L6395D

{
  "slug": "l6395d",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "l6395d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "l6395d.kicad_sym",
    "l6395d.kicad_mod",
    "l6395d.glb",
    "l6395d.step",
    "l6395d.lbr",
    "docs/hero.png",
    "docs/l6395d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "l6395d-hero.glb",
    "l6395d-hero.overlay.json"
  ],
  "component": {
    "mpn": "L6395D",
    "manufacturer": "STMicroelectronics",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589035417022291968",
    "parts": {
      "symbol": "l6395d.kicad_sym",
      "footprint": "l6395d.kicad_mod",
      "model_3d": "l6395d-hero.glb",
      "model_3d_plain": "l6395d.glb",
      "model_3d_step": "l6395d-etched.step",
      "model_3d_step_plain": "l6395d.step",
      "lbr": "l6395d.lbr"
    },
    "distributor_links": {
      "lcsc": "C1549486",
      "digikey": "497-14335-5-ND",
      "mouser": "511-L6395D"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T19:57:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-14335-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-L6395D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LIN",
        "type": "input",
        "description": "Low-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic."
      },
      {
        "number": "2",
        "name": "HIN",
        "type": "input",
        "description": "High-side driver logic input (active high), with CMOS/TTL-compatible thresholds of Vil 0.8 to 1.1 V and Vih 1.9 to 2.25 V and hysteresis, usable down to 3.3 V logic."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Lower section supply voltage, recommended 10 V to 20 V, with absolute maximum rating of -0.3 V to 21 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "LVG",
        "type": "output",
        "description": "Low-side driver output; the circuit guarantees less than 1 V on LVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed, with driver source/sink short-circuit currents of 290 mA and 430 mA (tp < 10 µs)."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_in",
        "description": "High-side (floating) common voltage, with recommended output voltage range of -11 V to 580 V and allowed slew rate of 50 V/ns."
      },
      {
        "number": "7",
        "name": "HVG",
        "type": "output",
        "description": "High-side driver output; the circuit guarantees less than 1 V on HVG at Isink = 10 mA with VCC > 3 V, so an external gate-source bleeder resistor is not needed."
      },
      {
        "number": "8",
        "name": "BOOT",
        "type": "power_in",
        "description": "Bootstrapped supply voltage for the high-side driver, with recommended floating supply voltage (VBOOT - VOUT) of 9.4 V to 20 V and absolute maximum VBOOT of 620 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet classifies OUT as type P (high-side floating common voltage). Mapped to KiCad power_in; The datasheet gives only SO-8 for this MPN (order codes L6395D tube and L6395DTR tape and reel), so "
        ],
        "pages_sent": 16,
        "cost_usd": 0.0516,
        "at": "2026-10-08T19:57:20"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589035417022291968",
        "pages": 16,
        "sha256": "8730b3bddd4951d2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "l6395d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "l6395d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9a15a7ad598ef7f62864a3a2ee6488bfc57f7a7b6b6b58572207924a0648701",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}