← Commit history

Set visibility: public

Ray ·697dd4a2f8 · ·parent 97afd91
1 file changed +10−7
page.json+10−7
@@ -32,25 +32,25 @@         "number": "1",         "name": "INV",         "type": "input",-        "description": "Inverting input of the error amplifier. A resistive divider from the regulated output voltage connects to this pin to provide voltage feedback. Internal reference is 2.5V (\u00b11% at Tj=25\u00b0C); input bias current typ. -0.1\u00b5A."+        "description": "Inverting input of the error amplifier. A resistive divider from the regulated output voltage connects to this pin to provide voltage feedback. Internal reference is 2.5V (±1% at Tj=25°C); input bias current typ. -0.1µA."       },       {         "number": "2",         "name": "COMP",         "type": "output",-        "description": "Output of the error amplifier. A feedback compensation network is placed between this pin and INV (pin 1). Upper clamp ~5.8V, lower clamp ~2.25V; source current typ. -4mA, sink typ. 4.5mA. Also carries the OVP triggering current (typ. 40\u00b5A)."+        "description": "Output of the error amplifier. A feedback compensation network is placed between this pin and INV (pin 1). Upper clamp ~5.8V, lower clamp ~2.25V; source current typ. -4mA, sink typ. 4.5mA. Also carries the OVP triggering current (typ. 40µA)."       },       {         "number": "3",         "name": "MULT",         "type": "input",-        "description": "Input of the multiplier stage. A resistive divider from the rectified mains connects to this pin, producing a voltage proportional to the rectified mains. Linear operating range 0 to 3V (typ. to 3.5V); multiplier gain K \u2248 0.6 1/V."+        "description": "Input of the multiplier stage. A resistive divider from the rectified mains connects to this pin, producing a voltage proportional to the rectified mains. Linear operating range 0 to 3V (typ. to 3.5V); multiplier gain K ≈ 0.6 1/V."       },       {         "number": "4",         "name": "CS",         "type": "input",-        "description": "Current sense input to the PWM comparator. Inductor current is sensed by an external resistor whose voltage is applied here. Internal reference clamp ~1.7V; input bias typ. -0.05\u00b5A; delay to output typ. 200ns. Absolute max -0.3 to 7V."+        "description": "Current sense input to the PWM comparator. Inductor current is sensed by an external resistor whose voltage is applied here. Internal reference clamp ~1.7V; input bias typ. -0.05µA; delay to output typ. 200ns. Absolute max -0.3 to 7V."       },       {         "number": "5",@@ -68,13 +68,13 @@         "number": "7",         "name": "GD",         "type": "output",-        "description": "Gate driver output. Push-pull totem-pole output capable of driving a Power MOSFET or IGBT with \u00b1400mA peak (\u00b1700mA for 2\u00b5s abs. max). Rise/fall time typ. 40ns into 1nF load. Output actively pulled low (typ. 10mA) when VCC < UVLO."+        "description": "Gate driver output. Push-pull totem-pole output capable of driving a Power MOSFET or IGBT with ±400mA peak (±700mA for 2µs abs. max). Rise/fall time typ. 40ns into 1nF load. Output actively pulled low (typ. 10mA) when VCC < UVLO."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage for driver and control circuits. Operating range 11V to 18V (after turn-on); turn-on threshold typ. 12V, turn-off typ. 9.5V (hysteresis ~2.5V). Start-up current typ. 50\u00b5A, quiescent typ. 2.6mA, operating typ. 4mA. Internal 20V zener clamp; abs. max supply current 30mA."+        "description": "Supply voltage for driver and control circuits. Operating range 11V to 18V (after turn-on); turn-on threshold typ. 12V, turn-off typ. 9.5V (hysteresis ~2.5V). Start-up current typ. 50µA, quiescent typ. 2.6mA, operating typ. 4mA. Internal 20V zener clamp; abs. max supply current 30mA."       }     ],     "provenance": {@@ -138,5 +138,8 @@     "docs/l6561d013tr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file