main
Ray
l6981n33dr: specified limits as data (metadata.characteristics, 27 rows from the datasheet)
f018af5
L6981N33DR
STMicroelectronics · DC-DC Converters · SO-8
L6981N33DR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching node that drives the external LC output filter; oscillates between near-VIN and near-GND at 360 to 440 KHz switching frequency. |
| 2 | BOOT | passive | Bootstrap capacitor connection; connect 100 nF capacitor between BOOT and SW to supply gate drive charge to internal high-side NMOS. |
| 3 | VCC | power_in | Power supply for internal analog circuitry; connect ceramic capacitor (≥ 1 µF) to AGND for filtering; regulated to 3.0 to 3.6 V. |
| 4 | VOUT/FB | output | Output voltage sensing pin; for N33DR variant this is VOUT with internal voltage divider set to 3.3 V fixed output. |
| 5 | EN/CLKIN | input | Enable control pin with rising threshold 1.08 to 1.32 V and falling threshold 1.0 V; also accepts external clock input (200 to 500 KHz) for synchronization in LNM mode. |
| 6 | AGND | power_in | Analog ground reference for internal signal processing and voltage sensing circuits. |
| 7 | VIN | power_in | DC input voltage pin with operating range 3.5 to 38 V; supplies power to internal switches and analog circuits. |
| 8 | PGND | power_in | Power ground connection for output power stage and switching circuits. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage range | VIN | 3.5 | 38 | V | 6 | ||
| VCC rising threshold | VINH | 2.3 | 3.3 | V | 6 | ||
| VCC UVLO falling threshold | VINL | 2.15 | 3.15 | V | 6 | ||
| Peak current limit | IPK | 2 | 2.3 | A | No slope contribution | 6 | |
| Peak current limit | IPK | 1.55 | 1.8 | A | Full slope contribution | 6 | |
| Valley current limit | IVY | 1.7 | 2 | 2.3 | A | 6 | |
| Reverse current limit | IVY_SINK | 1.25 | 1.5 | 1.75 | A | LNM or VOUT overvoltage | 6 |
| Switching frequency | FSW | 360 | 400 | 440 | KHz | 6 | |
| EN enable threshold rising | VEN | 1.08 | 1.2 | 1.32 | V | Rising | 6 |
| VCC LDO output voltage | 3 | 3.3 | 3.6 | V | 6 | ||
| Shutdown current from VIN | ISHTDWN | 2 | 3 | μA | EN = GND | 6 | |
| Quiescent current from VIN (LNM device) | IQ_VIN | 300 | 550 | 800 | μA | Fix VOUT part number | 6 |
| Quiescent current from VOUT (LNM device) | IQ_VOUT | 1.3 | 1.8 | 2.3 | mA | Fix VOUT part number | 6 |
| Internal soft-start | TSS | 1 | 1.3 | 1.6 | ms | 6 | |
| Voltage feedback, fixed 3.3 V version | VFB | 3.27 | 3.3 | 3.33 | V | TJ = 25 °C | 6 |
| Voltage feedback, fixed 3.3 V version | VFB | 3.284 | 3.3 | 3.346 | V | TJ = -40 °C ≤ TJ ≤ 125 °C | 7 |
| Overvoltage trip (VOVP/VREF) | VOVP | 115 | 120 | 125 | % | 7 | |
| Overvoltage hysteresis | VOVP_HYST | 1 | 2 | 6 | % | 7 | |
| Synchronization range (LNM only) | fCLKIN | 200 | 500 | KHz | 7 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 42 | V | Maximum pin voltage | 5 | |
| PGND to AGND maximum pin voltage | -0.3 | 0.3 | V | Maximum pin voltage | 5 | ||
| VOUT/FB maximum pin voltage | -0.3 | 8 | V | Maximum pin voltage | 5 | ||
| SW maximum pin voltage | -0.85 | V | Maximum pin voltage; max printed as VIN + 0.3 V | 5 | |||
| SW maximum pin voltage | -3.9 | V | for 0.5 ns; max printed as VIN + 0.3 V | 5 | |||
| Operating temperature range | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 5 | ||
| Thermal resistance junction ambient | RthJA | 65 | °C/W | Device soldered on the STMicroelectronics 2-layer 2-oz Cu demonstration board | 5 |
CAD (KiCad official)
- Symbol:
L6981N33DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
l6981n33dr-etched.step/l6981n33dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6981n33dr.step/l6981n33dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (52 pp, sha256
ffbb8bf9e87b0957, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L6981N33DR
**STMicroelectronics** · DC-DC Converters · SO-8
L6981N33DR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switching node that drives the external LC output filter; oscillates between near-VIN and near-GND at 360 to 440 KHz switching frequency. |
| 2 | BOOT | passive | Bootstrap capacitor connection; connect 100 nF capacitor between BOOT and SW to supply gate drive charge to internal high-side NMOS. |
| 3 | VCC | power_in | Power supply for internal analog circuitry; connect ceramic capacitor (≥ 1 µF) to AGND for filtering; regulated to 3.0 to 3.6 V. |
| 4 | VOUT/FB | output | Output voltage sensing pin; for N33DR variant this is VOUT with internal voltage divider set to 3.3 V fixed output. |
| 5 | EN/CLKIN | input | Enable control pin with rising threshold 1.08 to 1.32 V and falling threshold 1.0 V; also accepts external clock input (200 to 500 KHz) for synchronization in LNM mode. |
| 6 | AGND | power_in | Analog ground reference for internal signal processing and voltage sensing circuits. |
| 7 | VIN | power_in | DC input voltage pin with operating range 3.5 to 38 V; supplies power to internal switches and analog circuits. |
| 8 | PGND | power_in | Power ground connection for output power stage and switching circuits. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage range | VIN | 3.5 | | 38 | V | | 6 |
| VCC rising threshold | VINH | 2.3 | | 3.3 | V | | 6 |
| VCC UVLO falling threshold | VINL | 2.15 | | 3.15 | V | | 6 |
| Peak current limit | IPK | 2 | | 2.3 | A | No slope contribution | 6 |
| Peak current limit | IPK | 1.55 | | 1.8 | A | Full slope contribution | 6 |
| Valley current limit | IVY | 1.7 | 2 | 2.3 | A | | 6 |
| Reverse current limit | IVY_SINK | 1.25 | 1.5 | 1.75 | A | LNM or VOUT overvoltage | 6 |
| Switching frequency | FSW | 360 | 400 | 440 | KHz | | 6 |
| EN enable threshold rising | VEN | 1.08 | 1.2 | 1.32 | V | Rising | 6 |
| VCC LDO output voltage | | 3 | 3.3 | 3.6 | V | | 6 |
| Shutdown current from VIN | ISHTDWN | 2 | | 3 | μA | EN = GND | 6 |
| Quiescent current from VIN (LNM device) | IQ_VIN | 300 | 550 | 800 | μA | Fix VOUT part number | 6 |
| Quiescent current from VOUT (LNM device) | IQ_VOUT | 1.3 | 1.8 | 2.3 | mA | Fix VOUT part number | 6 |
| Internal soft-start | TSS | 1 | 1.3 | 1.6 | ms | | 6 |
| Voltage feedback, fixed 3.3 V version | VFB | 3.27 | 3.3 | 3.33 | V | TJ = 25 °C | 6 |
| Voltage feedback, fixed 3.3 V version | VFB | 3.284 | 3.3 | 3.346 | V | TJ = -40 °C ≤ TJ ≤ 125 °C | 7 |
| Overvoltage trip (VOVP/VREF) | VOVP | 115 | 120 | 125 | % | | 7 |
| Overvoltage hysteresis | VOVP_HYST | 1 | 2 | 6 | % | | 7 |
| Synchronization range (LNM only) | fCLKIN | 200 | 500 | | KHz | | 7 |
| Input voltage (absolute maximum) | VIN | -0.3 | | 42 | V | Maximum pin voltage | 5 |
| PGND to AGND maximum pin voltage | | -0.3 | | 0.3 | V | Maximum pin voltage | 5 |
| VOUT/FB maximum pin voltage | | -0.3 | | 8 | V | Maximum pin voltage | 5 |
| SW maximum pin voltage | | -0.85 | | | V | Maximum pin voltage; max printed as VIN + 0.3 V | 5 |
| SW maximum pin voltage | | -3.9 | | | V | for 0.5 ns; max printed as VIN + 0.3 V | 5 |
| Operating temperature range | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 5 |
| Thermal resistance junction ambient | RthJA | | 65 | | °C/W | Device soldered on the STMicroelectronics 2-layer 2-oz Cu demonstration board | 5 |
## CAD (KiCad official)
- Symbol: `L6981N33DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `l6981n33dr-etched.step` / `l6981n33dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6981n33dr.step` / `l6981n33dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590908953486442496) (52 pp, sha256 `ffbb8bf9e87b0957`, retrieved 2026-09-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l6981n33dr-datasheet.pdf)