main
Ray
l7987tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
ee6d0d9
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248
{
"schema_version": 1,
"type": "component",
"slug": "l7987tr",
"title": "L7987TR",
"brief": "STMicroelectronics DC-DC Converters, HTSSOP-16-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"l7987tr"
],
"component": {
"mpn": "L7987TR",
"manufacturer": "STMicroelectronics",
"package": "HTSSOP-16-EP",
"pin_count": 17,
"category": "PMIC",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.st.com/resource/en/datasheet/l7987tr.pdf",
"parts": {
"symbol": "l7987tr.kicad_sym",
"footprint": "l7987tr.kicad_mod",
"model_3d": "l7987tr-etched.glb",
"model_3d_plain": "l7987tr.glb",
"model_3d_step": "l7987tr-etched.step",
"model_3d_step_plain": "l7987tr.step",
"lbr": "l7987tr.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "VBIAS",
"type": "power_in",
"description": "Auxiliary input to supply part of the analog circuitry to increase efficiency at light load. Typically tied to the regulated output voltage or an external rail higher than 3 V; connect to signal GND (or bypass with a 1 uF ceramic) if unused."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "DC input voltage (4.5 V to 61 V operating range). Tie both VIN pins together at the package."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "DC input voltage (4.5 V to 61 V operating range). Tie both VIN pins together at the package."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Filtered DC input voltage to the internal circuitry. Bypass to signal GND with a 1 uF ceramic capacitor."
},
{
"number": "5",
"name": "EN",
"type": "input",
"description": "Active-high enable pin (device OFF <= 0.30 V, ON >= 0.35 V). Connect to VCC if not used."
},
{
"number": "6",
"name": "SS",
"type": "passive",
"description": "Soft-start pin. An internal 5 uA typ. current source charges an external capacitor from this pin to set the soft-start time."
},
{
"number": "7",
"name": "SYNCH",
"type": "bidirectional",
"description": "Master/slave synchronization pin. Sources a pulse when configured as master and accepts an external sync input (>=280 kHz) when configured as slave; up to 5 slave devices can share this line."
},
{
"number": "8",
"name": "COMP",
"type": "output",
"description": "Error-amplifier output. Compensation network (Type II or Type III) is connected between COMP and FB/GND to shape the loop response."
},
{
"number": "9",
"name": "FB",
"type": "input",
"description": "Inverting input of the error amplifier (VFB = 0.8 V typ.). Connect to the output resistor divider to set the regulated output voltage."
},
{
"number": "10",
"name": "FSW",
"type": "passive",
"description": "Switching-frequency programming pin. A pull-down resistor to GND selects the switching frequency (250 kHz - 1.5 MHz); leaving FSW floating sets ~250 kHz."
},
{
"number": "11",
"name": "ILIM",
"type": "passive",
"description": "Peak-current-limit programming pin. A pull-down resistor to GND selects the inductor peak current limit; floating ILIM yields the default ~4.0 A limit."
},
{
"number": "12",
"name": "PGOOD",
"type": "output",
"description": "Open-collector power-good output. Pulled low when the FB voltage is out of regulation (rising threshold 0.70 V typ., 30 mV hysteresis); requires an external pull-up."
},
{
"number": "13",
"name": "LX",
"type": "power_out",
"description": "Switching node (output of the internal high-side n-DMOS). Tie both LX pins together and connect to the external inductor and freewheeling diode."
},
{
"number": "14",
"name": "LX",
"type": "power_out",
"description": "Switching node (output of the internal high-side n-DMOS). Tie both LX pins together and connect to the external inductor and freewheeling diode."
},
{
"number": "15",
"name": "BOOT",
"type": "passive",
"description": "Bootstrap pin for the high-side gate drive. Connect a 100 nF ceramic capacitor (typ.) between BOOT and LX; the internal regulator refreshes the boot capacitor during the off-time."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Signal ground reference for the internal analog circuitry."
},
{
"number": "17",
"name": "EP",
"type": "power_in",
"description": "Exposed thermal pad on package underside. Must be connected to signal GND and to a large copper area for heat dissipation (RthJA = 40 C/W on demo board)."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/l7987tr.pdf",
"pages": 37,
"sha256": "9ea1c120a6bc8ac2",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "l7987tr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "l7987tr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "e5ddcb1aa4b9455d4938e7ec5e04dd854ae7adf075d43b754800003800479ad6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "HTSSOP-16-EP",
"Category": "PMIC",
"Pins": "17"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"l7987tr"
],
"discovery_pitch": "L7987TR (STMicroelectronics) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l7987tr.kicad_sym",
"l7987tr.kicad_mod",
"l7987tr.glb",
"l7987tr.step",
"l7987tr.lbr",
"docs/hero.png",
"docs/l7987tr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"l7987tr-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "L7987TR",
"kind": "packaging"
}
],
"updated_at": "2026-09-24T23:40:35.294Z"
}