main
Ray
Publish 0.1.0
01484a0
L7812ABV
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
L7812ABV from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Unregulated DC input voltage, absolute maximum 35 V for 5 to 18 V output versions (40 V for 20/24 V versions); L7812A needs Vi of about 14.8 to 27 V for regulation. |
| 2 | OUTPUT | power_out | Regulated 12 V output (11.75 to 12.25 V at Tj = 25 °C) with output current in excess of 1 A, internally limited. |
| 3 | GROUND | power_in | Common ground reference for input and output; the TO-220 tab is also connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Tj = 25 oC) | Vo | 11.75 | 12 | 12.25 | V | Tj = 25 oC | 9 |
| Output Voltage (full load/line range) | Vo | 11.5 | 12 | 12.5 | V | Io = 5 mA to 1 A, Po <= 15 W, Vi = 14.8 to 27 V | 9 |
| Line Regulation | ∆Vo | 13 | 120 | mV | Vi = 14.8 to 30 V, Io = 500 mA | 9 | |
| Line Regulation | ∆Vo | 16 | 120 | mV | Vi = 16 to 22 V | 9 | |
| Line Regulation | ∆Vo | 6 | 60 | mV | Vi = 16 to 22 V, Tj = 25 oC | 9 | |
| Load Regulation | ∆Vo | 25 | 100 | mV | Io = 5 mA to 1 A | 9 | |
| Load Regulation | ∆Vo | 30 | 100 | mV | Io = 5 mA to 1.5 A, Tj = 25 oC | 9 | |
| Load Regulation | ∆Vo | 10 | 50 | mV | Io = 250 to 750 mA | 9 | |
| Quiescent Current | Id | 4.4 | 6 | mA | Tj = 25 oC | 9 | |
| Quiescent Current Change | ∆Id | 0.8 | mA | Vi = 15 to 30 V, Io = 500 mA | 9 | ||
| Quiescent Current Change | ∆Id | 0.5 | mA | Io = 5 mA to 1 A | 9 | ||
| Supply Voltage Rejection | SVR | 60 | dB | Vi = 15 to 25 V, f = 120 Hz, Io = 500 mA | 9 | ||
| Dropout Voltage | Vd | 2 | V | Io = 1 A, Tj = 25 oC | 9 | ||
| Output Noise Voltage | eN | 10 | µV/Vo | B = 10 Hz to 100 KHz, Tj = 25 oC | 9 | ||
| Output Resistance | Ro | 18 | mΩ | f = 1 KHz | 9 | ||
| Short Circuit Current | Isc | 0.2 | A | Vi = 35 V, Tamb = 25 oC | 9 | ||
| Short Circuit Peak Current | Iscp | 2.2 | A | Tj = 25 oC | 9 | ||
| Output Voltage Drift | ∆Vo/∆T | -1 | mV/oC | 9 | |||
| DC Input Voltage (for VO = 5 to 18 V) | Vi | 35 | V | for VO = 5 to 18 V (applies to 12 V output) | 2 | ||
| Operating Junction Temperature Range (L7800AB) | Top | -40 | 125 | oC | for L7800AB | 2 | |
| Storage Temperature Range | Tstg | -65 | 150 | oC | 2 | ||
| Thermal Resistance Junction-case | Rthj-case | 3 | oC/W | Max, TO-220 and D2PAK | 2 | ||
| Thermal Resistance Junction-ambient | Rthj-amb | 50 | oC/W | Max, TO-220 column | 2 |
CAD (KiCad official)
- Symbol:
L7812ABV - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
l7812abv-etched.step/l7812abv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l7812abv.step/l7812abv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (17 pp, sha256
e34f68a038fbf4a9, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L7812ABV
**STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
L7812ABV from STMicroelectronics, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Unregulated DC input voltage, absolute maximum 35 V for 5 to 18 V output versions (40 V for 20/24 V versions); L7812A needs Vi of about 14.8 to 27 V for regulation. |
| 2 | OUTPUT | power_out | Regulated 12 V output (11.75 to 12.25 V at Tj = 25 °C) with output current in excess of 1 A, internally limited. |
| 3 | GROUND | power_in | Common ground reference for input and output; the TO-220 tab is also connected to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Tj = 25 oC) | Vo | 11.75 | 12 | 12.25 | V | Tj = 25 oC | 9 |
| Output Voltage (full load/line range) | Vo | 11.5 | 12 | 12.5 | V | Io = 5 mA to 1 A, Po <= 15 W, Vi = 14.8 to 27 V | 9 |
| Line Regulation | ∆Vo | | 13 | 120 | mV | Vi = 14.8 to 30 V, Io = 500 mA | 9 |
| Line Regulation | ∆Vo | | 16 | 120 | mV | Vi = 16 to 22 V | 9 |
| Line Regulation | ∆Vo | | 6 | 60 | mV | Vi = 16 to 22 V, Tj = 25 oC | 9 |
| Load Regulation | ∆Vo | | 25 | 100 | mV | Io = 5 mA to 1 A | 9 |
| Load Regulation | ∆Vo | | 30 | 100 | mV | Io = 5 mA to 1.5 A, Tj = 25 oC | 9 |
| Load Regulation | ∆Vo | | 10 | 50 | mV | Io = 250 to 750 mA | 9 |
| Quiescent Current | Id | | 4.4 | 6 | mA | Tj = 25 oC | 9 |
| Quiescent Current Change | ∆Id | | | 0.8 | mA | Vi = 15 to 30 V, Io = 500 mA | 9 |
| Quiescent Current Change | ∆Id | | | 0.5 | mA | Io = 5 mA to 1 A | 9 |
| Supply Voltage Rejection | SVR | | 60 | | dB | Vi = 15 to 25 V, f = 120 Hz, Io = 500 mA | 9 |
| Dropout Voltage | Vd | | 2 | | V | Io = 1 A, Tj = 25 oC | 9 |
| Output Noise Voltage | eN | | 10 | | µV/Vo | B = 10 Hz to 100 KHz, Tj = 25 oC | 9 |
| Output Resistance | Ro | | 18 | | mΩ | f = 1 KHz | 9 |
| Short Circuit Current | Isc | | 0.2 | | A | Vi = 35 V, Tamb = 25 oC | 9 |
| Short Circuit Peak Current | Iscp | | 2.2 | | A | Tj = 25 oC | 9 |
| Output Voltage Drift | ∆Vo/∆T | | -1 | | mV/oC | | 9 |
| DC Input Voltage (for VO = 5 to 18 V) | Vi | | | 35 | V | for VO = 5 to 18 V (applies to 12 V output) | 2 |
| Operating Junction Temperature Range (L7800AB) | Top | -40 | | 125 | oC | for L7800AB | 2 |
| Storage Temperature Range | Tstg | -65 | | 150 | oC | | 2 |
| Thermal Resistance Junction-case | Rthj-case | | | 3 | oC/W | Max, TO-220 and D2PAK | 2 |
| Thermal Resistance Junction-ambient | Rthj-amb | | | 50 | oC/W | Max, TO-220 column | 2 |
## CAD (KiCad official)
- Symbol: `L7812ABV`
- Footprint: `Package_TO_SOT_THT:TO-220-3_Vertical`
- 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files: `l7812abv-etched.step` / `l7812abv-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l7812abv.step` / `l7812abv.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887063571664896) (17 pp, sha256 `e34f68a038fbf4a9`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l7812abv-datasheet.pdf)