main
History Download
Ray l5973d013tr: specified limits as data (metadata.characteristics, 34 rows from the datasheet) 78428b3

L5973D013TR

STMicroelectronics · DC-DC Converters · SOIC-8

L5973D013TR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulator output; adjustable from 1.235 V to 35 V.
2 SYNC bidirectional Master/slave synchronization pin; operates as master output to 3 V at 3 mA source current or slave input with thresholds of 0.74 V (low) to 2.5 VREF (high).
3 INH input Inhibit control input (active high) to disable the device; must be grounded if unused; internal pull-up present; voltage range -0.3 to VCC.
4 COMP output Error amplifier output for frequency compensation; output range 0.4 V to 3.5 V; maximum analog pin rating 4 V.
5 FB input Feedback input for output voltage setting; direct connection yields 1.235 V output, external resistive divider required for higher voltages; maximum analog pin rating 4 V.
6 VREF power_in 3.3 V reference voltage output (typical 3.3 V, range 3.234 to 3.366 V at 25°C); no decoupling capacitor required for stability.
7 GND power_in Ground reference connection.
8 VCC power_in Unregulated DC input voltage; operating range 4 V to 36 V; absolute maximum 40 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage V8 40 V 4
Output DC voltage V1 -1 40 V 4
Output peak voltage V1 -5 40 V t = 0.1 µs 4
Analog pins V4, V5 4 V 4
INH pin voltage V3 -0.3 V 4
SYNC pin voltage V2 -0.3 4 V 4
Power dissipation PTOT 2.25 W TA ≤ 60 °C 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature range TSTG -55 150 °C 4
Maximum thermal resistance junction-ambient (HSOP8 exposed pad) RthJA 40 °C/W Package mounted on board (footnote 1) 4
Operating input voltage range VCC 4 36 V Vo = 1.235 V; Io = 2 A; (1) spec over TJ -40 to 125 °C 5
Mosfet on resistance RDS(on) 0.25 0.5 Ω (1) spec over TJ -40 to 125 °C 5
Maximum limiting current Il 2.5 3 3.5 A VCC = 4.4 V to 36 V 5
Switching frequency fs 212 250 280 kHz (1) spec over TJ -40 to 125 °C 5
Switching frequency (second printed range) fs 225 250 275 kHz 5
Duty cycle 0 100 % 5
Voltage feedback V5 1.22 1.235 1.25 V 4.4 V < VCC < 36 V; 20 mA < IO < 2 A 5
Voltage feedback (over temperature) V5 1.198 1.235 1.272 V (1) spec over TJ -40 to 125 °C 5
Total operating quiescent current Iqop 3 5 mA (1) spec over TJ -40 to 125 °C 5
Total stand-by quiescent current Iqst-by 50 100 µA Vinh > 2.2 V; (1) spec over TJ -40 to 125 °C 5
Total stand-by quiescent current (VCC = 36 V) Iqst-by 80 150 µA VCC = 36 V; Vinh > 2.2 V; (1) spec over TJ -40 to 125 °C 5
Source output current Io source 200 300 µA VCOMP = 1.9 V; VFB = 1 V 5
Sink output current Io sink 1 1.5 mA VCOMP = 1.9 V; VFB = 1.5 V 5
Source bias current Ib 2.5 4 µA 6
DC open loop gain 50 57 dB RL = ∞ 6
Slave sink current 0.11 0.21 mA Vsync = 0.74 V; (2) guaranteed by design 6
Slave sink current 0.25 0.45 mA Vsync = 2.33 V 6
Master output amplitude 2.75 3 V Isource = 3 mA 6
Output pulse width 0.2 0.35 µs no load; Vsync = 1.65 V 6
Reference voltage 3.234 3.3 3.366 V IREF = 0 to 5 mA; VCC = 4.4 V to 36 V 6
Reference voltage (over temperature) 3.2 3.3 3.399 V (1) spec over TJ -40 to 125 °C; IREF = 0 to 5 mA; VCC = 4.4 V to 36 V 6
Line regulation 5 10 mV IREF = 0 mA; VCC = 4.4 V to 36 V 6
Load regulation 8 15 mV IREF = 0 to 5 mA 6
Short circuit current 10 18 30 mA 6

CAD (KiCad official)

  • Symbol: L5973D013TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: l5973d013tr-etched.step / l5973d013tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l5973d013tr.step / l5973d013tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (17 pp, sha256 667c1ceca07ab8f8, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF