component
L6562D
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers And Regulators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL6562D
STMicroelectronics · AC-DC Controllers And Regulators · SO-8
L6562D from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INV | input | Inverting input of the error amplifier, receiving the PFC output voltage through a resistor divider, with the feedback threshold at 2.5 V (2.465 V to 2.535 V at Tj = 25 °C). |
| 2 | COMP | output | Error amplifier output, with a compensation network connected between this pin and INV (pin 1) to ensure voltage-loop stability, high power factor and low THD. |
| 3 | MULT | input | Main multiplier input, connected to the rectified mains voltage through a resistor divider to provide the sinusoidal current-loop reference, with a linear operating range of 0 to 3 V. |
| 4 | CS | input | Input to the PWM comparator that senses MOSFET current through a resistor and compares it with the multiplier's sinusoidal reference to determine MOSFET turn-off, with a delay to output of 200 to 350 ns. |
| 5 | ZCD | input | Boost inductor demagnetization sensing input for transition-mode operation, where a negative-going edge triggers MOSFET turn-on (triggering voltage 1.6 V, arming voltage 2.1 V on the positive-going edge). |
| 6 | GND | power_in | Ground, serving as the current return for both the signal part of the IC and the gate driver. |
| 7 | GD | output | Totem-pole gate driver output for power MOSFETs and IGBTs, rated 600 mA source and 800 mA sink peak current, with the high-level voltage clamped at about 12 V. |
| 8 | Vcc | power_in | Supply voltage for both the signal part of the IC and the gate driver, with an upper limit extended to 22 V minimum; turn-on threshold is 11 to 13 V and turn-off threshold is 8.7 to 10.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
L6562D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
l6562d-etched.step/l6562d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6562d.step/l6562d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (16 pp, sha256
015ac73cbd46a605, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).