "lan7800.kicad_sym",     "lan7800-qfn48-7x7-y9x.kicad_mod",@@ -44,15 +47,6 @@     "lan7800.IntLib",     "lan7800.SchLib",     "lan7800.PcbLib",-    "lan7800-datasheet.pdf",-    "viewer-symbol.html",-    "viewer-fp-y9x.html",-    "viewer-fp-vsx.html",-    "viewer-footprints.html",-    "assets.html",-    "thumb-symbol.svg",-    "thumb-fp-y9x.svg",-    "thumb-fp-vsx.svg",     "screenshots/hero.png"   ],   "org": "adom",@@ -62,5 +56,6 @@   },   "visibility": {     "public": true-  }+  },+  "kind": "component" }\ No newline at end of file