← Commit history

l6564tdtr: factory component page (tier=mfr)

Ray ·d54d00fd9d · ·parent 834b359
1 file changed +134−8
page.json+134−8
@@ -1,13 +1,144 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "l6564tdtr",+  "title": "L6564TDTR",+  "brief": "STMicroelectronics AC-DC Controllers and Regulators, SSOP-10-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "STMicroelectronics AC-DC Controllers and Regulators, SSOP-10-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "l6564tdtr"   ],+  "component": {+    "mpn": "L6564TDTR",+    "manufacturer": "STMicroelectronics",+    "package": "SSOP-10-150mil",+    "pin_count": 10,+    "category": "PMIC",+    "subcategory": "AC-DC Controllers and Regulators",+    "datasheet": "https://www.st.com/resource/en/datasheet/l6564tdtr.pdf",+    "parts": {+      "symbol": "l6564tdtr.kicad_sym",+      "footprint": "l6564tdtr.kicad_mod",+      "model_3d": "l6564tdtr.glb",+      "model_3d_step": "l6564tdtr.step",+      "lbr": "l6564tdtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "INV",+        "type": "input",+        "description": "Inverting input of the internal error amplifier. Output voltage of the PFC pre-regulator is fed into this pin through a resistor divider. High-impedance input; internal reference is 2.5 V (typ)."+      },+      {+        "number": "2",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output. A compensation network between this pin and INV sets the voltage loop stability. Gate driver is inhibited (burst-mode) when VCOMP falls below ~2.4 V."+      },+      {+        "number": "3",+        "name": "MULT",+        "type": "input",+        "description": "Main input to the multiplier. Connected to the rectified mains voltage via a resistor divider to provide the sinusoidal reference for the current loop and to derive RMS mains information. Linear range 0-3 V; internal clamp ~9.5 V."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "input",+        "description": "PWM comparator current-sense input. MOSFET current is sensed through a shunt and applied here; compared to an internal reference to terminate the on-time. A second 1.7 V comparator detects abnormal currents (inductor saturation) and triggers a safety hiccup."+      },+      {+        "number": "5",+        "name": "VFF",+        "type": "input",+        "description": "Voltage feedforward input to the multiplier for the 1/V^2 function. A capacitor and parallel resistor (100 k\u03a9 min to 2 M\u03a9 max) from this pin to GND complete the peak-holding circuit that derives RMS mains information. Also feeds the brownout comparator: <0.8 V shuts down the IC (not latched); restart above 0.88 V."+      },+      {+        "number": "6",+        "name": "PFC_OK",+        "type": "input",+        "description": "PFC pre-regulator output-voltage monitoring / disable input. Senses PFC output through a resistor divider. Above 2.5 V the IC stops switching (OVP); if simultaneously VINV<1.66 V a feedback failure is latched off. Below 0.23 V the IC is shut down; restart above 0.27 V (usable as remote on/off)."+      },+      {+        "number": "7",+        "name": "ZCD",+        "type": "input",+        "description": "Boost-inductor demagnetization sensing input for transition-mode operation. A negative-going edge triggers MOSFET turn-on. Max ZCD current -10 mA (source) / 10 mA (sink)."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground. Common current return for both the signal part of the IC and the gate driver."+      },+      {+        "number": "9",+        "name": "GD",+        "type": "output",+        "description": "Gate driver output. Totem-pole stage capable of 600 mA source / 800 mA sink for MOSFET or IGBT drive. High-level clamped at ~12 V to prevent excessive gate voltages; active pull-down during UVLO."+      },+      {+        "number": "10",+        "name": "Vcc",+        "type": "power_in",+        "description": "Supply voltage for both the signal part of the IC and the gate driver. Operating range 10.3-22.5 V after turn-on; turn-on threshold ~12 V, turn-off ~9.5 V, internal Zener clamp ~25 V. A ~0.1 \u00b5F bypass to GND is recommended."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/l6564tdtr.pdf",+        "pages": 33,+        "sha256": "d9194e06a2a0df36",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 10,+        "described": 10,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "SSOP-10-150mil",+      "Category": "PMIC",+      "Pins": "10"+    }+  },+  "variants": [+    {+      "mpn": "L6564TDTR",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "l6564tdtr"+  ],+  "discovery_pitch": "L6564TDTR (STMicroelectronics) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +156,5 @@     "docs/l6564tdtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file