component
L6561D013TR
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownL6561D013TR
STMicroelectronics · AC-DC Controllers and Regulators · SOIC-8
L6561D013TR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INV | input | Inverting input of the error amplifier. A resistive divider from the regulated output voltage connects to this pin to provide voltage feedback. Internal reference is 2.5V (±1% at Tj=25°C); input bias current typ. -0.1µA. |
| 2 | COMP | output | Output of the error amplifier. A feedback compensation network is placed between this pin and INV (pin 1). Upper clamp ~5.8V, lower clamp ~2.25V; source current typ. -4mA, sink typ. 4.5mA. Also carries the OVP triggering current (typ. 40µA). |
| 3 | MULT | input | Input of the multiplier stage. A resistive divider from the rectified mains connects to this pin, producing a voltage proportional to the rectified mains. Linear operating range 0 to 3V (typ. to 3.5V); multiplier gain K ≈ 0.6 1/V. |
| 4 | CS | input | Current sense input to the PWM comparator. Inductor current is sensed by an external resistor whose voltage is applied here. Internal reference clamp ~1.7V; input bias typ. -0.05µA; delay to output typ. 200ns. Absolute max -0.3 to 7V. |
| 5 | ZCD | input | Zero current detection input. Sensed from an auxiliary transformer winding to detect boost inductor demagnetization. Rising threshold typ. 2.1V, hysteresis typ. 0.5V. Grounding this pin (V < ~200mV disable threshold) disables the device. Upper clamp ~5.1V, lower clamp ~0.65V; abs. max 50mA source / -10mA sink. |
| 6 | GND | power_in | Ground reference / current return for driver and control circuits. |
| 7 | GD | output | Gate driver output. Push-pull totem-pole output capable of driving a Power MOSFET or IGBT with ±400mA peak (±700mA for 2µs abs. max). Rise/fall time typ. 40ns into 1nF load. Output actively pulled low (typ. 10mA) when VCC < UVLO. |
| 8 | VCC | power_in | Supply voltage for driver and control circuits. Operating range 11V to 18V (after turn-on); turn-on threshold typ. 12V, turn-off typ. 9.5V (hysteresis ~2.5V). Start-up current typ. 50µA, quiescent typ. 2.6mA, operating typ. 4mA. Internal 20V zener clamp; abs. max supply current 30mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
L6561D013TRL6561D013TRD
CAD (KiCad official)
- Symbol:
L6561D013TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
l6561d013tr-etched.step/l6561d013tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6561d013tr.step/l6561d013tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
2be94714d796d4fb, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).