← Commit history

Initial commit: component/l6470htr

Ray ·cef0d14b88 ·
2 files changed +335
README.mdadded+65
@@ -0,0 +1,65 @@+# L6470HTR++**STMicroelectronics** · Stepper Motor Driver · HTSSOP-28++L6470HTR from STMicroelectronics, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT1A | power_out | Full bridge A phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control. |+| 2 | VSA | power_in | Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB. |+| 3 | STBY\RST | input | Active-low standby and reset pin that resets logic and disables charge pump when driven low; must be connected to VDD if not used. |+| 4 | SW | input | External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used. |+| 5 | ADCIN | input | Integrated analog-to-digital converter input pin accepting 0-VREG voltage range with 5-bit resolution sampled at PWM frequency. |+| 6 | VREG | power_in | Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor. |+| 7 | OSCIN | input | Oscillator input pin for connecting external crystal/resonator (8-32 MHz) or direct clock source; leave floating if using internal oscillator. |+| 8 | OSCOUT | output | Oscillator output pin providing 2/4/8/16 MHz clock from internal oscillator or crystal/resonator driving capability with 4 mA maximum output current. |+| 9 | AGND | power_in | Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V. |+| 10 | CP | output | Charge pump oscillator output pin supplying signal for external charge pump circuit with 660-800 kHz oscillation frequency. |+| 11 | VBOOT | power_in | Bootstrap voltage supply pin (maximum 55 V) for high-side gate drivers requiring 1.1-1.4 mA average charging current. |+| 12 | VSB | power_in | Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA. |+| 13 | PGND | power_in | Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V. |+| 14 | OUT1B | power_out | Full bridge B phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control. |+| 15 | OUT2B | power_out | Full bridge B phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control. |+| 16 | VSB | power_in | Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA; duplicate connection for current distribution. |+| 17 | VDD | power_in | Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation. |+| 18 | SDO | output | SPI serial data output pin with 0.3 V maximum low voltage and 2.4 V minimum high voltage at 3.3 V VDD; maximum drive current 4 mA. |+| 19 | CK | input | SPI serial clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) with maximum frequency 5 MHz and 0.8-2 V logic thresholds. |+| 20 | SDI | input | SPI serial data input pin (TTL/CMOS compatible, 3.3-5 V logic levels) sampled on CK rising edges with 25 ns setup and 20 ns hold time. |+| 21 | DGND | power_in | Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V. |+| 22 | BUSY\SYNC | tri_state | Open-drain output pin functioning as busy flag (pulled low during command execution) or synchronization clock signal based on SYNC_EN bit. |+| 23 | CS | input | SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time. |+| 24 | FLAG | tri_state | Open-drain output pin (active low) for alarm condition signaling on overcurrent, thermal shutdown/warning, UVLO, stall detection, switch events, or command errors. |+| 25 | STCK | input | Step-clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) for external pulse counting mode with maximum input frequency 2 MHz. |+| 26 | VSA | power_in | Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB; duplicate connection for current distribution. |+| 27 | PGND | power_in | Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution. |+| 28 | OUT2A | power_out | Full bridge A phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | HTSSOP-28 |+| Category | Motor Driver ICs |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `L6470HTR`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `l6470htr-etched.step` / `l6470htr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6470htr.step` / `l6470htr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416) (73 pp, sha256 `4b94ab59eec71372`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l6470htr-datasheet.pdf)
page.jsonadded+270
@@ -0,0 +1,270 @@+{+  "slug": "l6470htr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Stepper Motor Driver, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "l6470htr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l6470htr.kicad_sym",+    "l6470htr.kicad_mod",+    "l6470htr.glb",+    "l6470htr.step",+    "l6470htr.lbr",+    "docs/hero.png",+    "docs/l6470htr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "L6470HTR",+    "manufacturer": "STMicroelectronics",+    "package": "HTSSOP-28",+    "pin_count": 29,+    "category": "Motor Driver ICs",+    "subcategory": "Stepper Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",+    "parts": {+      "symbol": "l6470htr.kicad_sym",+      "footprint": "l6470htr.kicad_mod",+      "model_3d": "l6470htr-etched.glb",+      "model_3d_plain": "l6470htr.glb",+      "model_3d_step": "l6470htr-etched.step",+      "model_3d_step_plain": "l6470htr.step",+      "lbr": "l6470htr.lbr"+    },+    "distributor_links": {+      "lcsc": "C182381"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT1A",+        "type": "power_out",+        "description": "Full bridge A phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."+      },+      {+        "number": "2",+        "name": "VSA",+        "type": "power_in",+        "description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB."+      },+      {+        "number": "3",+        "name": "STBY\\RST",+        "type": "input",+        "description": "Active-low standby and reset pin that resets logic and disables charge pump when driven low; must be connected to VDD if not used."+      },+      {+        "number": "4",+        "name": "SW",+        "type": "input",+        "description": "External switch input pin with internal 60-110 kΩ pull-up resistor for user-defined interrupt control; must be connected to VDD if not used."+      },+      {+        "number": "5",+        "name": "ADCIN",+        "type": "input",+        "description": "Integrated analog-to-digital converter input pin accepting 0-VREG voltage range with 5-bit resolution sampled at PWM frequency."+      },+      {+        "number": "6",+        "name": "VREG",+        "type": "power_in",+        "description": "Internal 3 V voltage regulator output and external 3.3 V logic supply pin capable of sourcing 40 mA with 50 mV maximum dropout; requires 22-47 µF bypass capacitor."+      },+      {+        "number": "7",+        "name": "OSCIN",+        "type": "input",+        "description": "Oscillator input pin for connecting external crystal/resonator (8-32 MHz) or direct clock source; leave floating if using internal oscillator."+      },+      {+        "number": "8",+        "name": "OSCOUT",+        "type": "output",+        "description": "Oscillator output pin providing 2/4/8/16 MHz clock from internal oscillator or crystal/resonator driving capability with 4 mA maximum output current."+      },+      {+        "number": "9",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference pin internally connected to PGND and DGND; differential voltage between AGND and DGND must not exceed ±0.3 V."+      },+      {+        "number": "10",+        "name": "CP",+        "type": "output",+        "description": "Charge pump oscillator output pin supplying signal for external charge pump circuit with 660-800 kHz oscillation frequency."+      },+      {+        "number": "11",+        "name": "VBOOT",+        "type": "power_in",+        "description": "Bootstrap voltage supply pin (maximum 55 V) for high-side gate drivers requiring 1.1-1.4 mA average charging current."+      },+      {+        "number": "12",+        "name": "VSB",+        "type": "power_in",+        "description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA."+      },+      {+        "number": "13",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V."+      },+      {+        "number": "14",+        "name": "OUT1B",+        "type": "power_out",+        "description": "Full bridge B phase output 1 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."+      },+      {+        "number": "15",+        "name": "OUT2B",+        "type": "power_out",+        "description": "Full bridge B phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."+      },+      {+        "number": "16",+        "name": "VSB",+        "type": "power_in",+        "description": "Full bridge B power supply input pin requiring 8-45 V supply voltage and must be connected to VSA; duplicate connection for current distribution."+      },+      {+        "number": "17",+        "name": "VDD",+        "type": "power_in",+        "description": "Logic power supply voltage (3.3 V or 5 V) for output driver pull-up reference; requires 10 µF bypass capacitor for proper operation."+      },+      {+        "number": "18",+        "name": "SDO",+        "type": "output",+        "description": "SPI serial data output pin with 0.3 V maximum low voltage and 2.4 V minimum high voltage at 3.3 V VDD; maximum drive current 4 mA."+      },+      {+        "number": "19",+        "name": "CK",+        "type": "input",+        "description": "SPI serial clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) with maximum frequency 5 MHz and 0.8-2 V logic thresholds."+      },+      {+        "number": "20",+        "name": "SDI",+        "type": "input",+        "description": "SPI serial data input pin (TTL/CMOS compatible, 3.3-5 V logic levels) sampled on CK rising edges with 25 ns setup and 20 ns hold time."+      },+      {+        "number": "21",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground reference pin for logic circuitry; differential voltage between DGND and AGND must not exceed ±0.3 V."+      },+      {+        "number": "22",+        "name": "BUSY\\SYNC",+        "type": "tri_state",+        "description": "Open-drain output pin functioning as busy flag (pulled low during command execution) or synchronization clock signal based on SYNC_EN bit."+      },+      {+        "number": "23",+        "name": "CS",+        "type": "input",+        "description": "SPI chip select input pin (active low, TTL/CMOS compatible) with 335-565 kΩ internal pull-up resistance and 350 ns setup time."+      },+      {+        "number": "24",+        "name": "FLAG",+        "type": "tri_state",+        "description": "Open-drain output pin (active low) for alarm condition signaling on overcurrent, thermal shutdown/warning, UVLO, stall detection, switch events, or command errors."+      },+      {+        "number": "25",+        "name": "STCK",+        "type": "input",+        "description": "Step-clock input pin (TTL/CMOS compatible, 3.3-5 V logic levels) for external pulse counting mode with maximum input frequency 2 MHz."+      },+      {+        "number": "26",+        "name": "VSA",+        "type": "power_in",+        "description": "Full bridge A power supply input pin requiring 8-45 V supply voltage and must be connected to VSB; duplicate connection for current distribution."+      },+      {+        "number": "27",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground reference pin for motor output stage; differential voltage between PGND and DGND must not exceed ±0.3 V; duplicate connection for current distribution."+      },+      {+        "number": "28",+        "name": "OUT2A",+        "type": "power_out",+        "description": "Full bridge A phase output 2 capable of sourcing or sinking up to 7 A peak current with programmable slew rate control."+      },+      {+        "number": "29",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 29 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 73,+        "cost_usd": 0.6366,+        "at": "2026-09-23T09:42:35"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884110563004416",+        "pages": 73,+        "sha256": "4b94ab59eec71372",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 29,+        "described": 29,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file