main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers l6390dtr: viewers · Ray
l6390dtr-etched.fit.json l6390dtr: one-pass backfill (re-etched) · Ray
l6390dtr-etched.glb l6390dtr: one-pass backfill (re-etched) · Ray
l6390dtr-etched.step l6390dtr: one-pass backfill (re-etched) · Ray
l6390dtr-hero.glb l6390dtr: one-pass backfill (re-etched) · Ray
l6390dtr-hero.overlay.json l6390dtr: one-pass backfill (re-etched) · Ray
l6390dtr.glb Publish 0.1.0 · Ray
l6390dtr.kicad_mod Publish 0.1.0 · Ray
l6390dtr.kicad_sym Publish 0.1.0 · Ray
l6390dtr.lbr Publish 0.1.0 · Ray
l6390dtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/l6390dtr · Ray

L6390DTR

STMicroelectronics · Gate Drivers · SO-16

L6390DTR from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LIN input Low-side gate driver logic input (active low), absolute maximum -0.3 to 15 V
2 SD/OD bidirectional Shutdown logic input (active low) and open drain comparator output, absolute maximum -0.3 to 15 V
3 HIN input High-side gate driver logic input (active high), absolute maximum -0.3 to 15 V
4 VCC power_in Lower section supply voltage, recommended operating 12.5 to 20 V
5 DT input Deadtime setting input pin for external RC network control
6 OP- input Op amp inverting input, absolute maximum -0.3 to VCC+0.3 V
7 OPOUT output Op amp output with voltage swing 0.07 to VCC-4 V
8 GND power_in Ground reference for lower section
9 OP+ input Op amp non-inverting input, absolute maximum -0.3 to VCC+0.3 V
10 CP+ input Comparator input for overcurrent detection, absolute maximum -0.3 to VCC+0.3 V
11 LVG output Low-side gate driver output with 290 mA source and 430 mA sink capability
12 NC unconnected Not connected
13 NC unconnected Not connected
14 OUT power_in High-side floating common reference voltage, absolute maximum VBOOT - 21 to VBOOT + 0.3 V; recommended VOUT up to 580 V DC
15 HVG output High-side gate driver output with 290 mA source and 430 mA sink capability, voltage VOUT - 0.3 to VBOOT + 0.3 V
16 BOOT power_in Bootstrap supply voltage for high-side driver, absolute maximum -0.3 to 620 V

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-16
Category Motor Driver ICs
Pins 16

CAD (KiCad official)

  • Symbol: L6390DTR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16 (KiCad packages3D, STEP)
  • 3D model files: l6390dtr-etched.step / l6390dtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6390dtr.step / l6390dtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (25 pp, sha256 30239da8f263012a, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF