component
L6470HTR
Public Made by Adomby adom
STMicroelectronics Stepper Motor Driver, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -56,7 +56,7 @@ "number": "4", "name": "SW", "type": "input",- "description": "External switch input pin with internal 60-110 k\u03a9 pull-up resistor for user-defined interrupt control; must be connected to VDD if not used."+ "description": "External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used." }, { "number": "5",@@ -68,7 +68,7 @@ "number": "6", "name": "VREG", "type": "power_in",- "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 \u00b5F bypass capacitor."+ "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor." }, { "number": "7",@@ -86,7 +86,7 @@ "number": "9", "name": "AGND", "type": "power_in",- "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed \u00b10.3 V."+ "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V." }, { "number": "10",@@ -110,7 +110,7 @@ "number": "13", "name": "PGND", "type": "power_in",- "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed \u00b10.3 V."+ "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V." }, { "number": "14",@@ -134,7 +134,7 @@ "number": "17", "name": "VDD", "type": "power_in",- "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 \u00b5F bypass capacitor for proper operation."+ "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation." }, { "number": "18",@@ -158,7 +158,7 @@ "number": "21", "name": "DGND", "type": "power_in",- "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed \u00b10.3 V."+ "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V." }, { "number": "22",@@ -170,7 +170,7 @@ "number": "23", "name": "CS", "type": "input",- "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 k\u03a9 internal pull-up resistance and 350 ns setup time."+ "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time." }, { "number": "24",@@ -194,7 +194,7 @@ "number": "27", "name": "PGND", "type": "power_in",- "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed \u00b10.3 V; duplicate connection for current distribution."+ "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution." }, { "number": "28",@@ -287,5 +287,8 @@ "docs/l6470htr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }