main
Ray l6902d013tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 6c318d5
{
  "slug": "l6902d013tr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics DC-DC Converters, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "l6902d013tr"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "l6902d013tr.kicad_sym",
    "l6902d013tr.kicad_mod",
    "l6902d013tr.glb",
    "l6902d013tr.step",
    "l6902d013tr.lbr",
    "docs/hero.png",
    "docs/l6902d013tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "l6902d013tr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "L6902D013TR",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "DC-DC Converters",
    "datasheet": "https://www.st.com/resource/en/datasheet/l6902d013tr.pdf",
    "parts": {
      "symbol": "l6902d013tr.kicad_sym",
      "footprint": "l6902d013tr.kicad_mod",
      "model_3d": "l6902d013tr-etched.glb",
      "model_3d_plain": "l6902d013tr.glb",
      "model_3d_step": "l6902d013tr-etched.step",
      "model_3d_step_plain": "l6902d013tr.step",
      "lbr": "l6902d013tr.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "output",
        "description": "Regulator switching output. Drain of the internal P-channel DMOS power switch (typ. 250 mΩ) that drives the external inductor / catch diode of the step-down converter. Delivers up to 1 A continuous output current, internally limited (typ. 2.5 A latched short-circuit limit). Absolute maximum DC rating -1 V to 40 V (-5 V to 40 V peak, t ≤ 0.1 µs)."
      },
      {
        "number": "2",
        "name": "CS+",
        "type": "input",
        "description": "Positive (higher-voltage) input of the on-chip current error amplifier. Connect to the high side of the external current-sense resistor Rsense. Together with CS- programs the output current limit / constant-current setpoint via a ~100 mV internal offset (Voffs typ. 100 mV, ±5%). Absolute maximum -0.3 V to VCC."
      },
      {
        "number": "3",
        "name": "CS-",
        "type": "input",
        "description": "Negative (lower-voltage) input of the on-chip current error amplifier. Connect to the low side of the external current-sense resistor Rsense. Compatible with both VCC-referenced and GND-referenced sensing schemes, enabling accurate (±5%) programmable current limiting. Absolute maximum -0.3 V to VCC."
      },
      {
        "number": "4",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal voltage / current error amplifier, used for external loop frequency compensation. Connect an R-C compensation network from this pin to GND to set the control-loop bandwidth and phase margin. VOH ≈ 3.6 V (VFB = 1 V), VOL ≈ 0.4 V (VFB = 1.5 V); source ≈ 200 µA, sink ≈ 1 mA. Absolute maximum 4 V."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Step-down voltage-feedback input to the internal voltage error amplifier. Tie directly to VOUT for a 1.235 V (±2%) regulated output, or drive from an external R1/R2 divider to program higher outputs up to 34 V: VOUT = 1.235 V × (1 + R1/R2). Absolute maximum 4 V."
      },
      {
        "number": "6",
        "name": "VREF",
        "type": "power_out",
        "description": "Buffered 3.3 V (±2%) reference output. Can source up to ~5 mA of external load current (short-circuit current typ. 10 mA); line regulation 5 mV typ. over VCC = 8 V to 36 V, load regulation 8 mV typ. No output capacitor is required for stability."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / signal and power return. Ground reference for the reference, error amplifiers, oscillator, and control logic."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Unregulated DC supply input. Operating range 8 V to 36 V (absolute maximum 40 V). Powers the internal control circuitry and the source of the integrated P-channel DMOS power switch. Bypass with a low-ESR capacitor close to the pin. Typical total operating quiescent current ~3 mA."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C500664",
      "digikey": "497-5330-2-ND",
      "mouser": "511-L6902D013TR"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:02:27Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "497-5330-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-L6902D013TR",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "l6902d013tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "l6902d013tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6f35add4a885a541bc56fe179d269a26d487067f30065fd0470f87df92fd072c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}