main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs l4986a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers l4986a: viewers · Ray
l4986a-etched.fit.json l4986a: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4986a-etched.glb l4986a: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4986a-etched.step l4986a: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4986a-hero.glb l4986a: hero from the plain model · Ray
l4986a-hero.overlay.json l4986a: hero from the plain model · Ray
l4986a.glb Publish 0.1.0 · Ray
l4986a.kicad_mod Publish 0.1.0 · Ray
l4986a.kicad_sym Publish 0.1.0 · Ray
l4986a.lbr Publish 0.1.0 · Ray
l4986a.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/l4986a · Ray

L4986A

STMicroelectronics · AC-DC Controllers And Regulators · SSOP-10

L4986A from STMicroelectronics, in a SSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage input with recommended operating range -0.3 to 24.5 V (internal clamp at 24.5 V minimum) and maximum supply current 25 mA.
2 GD output Gate driver output capable of 0.7 A source current and 1.5 A sink current (typical values) for driving power MOSFETs and IGBTs.
3 GND power_in IC ground providing current return for both signal/bias circuitry and gate driver current paths.
4 CS input Current sense input with recommended range -10 to 3.3 V and internal overcurrent comparator thresholds at VCS_OCP1 (-0.49 V typ.) and VCS_OCP2 (-0.75 V typ.) with zero current detection at VCS_ZCD (-10 mV typical).
5 PG_OUT output Open drain power good output actively pulled to ground when FB pin voltage exceeds VPGOOD_ON (2.375 V typ.) and set to high impedance when PG_IN is below VPGOOD_OFF (1.25 V typ.).
6 PG_IN input Power good input with recommended range -0.3 to 3.0 V (internal clamp) used to set PGOOD comparator off-threshold at 1.25 V typ. and connected to output voltage divider.
7 FB input Feedback input to error amplifier with recommended range -0.3 to 3.0 V (internal clamp), internal reference VREF = 2.5 V, overshoot protection threshold at 7% above steady state (VFB_S), and burst-mode activation threshold VFB_FF/EBM at 0.5 V typ.
8 COMP output Error amplifier output with recommended range -0.3 to 5.3 V, burst mode shutdown threshold VCOMP_S at 1 V typ., and external disable threshold VCOMP_DIS at 0.7 V typ.
9 NC unconnected High voltage spacer pin that is not internally connected to isolate high voltage section from low voltage circuitry and ensure PCB creepage distance compliance with safety regulations.
10 HV input High voltage startup and AC sensing input rated to withstand 600 V (operating) or 800 V (absolute maximum) with startup threshold VHV_START at 29 V typ., providing AC line sensing and active X-capacitor discharge function.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SSOP-10
Category Power Management (PMIC)
Pins 10

CAD (KiCad official)

  • Symbol: L4986A
  • Footprint: Package_SO:SSOP-10_3.9x4.9mm_P1.00mm
  • 3D model: SSOP-10 (KiCad packages3D, STEP)
  • 3D model files: l4986a-etched.step / l4986a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l4986a.step / l4986a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 0bf483ac06ae30e9, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF