main
Ray
Publish 0.1.1
2939f25
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251
{
"schema_version": 1,
"type": "component",
"slug": "l6566btr",
"title": "L6566BTR",
"brief": "STMicroelectronics AC-DC Controllers And Regulators, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power management (pmic)",
"l6566btr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "L6566BTR",
"manufacturer": "STMicroelectronics",
"package": "SO-16",
"pin_count": 16,
"category": "Power Management (PMIC)",
"subcategory": "AC-DC Controllers And Regulators",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586194446882902016",
"parts": {
"symbol": "l6566btr.kicad_sym",
"footprint": "l6566btr.kicad_mod",
"model_3d": "l6566btr-hero.glb",
"model_3d_plain": "l6566btr.glb",
"model_3d_step": "l6566btr-etched.step",
"model_3d_step_plain": "l6566btr.step",
"lbr": "l6566btr.lbr"
},
"distributor_links": {
"lcsc": "C157453",
"digikey": "497-6297-2-ND",
"mouser": "511-L6566BTR"
},
"distributor_check": {
"checked_at": "2026-10-03T02:41:24Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-6297-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "511-L6566BTR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "HVS",
"type": "input",
"description": "High-voltage start-up input withstanding up to 700 V; internal 1 mA current source charges Vcc capacitor until IC turn-on threshold (13-15 V) is reached."
},
{
"number": "2",
"name": "N.C.",
"type": "unconnected",
"description": "Not internally connected; provision for PCB clearance to meet safety requirements."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground reference for signal and gate driver current return; must use separate PCB path from pulsed currents to avoid noise coupling."
},
{
"number": "4",
"name": "GD",
"type": "output",
"description": "Gate driver output; totem pole stage with 800 mA peak source/sink current capability for driving MOSFET and IGBT gates."
},
{
"number": "5",
"name": "Vcc",
"type": "power_in",
"description": "Supply voltage input with operating range 10.6 to 23 V after turn-on; IC disabled below adaptive UVLO threshold which reduces at light load."
},
{
"number": "6",
"name": "FMOD",
"type": "output",
"description": "Frequency modulation output generating symmetrical triangular waveform via internal current sources charging external capacitor; connect resistor to OSC pin for spread-spectrum EMI reduction."
},
{
"number": "7",
"name": "CS",
"type": "input",
"description": "Current sense input to PWM comparator with 150 ns minimum blanking time; 1.5 V second threshold triggers latched shutdown for transformer saturation or secondary diode short-circuit detection."
},
{
"number": "8",
"name": "DIS",
"type": "input",
"description": "Latched disable input; voltage exceeding 4.5 V latches IC off reducing consumption; latch clears when Vcc falls below UVLO or AC_OK pulled low."
},
{
"number": "9",
"name": "COMP",
"type": "input",
"description": "Feedback control input for loop regulation via phototransistor emitter current; operating range 2.5 to 5 V with internal 2 V bottom clamp; voltage below 1.4 V shuts down IC."
},
{
"number": "10",
"name": "VREF",
"type": "power_in",
"description": "Accurate 5 V ± 2% internal voltage reference output supplying few mA to external circuits; IC latches off upon reference failure or drift detection."
},
{
"number": "11",
"name": "ZCD",
"type": "input",
"description": "Zero current detector and overvoltage protection input from auxiliary winding; negative-going edge triggers MOSFET turn-on in QR mode; voltage above 5 V activates OVP shutdown."
},
{
"number": "12",
"name": "MODE/SC",
"type": "input",
"description": "Operating mode selection input; tie to VREF for quasi-resonant mode (oscillator sets maximum frequency) or leave open for fixed-frequency mode (70% maximum duty cycle); delivers slope compensation ramp."
},
{
"number": "13",
"name": "OSC",
"type": "output",
"description": "Oscillator frequency setting; internal 1 V voltage source with resistor to GND defining oscillator current; sets maximum frequency in QR mode or actual frequency in FF mode."
},
{
"number": "14",
"name": "SS",
"type": "input",
"description": "Soft-start capacitor input charging from internal current source; progressive duty-cycle ramp during startup; also delays latched shutdown upon overload protection triggering."
},
{
"number": "15",
"name": "VFF",
"type": "input",
"description": "Line voltage feedforward input with linear range 0 to 3 V modulating pulse-by-pulse current limit setpoint inversely; voltage above 3 V stops switching."
},
{
"number": "16",
"name": "AC_OK",
"type": "input",
"description": "Brownout protection input with 0.45 V threshold; below threshold shuts down IC and clears latched protections; above threshold re-enables operation with internal 15 µA hysteresis current."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 12,
"cost_usd": 0.1315,
"at": "2026-10-03T02:40:46"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586194446882902016",
"pages": 51,
"sha256": "f4985aaaeab61abc",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "l6566btr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "37023123790cc9a5fcfe19d129b47207e102003e57e3283ef7ef26cb1e7018ab",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "SO-16",
"Category": "Power Management (PMIC)",
"Pins": "16"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"l6566btr"
],
"discovery_pitch": "L6566BTR (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l6566btr.kicad_sym",
"l6566btr.kicad_mod",
"l6566btr.glb",
"l6566btr.step",
"l6566btr.lbr",
"docs/hero.png",
"docs/l6566btr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"l6566btr-hero.glb",
"l6566btr-hero.overlay.json",
"l6566btr-etched.step"
],
"visibility": "public",
"description": "STMicroelectronics AC-DC Controllers And Regulators, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}