main
Ray
l6981ndr: specified limits as data (metadata.characteristics, 42 rows from the datasheet)
fd7e26b
L6981NDR
STMicroelectronics · DC-DC Converters · SO-8
L6981NDR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching node output for the internal power stage. |
| 2 | BOOT | output | Bootstrap capacitor pin; connect 100 nF external capacitor between BOOT and SW to supply high-side gate drive voltage. |
| 3 | VCC | power_in | Analog power supply input; connect ≥1 µF ceramic capacitor to filter voltage reference. |
| 4 | VOUT/FB | input | Feedback input for adjustable versions; use external resistor divider to set output voltage to 0.85 V nominal reference. |
| 5 | EN/CLKIN | input | Enable input; enable rising threshold 1.08-1.32 V (typical 1.2 V), disable falling threshold ~1.0 V; in LNM versions also accepts external clock (200-500 kHz) for synchronization. |
| 6 | AGND | power_in | Analog ground reference. |
| 7 | VIN | power_in | DC input voltage supply; operating range 3.5 V to 38 V. |
| 8 | PGND | power_in | Power ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Maximum pin voltage | VIN | -0.3 | 42 | V | 5 | ||
| PGND to AGND Maximum pin voltage | PGND to AGND | -0.3 | 0.3 | V | 5 | ||
| VCC Maximum pin voltage | VCC | -0.3 | V | 5 | |||
| VOUT/FB Maximum pin voltage | VOUT/FB | -0.3 | 8 | V | 5 | ||
| EN Maximum pin voltage | EN | -0.3 | V | 5 | |||
| SW Maximum pin voltage | SW | -0.85 | V | 5 | |||
| SW Maximum pin voltage (transient) | SW | -3.9 | V | for 0.5 ns | 5 | ||
| High-side / Low-side RMS switch current | IHS, ILS | 1.5 | A | RMS switch current | 5 | ||
| Operating temperature range (junction) | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 5 | ||
| Lead temperature | TLEAD | 260 | °C | soldering 10 sec. | 5 | ||
| Operating input voltage range | VIN | 3.5 | 38 | V | 6 | ||
| VCC rising threshold | VINH | 2.3 | 3.3 | V | 6 | ||
| VCC UVLO falling threshold | VINL | 2.15 | 3.15 | V | 6 | ||
| Peak current limit | IPK | 2 | 2.3 | A | No slope contribution | 6 | |
| Peak current limit | IPK | 1.55 | 1.8 | A | Full slope contribution | 6 | |
| Valley current limit | IVY | 1.7 | 2 | 2.3 | A | 6 | |
| Reverse current limit | IVY_SINK | 1.25 | 1.5 | 1.75 | A | LNM or VOUT overvoltage | 6 |
| Switching frequency | FSW | 360 | 400 | 440 | KHz | 6 | |
| Shutdown current from VIN | ISHTDWN | 2 | 3 | μA | EN = GND | 6 | |
| Quiescent current from VIN (LNM device) | IQ_VIN | 1.6 | 2.3 | 3 | mA | ADJ part number | 6 |
| VCC LDO output voltage | VCC | 3 | 3.3 | 3.6 | V | 6 | |
| Enable threshold | VEN | 1.08 | 1.2 | 1.32 | V | Rising | 6 |
| Internal soft-start | TSS | 1 | 1.3 | 1.6 | ms | 6 | |
| Voltage feedback (adjustable version) | VFB | 0.845 | 0.85 | 0.855 | V | Adjustable version TJ = 25 °C | 6 |
| Voltage feedback (adjustable version) | VFB | 0.842 | 0.85 | 0.858 | V | Adjustable version TJ = -40 °C ≤ TJ ≤ 125 °C | 6 |
| Overvoltage trip (VOVP/VREF) | VOVP | 115 | 120 | 125 | % | 7 | |
| Overvoltage hysteresis | VOVP_HYST | 1 | 2 | 6 | % | 7 | |
| Synchronization range | fCLKIN | 200 | 500 | KHz | LNM versions only | 7 | |
| Synchronization pulse ON and OFF time | VCLKIN_T | 60 | ns | 2.3 ≤ VCLKIN_TH ≤ 2.5 V | 7 | ||
| Synchronization pulse ON and OFF time | VCLKIN_T | 20 | ns | VCLKIN_TH > 2.5 V | 7 | ||
| Thermal shutdown temperature | TSHDWN | 165 | °C | 7 | |||
| Thermal shutdown hysteresis | THYS | 30 | °C | 7 | |||
| Thermal resistance junction ambient | RthJA | 65 | °C/W | device soldered on the STMicroelectronics 2Layer 2-Oz Cu demonstration board | 5 | ||
| High-side RDSON | RDSON_HS | 0.175 | Ω | 6 | |||
| Low-side RDSON | RDSON_LS | 0.125 | Ω | 6 | |||
| Minimum OFF time | TOFF_MIN | 185 | ns | 6 | |||
| Minimum ON time | TON_MIN | 85 | ns | 6 | |||
| Wakeup threshold | VWAKE_UP | 0.7 | V | Rising | 6 | ||
| Wakeup threshold | VWAKE_UP | 0.2 | V | Falling | 6 | ||
| Enable threshold hysteresis | VEN | 0.2 | V | Hysteresis | 6 | ||
| Amplitude of synchronization clock | VCLKIN_TH | 2.3 | V | 7 |
CAD (KiCad official)
- Symbol:
L6981NDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
l6981ndr-etched.step/l6981ndr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6981ndr.step/l6981ndr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (52 pp, sha256
17a8f3f2678e811a, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L6981NDR
**STMicroelectronics** · DC-DC Converters · SO-8
L6981NDR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching node output for the internal power stage. |
| 2 | BOOT | output | Bootstrap capacitor pin; connect 100 nF external capacitor between BOOT and SW to supply high-side gate drive voltage. |
| 3 | VCC | power_in | Analog power supply input; connect ≥1 µF ceramic capacitor to filter voltage reference. |
| 4 | VOUT/FB | input | Feedback input for adjustable versions; use external resistor divider to set output voltage to 0.85 V nominal reference. |
| 5 | EN/CLKIN | input | Enable input; enable rising threshold 1.08-1.32 V (typical 1.2 V), disable falling threshold ~1.0 V; in LNM versions also accepts external clock (200-500 kHz) for synchronization. |
| 6 | AGND | power_in | Analog ground reference. |
| 7 | VIN | power_in | DC input voltage supply; operating range 3.5 V to 38 V. |
| 8 | PGND | power_in | Power ground reference. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Maximum pin voltage | VIN | -0.3 | | 42 | V | | 5 |
| PGND to AGND Maximum pin voltage | PGND to AGND | -0.3 | | 0.3 | V | | 5 |
| VCC Maximum pin voltage | VCC | -0.3 | | | V | | 5 |
| VOUT/FB Maximum pin voltage | VOUT/FB | -0.3 | | 8 | V | | 5 |
| EN Maximum pin voltage | EN | -0.3 | | | V | | 5 |
| SW Maximum pin voltage | SW | -0.85 | | | V | | 5 |
| SW Maximum pin voltage (transient) | SW | -3.9 | | | V | for 0.5 ns | 5 |
| High-side / Low-side RMS switch current | IHS, ILS | | | 1.5 | A | RMS switch current | 5 |
| Operating temperature range (junction) | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 5 |
| Lead temperature | TLEAD | | | 260 | °C | soldering 10 sec. | 5 |
| Operating input voltage range | VIN | 3.5 | | 38 | V | | 6 |
| VCC rising threshold | VINH | 2.3 | | 3.3 | V | | 6 |
| VCC UVLO falling threshold | VINL | 2.15 | | 3.15 | V | | 6 |
| Peak current limit | IPK | 2 | | 2.3 | A | No slope contribution | 6 |
| Peak current limit | IPK | 1.55 | | 1.8 | A | Full slope contribution | 6 |
| Valley current limit | IVY | 1.7 | 2 | 2.3 | A | | 6 |
| Reverse current limit | IVY_SINK | 1.25 | 1.5 | 1.75 | A | LNM or VOUT overvoltage | 6 |
| Switching frequency | FSW | 360 | 400 | 440 | KHz | | 6 |
| Shutdown current from VIN | ISHTDWN | 2 | | 3 | μA | EN = GND | 6 |
| Quiescent current from VIN (LNM device) | IQ_VIN | 1.6 | 2.3 | 3 | mA | ADJ part number | 6 |
| VCC LDO output voltage | VCC | 3 | 3.3 | 3.6 | V | | 6 |
| Enable threshold | VEN | 1.08 | 1.2 | 1.32 | V | Rising | 6 |
| Internal soft-start | TSS | 1 | 1.3 | 1.6 | ms | | 6 |
| Voltage feedback (adjustable version) | VFB | 0.845 | 0.85 | 0.855 | V | Adjustable version TJ = 25 °C | 6 |
| Voltage feedback (adjustable version) | VFB | 0.842 | 0.85 | 0.858 | V | Adjustable version TJ = -40 °C ≤ TJ ≤ 125 °C | 6 |
| Overvoltage trip (VOVP/VREF) | VOVP | 115 | 120 | 125 | % | | 7 |
| Overvoltage hysteresis | VOVP_HYST | 1 | 2 | 6 | % | | 7 |
| Synchronization range | fCLKIN | 200 | | 500 | KHz | LNM versions only | 7 |
| Synchronization pulse ON and OFF time | VCLKIN_T | | 60 | | ns | 2.3 ≤ VCLKIN_TH ≤ 2.5 V | 7 |
| Synchronization pulse ON and OFF time | VCLKIN_T | | 20 | | ns | VCLKIN_TH > 2.5 V | 7 |
| Thermal shutdown temperature | TSHDWN | | 165 | | °C | | 7 |
| Thermal shutdown hysteresis | THYS | | 30 | | °C | | 7 |
| Thermal resistance junction ambient | RthJA | | 65 | | °C/W | device soldered on the STMicroelectronics 2Layer 2-Oz Cu demonstration board | 5 |
| High-side RDSON | RDSON_HS | | 0.175 | | Ω | | 6 |
| Low-side RDSON | RDSON_LS | | 0.125 | | Ω | | 6 |
| Minimum OFF time | TOFF_MIN | | 185 | | ns | | 6 |
| Minimum ON time | TON_MIN | | 85 | | ns | | 6 |
| Wakeup threshold | VWAKE_UP | | 0.7 | | V | Rising | 6 |
| Wakeup threshold | VWAKE_UP | | 0.2 | | V | Falling | 6 |
| Enable threshold hysteresis | VEN | | 0.2 | | V | Hysteresis | 6 |
| Amplitude of synchronization clock | VCLKIN_TH | | 2.3 | | V | | 7 |
## CAD (KiCad official)
- Symbol: `L6981NDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `l6981ndr-etched.step` / `l6981ndr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6981ndr.step` / `l6981ndr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590902759300952064) (52 pp, sha256 `17a8f3f2678e811a`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l6981ndr-datasheet.pdf)