← Commit history

Initial commit: component/l6564tdtr

Ray ·472502fb86 ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# L6564TDTR++**STMicroelectronics** · AC-DC Controllers and Regulators · SSOP-10-150mil++L6564TDTR from STMicroelectronics, in a SSOP-10-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INV | input | Inverting input of the internal error amplifier. Output voltage of the PFC pre-regulator is fed into this pin through a resistor divider. High-impedance input; internal reference is 2.5 V (typ). |+| 2 | COMP | output | Error amplifier output. A compensation network between this pin and INV sets the voltage loop stability. Gate driver is inhibited (burst-mode) when VCOMP falls below ~2.4 V. |+| 3 | MULT | input | Main input to the multiplier. Connected to the rectified mains voltage via a resistor divider to provide the sinusoidal reference for the current loop and to derive RMS mains information. Linear range 0-3 V; internal clamp ~9.5 V. |+| 4 | CS | input | PWM comparator current-sense input. MOSFET current is sensed through a shunt and applied here; compared to an internal reference to terminate the on-time. A second 1.7 V comparator detects abnormal currents (inductor saturation) and triggers a safety hiccup. |+| 5 | VFF | input | Voltage feedforward input to the multiplier for the 1/V^2 function. A capacitor and parallel resistor (100 kΩ min to 2 MΩ max) from this pin to GND complete the peak-holding circuit that derives RMS mains information. Also feeds the brownout comparator: <0.8 V shuts down the IC (not latched); restart above 0.88 V. |+| 6 | PFC_OK | input | PFC pre-regulator output-voltage monitoring / disable input. Senses PFC output through a resistor divider. Above 2.5 V the IC stops switching (OVP); if simultaneously VINV<1.66 V a feedback failure is latched off. Below 0.23 V the IC is shut down; restart above 0.27 V (usable as remote on/off). |+| 7 | ZCD | input | Boost-inductor demagnetization sensing input for transition-mode operation. A negative-going edge triggers MOSFET turn-on. Max ZCD current -10 mA (source) / 10 mA (sink). |+| 8 | GND | power_in | Ground. Common current return for both the signal part of the IC and the gate driver. |+| 9 | GD | output | Gate driver output. Totem-pole stage capable of 600 mA source / 800 mA sink for MOSFET or IGBT drive. High-level clamped at ~12 V to prevent excessive gate voltages; active pull-down during UVLO. |+| 10 | Vcc | power_in | Supply voltage for both the signal part of the IC and the gate driver. Operating range 10.3-22.5 V after turn-on; turn-on threshold ~12 V, turn-off ~9.5 V, internal Zener clamp ~25 V. A ~0.1 µF bypass to GND is recommended. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SSOP-10-150mil |+| Category | PMIC |+| Pins | 10 |++## Ordering variants++Same part, different packaging or reel option.++- `L6564TDTR`++## CAD (KiCad official)++- Symbol: `L6564TDTR`+- Footprint: `Package_SO:SSOP-10_3.9x4.9mm_P1.00mm`+- 3D model: SSOP-10-150mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/l6564tdtr.pdf) (33 pp, sha256 `d9194e06a2a0df36`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6564tdtr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "l6564tdtr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics AC-DC Controllers and Regulators, SSOP-10-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "l6564tdtr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l6564tdtr.kicad_sym",+    "l6564tdtr.kicad_mod",+    "l6564tdtr.glb",+    "l6564tdtr.step",+    "l6564tdtr.lbr",+    "docs/hero.png",+    "docs/l6564tdtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file