main
Ray
l4981ad013tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
37ef0ab
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238
{
"slug": "l4981ad013tr",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics AC-DC Controllers and Regulators, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"l4981ad013tr"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l4981ad013tr.kicad_sym",
"l4981ad013tr.kicad_mod",
"l4981ad013tr.glb",
"l4981ad013tr.step",
"l4981ad013tr.lbr",
"docs/hero.png",
"docs/l4981ad013tr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"l4981ad013tr-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "L4981AD013TR",
"manufacturer": "STMicroelectronics",
"package": "SOIC-20-300mil",
"pin_count": 20,
"category": "AC-DC Controllers and Regulators",
"parts": {
"symbol": "l4981ad013tr.kicad_sym",
"footprint": "l4981ad013tr.kicad_mod",
"model_3d": "l4981ad013tr-etched.glb",
"model_3d_plain": "l4981ad013tr.glb",
"model_3d_step": "l4981ad013tr-etched.step",
"model_3d_step_plain": "l4981ad013tr.step",
"lbr": "l4981ad013tr.lbr"
},
"pins": [
{
"number": "1",
"name": "P-GND",
"type": "power_in",
"description": "Power ground return for the high-current gate-driver output stage. Should be tied to the source of the boost MOSFET and, via a low-impedance star point, back to signal ground (pin 10)."
},
{
"number": "2",
"name": "IPK",
"type": "input",
"description": "Peak current limit sense input. On L4981A a single resistor between pin 2 and the current-sense resistor sets the peak-current threshold; a second resistor to VREF (pin 11) can be added for improved precision. Absolute max -0.3 to 5.5 V (-2 V for t<=1us)."
},
{
"number": "3",
"name": "OVP",
"type": "input",
"description": "Overvoltage protection input. An external resistor divider from the boost output is compared against an internal 5.1 V (typ) reference to clamp the peak output voltage. Absolute max -0.3 to 9 V."
},
{
"number": "4",
"name": "IAC",
"type": "input",
"description": "AC current input. A current proportional to the rectified mains voltage (typically injected through a high-value resistor from the rectified line) is fed into the internal multiplier to generate the current reference. Absolute max input current 5 mA."
},
{
"number": "5",
"name": "CA-OUT",
"type": "output",
"description": "Current amplifier output. An external RC compensation network from this pin to ISENSE (pin 9) sets the current-loop gain and bandwidth. Sink/source ~=20 mA, output range approx. -0.3 to 8.5 V."
},
{
"number": "6",
"name": "LFF",
"type": "input",
"description": "Load feed-forward input. Modulates the multiplier output current in proportion to load for faster transient response; best control between 1.5 V and 5.3 V. If unused, tie to VREF (pin 11). Absolute max -0.3 to 9 V."
},
{
"number": "7",
"name": "VRMS",
"type": "input",
"description": "RMS line-voltage feed-forward input. An external RC low-pass filter from the rectified line produces a DC voltage proportional to line RMS, compensating for input line variations. Recommended operating range 1.5 V to 5.5 V; if unused, tie to VREF (pin 11). Absolute max -0.3 to 9 V."
},
{
"number": "8",
"name": "MULT-OUT",
"type": "output",
"description": "Multiplier output / current amplifier non-inverting input. High-impedance node; must not be pulled below -0.5 V. Absolute max -0.5 to 7 V."
},
{
"number": "9",
"name": "ISENSE",
"type": "input",
"description": "Current amplifier inverting input, connected to the boost inductor current-sense resistor through an input resistor. High-impedance node; do not allow the pin to fall below -0.5 V. Absolute max -0.5 to 7 V."
},
{
"number": "10",
"name": "S-GND",
"type": "power_in",
"description": "Signal (analog) ground. Return for the reference, error/current amplifiers, oscillator, and protection comparators. Kelvin-connect to P-GND (pin 1) at a single star point."
},
{
"number": "11",
"name": "VREF",
"type": "power_out",
"description": "Buffered internal voltage reference output, 5.1 V typ, +/-2% (4.97 to 5.23 V over -25 degC to 85 degC). Internally current-limited, can source up to 10 mA to bias external circuitry (LFF, VRMS, IPK divider, etc.)."
},
{
"number": "12",
"name": "SS",
"type": "output",
"description": "Soft-start pin. An external capacitor to ground is charged by an internal 100 uA (typ) current source, ramping the reference to the error amplifier and setting the soft-start time. Internally discharged during UVLO or overvoltage. Absolute max -0.3 to 9 V."
},
{
"number": "13",
"name": "VA-OUT",
"type": "output",
"description": "Voltage-loop error amplifier output. An external RC network sets the voltage-loop compensation. Output swing typically 0.4 V (low) to ~=6.5 V (high); source/sink capability 2-20 mA. Absolute max -0.3 to 8.5 V."
},
{
"number": "14",
"name": "VFEED",
"type": "input",
"description": "Voltage error amplifier inverting input, driven by a resistive divider from the boost output to set the regulated DC bus voltage. Internally referenced to VREF (5.1 V). Absolute max -0.3 to 9 V."
},
{
"number": "15",
"name": "P-UVLO",
"type": "input",
"description": "Programmable under-voltage lockout threshold input. A resistor divider from VCC (or the bootstrap supply) programs the turn-on threshold with hysteresis. Absolute max -0.3 to 7 V."
},
{
"number": "16",
"name": "SYNC",
"type": "bidirectional",
"description": "L4981A synchronization I/O (CMOS logic compatible). As SYNC-in, a rectangular clock applied at this pin synchronizes the internal oscillator (VIH >= 3.5 V, VIL <= 0.9 V, pulse width >= 800 ns). As SYNC-out, the internal oscillator emits a ~=0.3-0.8 us wide clock pulse to synchronize other devices. Absolute max -0.3 to 7 V."
},
{
"number": "17",
"name": "ROSC",
"type": "passive",
"description": "Oscillator timing resistor. An external resistor to ground (typ 24 kOhm) sets the constant charging current for COSC. Absolute max -0.3 to 3 V."
},
{
"number": "18",
"name": "COSC",
"type": "passive",
"description": "Oscillator timing capacitor. An external capacitor to ground (typ 1 nF with ROSC = 24 kOhm gives ~=100 kHz) sets the switching frequency. Peak-charge current ~=0.55 mA, discharge ~=11.5 mA. Absolute max -0.3 to 7 V, sink 15 mA."
},
{
"number": "19",
"name": "VCC",
"type": "power_in",
"description": "Chip supply input (self-limited to <= 50 mA). Typical operating range up to 19.5 V; the device features low start-up current (0.3 mA typ) so it can be bootstrapped from the rectified mains through a resistor and held up by an auxiliary winding."
},
{
"number": "20",
"name": "GDRV",
"type": "output",
"description": "Gate driver output. Bipolar-plus-DMOS totem-pole stage delivering >1 A source and up to 2 A sink peak (t = 1 us) to drive the boost power MOSFET or IGBT. Peak gate-drive voltage -1 V min (t = 0.1 us)."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C37111",
"digikey": "497-4562-2-ND",
"mouser": "511-L4981AD013TR"
},
"distributor_check": {
"checked_at": "2026-10-05T19:02:25Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "497-4562-2-ND",
"status": "found"
},
"mouser": {
"pn": "511-L4981AD013TR",
"status": "found"
}
},
"models_3d": [
{
"file": "l4981ad013tr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
12.8,
2.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "l4981ad013tr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
12.8,
2.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9ce2b1131ce61a2e63f6b03f989bd4abc9a00ffd07cf891b56d36a41ef9e4ed2",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}