← Commit history

Initial commit: component/l4986a

Ray ·214a6be94d ·
2 files changed +214
README.mdadded+46
@@ -0,0 +1,46 @@+# L4986A++**STMicroelectronics** · AC-DC Controllers And Regulators · SSOP-10++L4986A from STMicroelectronics, in a SSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Supply voltage input with recommended operating range -0.3 to 24.5 V (internal clamp at 24.5 V minimum) and maximum supply current 25 mA. |+| 2 | GD | output | Gate driver output capable of 0.7 A source current and 1.5 A sink current (typical values) for driving power MOSFETs and IGBTs. |+| 3 | GND | power_in | IC ground providing current return for both signal/bias circuitry and gate driver current paths. |+| 4 | CS | input | Current sense input with recommended range -10 to 3.3 V and internal overcurrent comparator thresholds at VCS_OCP1 (-0.49 V typ.) and VCS_OCP2 (-0.75 V typ.) with zero current detection at VCS_ZCD (-10 mV typical). |+| 5 | PG_OUT | output | Open drain power good output actively pulled to ground when FB pin voltage exceeds VPGOOD_ON (2.375 V typ.) and set to high impedance when PG_IN is below VPGOOD_OFF (1.25 V typ.). |+| 6 | PG_IN | input | Power good input with recommended range -0.3 to 3.0 V (internal clamp) used to set PGOOD comparator off-threshold at 1.25 V typ. and connected to output voltage divider. |+| 7 | FB | input | Feedback input to error amplifier with recommended range -0.3 to 3.0 V (internal clamp), internal reference VREF = 2.5 V, overshoot protection threshold at 7% above steady state (VFB_S), and burst-mode activation threshold VFB_FF/EBM at 0.5 V typ. |+| 8 | COMP | output | Error amplifier output with recommended range -0.3 to 5.3 V, burst mode shutdown threshold VCOMP_S at 1 V typ., and external disable threshold VCOMP_DIS at 0.7 V typ. |+| 9 | NC | unconnected | High voltage spacer pin that is not internally connected to isolate high voltage section from low voltage circuitry and ensure PCB creepage distance compliance with safety regulations. |+| 10 | HV | input | High voltage startup and AC sensing input rated to withstand 600 V (operating) or 800 V (absolute maximum) with startup threshold VHV_START at 29 V typ., providing AC line sensing and active X-capacitor discharge function. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SSOP-10 |+| Category | Power Management (PMIC) |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `L4986A`+- Footprint: `Package_SO:SSOP-10_3.9x4.9mm_P1.00mm`+- 3D model: SSOP-10 (KiCad packages3D, STEP)+- 3D model files: `l4986a-etched.step` / `l4986a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l4986a.step` / `l4986a.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079093848195072) (31 pp, sha256 `0bf483ac06ae30e9`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/l4986a-datasheet.pdf)
page.jsonadded+168
@@ -0,0 +1,168 @@+{+  "slug": "l4986a",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics AC-DC Controllers And Regulators, SSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "l4986a",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "l4986a.kicad_sym",+    "l4986a.kicad_mod",+    "l4986a.glb",+    "l4986a.step",+    "l4986a.lbr",+    "docs/hero.png",+    "docs/l4986a-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "L4986A",+    "manufacturer": "STMicroelectronics",+    "package": "SSOP-10",+    "pin_count": 10,+    "category": "Power Management (PMIC)",+    "subcategory": "AC-DC Controllers And Regulators",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079093848195072",+    "parts": {+      "symbol": "l4986a.kicad_sym",+      "footprint": "l4986a.kicad_mod",+      "model_3d": "l4986a-etched.glb",+      "model_3d_plain": "l4986a.glb",+      "model_3d_step": "l4986a-etched.step",+      "model_3d_step_plain": "l4986a.step",+      "lbr": "l4986a.lbr"+    },+    "distributor_links": {+      "lcsc": "C5267797",+      "digikey": "497-L4986A-ND",+      "mouser": "511-L4986A"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T03:31:28Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-L4986A-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-L4986A",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input with recommended operating range -0.3 to 24.5 V (internal clamp at 24.5 V minimum) and maximum supply current 25 mA."+      },+      {+        "number": "2",+        "name": "GD",+        "type": "output",+        "description": "Gate driver output capable of 0.7 A source current and 1.5 A sink current (typical values) for driving power MOSFETs and IGBTs."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "IC ground providing current return for both signal/bias circuitry and gate driver current paths."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "input",+        "description": "Current sense input with recommended range -10 to 3.3 V and internal overcurrent comparator thresholds at VCS_OCP1 (-0.49 V typ.) and VCS_OCP2 (-0.75 V typ.) with zero current detection at VCS_ZCD (-10 mV typical)."+      },+      {+        "number": "5",+        "name": "PG_OUT",+        "type": "output",+        "description": "Open drain power good output actively pulled to ground when FB pin voltage exceeds VPGOOD_ON (2.375 V typ.) and set to high impedance when PG_IN is below VPGOOD_OFF (1.25 V typ.)."+      },+      {+        "number": "6",+        "name": "PG_IN",+        "type": "input",+        "description": "Power good input with recommended range -0.3 to 3.0 V (internal clamp) used to set PGOOD comparator off-threshold at 1.25 V typ. and connected to output voltage divider."+      },+      {+        "number": "7",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to error amplifier with recommended range -0.3 to 3.0 V (internal clamp), internal reference VREF = 2.5 V, overshoot protection threshold at 7% above steady state (VFB_S), and burst-mode activation threshold VFB_FF/EBM at 0.5 V typ."+      },+      {+        "number": "8",+        "name": "COMP",+        "type": "output",+        "description": "Error amplifier output with recommended range -0.3 to 5.3 V, burst mode shutdown threshold VCOMP_S at 1 V typ., and external disable threshold VCOMP_DIS at 0.7 V typ."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "High voltage spacer pin that is not internally connected to isolate high voltage section from low voltage circuitry and ensure PCB creepage distance compliance with safety regulations."+      },+      {+        "number": "10",+        "name": "HV",+        "type": "input",+        "description": "High voltage startup and AC sensing input rated to withstand 600 V (operating) or 800 V (absolute maximum) with startup threshold VHV_START at 29 V typ., providing AC line sensing and active X-capacitor discharge function."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 14,+        "cost_usd": 0.0839,+        "at": "2026-10-01T03:31:09"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603079093848195072",+        "pages": 31,+        "sha256": "0bf483ac06ae30e9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 10,+        "described": 10,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file