3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL4931ABDT33-TR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DPAK
L4931ABDT33-TR from STMicroelectronics, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin (3.3 V nominal for this AB/±1% version); output current up to 250 mA, requires a 2.2 µF output capacitor for stability. |
| 2 | GND | power_in | Ground reference pin, physically formed by the package mounting tab shown on the left side of the DPAK outline. |
| 3 | VIN | power_in | Unregulated DC input supply pin, operating input voltage up to 20 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DPAK |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VO | 3.267 | 3.3 | 3.333 | V | IO = 5 mA, VI = 5.3 V | 7 |
| Output voltage over temperature | VO | 3.234 | 3.366 | V | IO = 5 mA, VI = 5.3 V, TA = -25 to 85 °C | 7 | |
| Operating input voltage | VI | 20 | V | IO = 250 mA | 7 | ||
| Line regulation | ∆VO | 3 | 15 | mV | VI = 4 to 20 V, IO = 0.5 mA | 7 | |
| Load regulation | ∆VO | 3 | 15 | mV | VI = 4.2 V, IO = 0.5 to 250 mA | 7 | |
| Quiescent current ON mode | Id | 0.6 | 1 | mA | VI = 4.2 to 20 V, IO = 0 mA | 7 | |
| Quiescent current ON mode at full load | Id | 4 | 6 | mA | VI = 4.2 to 20 V, IO = 250 mA | 7 | |
| Quiescent current OFF mode | Id | 50 | 100 | µA | VI = 6 V | 7 | |
| Dropout voltage | Vd | 0.4 | 0.6 | V | IO = 250 mA | 7 | |
| Dropout voltage over temperature | Vd | 0.8 | V | IO = 250 mA, TA = -40 to 125 °C | 7 | ||
| Control input logic low | VIL | 0.8 | V | TA = -40 to 125 °C | 7 | ||
| Control input logic high | VIH | 2 | V | TA = -40 to 125 °C | 7 | ||
| Control input current | II | 10 | µA | VI = 6 V, VC = 6 V | 7 | ||
| Output bypass capacitance | CO | 2 | 10 | µF | ESR = 0.1 to 10 Ω, IO = 0 to 250 mA | 7 | |
| Output current limit | Iout | 300 | mA | 7 | |||
| Output noise voltage | eN | 50 | µV | B = 10 Hz to 100 kHz | 7 | ||
| Supply voltage rejection f=120 Hz | SVR | 73 | dB | IO = 5 mA, VI = 5.2 ± 1 V, f = 120 Hz | 7 | ||
| Supply voltage rejection f=1 kHz | SVR | 70 | dB | IO = 5 mA, VI = 5.2 ± 1 V, f = 1 kHz | 7 | ||
| Supply voltage rejection f=10 kHz | SVR | 55 | dB | IO = 5 mA, VI = 5.2 ± 1 V, f = 10 kHz | 7 | ||
| DC input voltage | VI | 20 | V | 5 | |||
| Storage temperature range | TSTG | -40 | 150 | °C | 5 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 5 | ||
| Thermal resistance junction-ambient (DPAK) | RthJA | 100 | °C/W | DPAK column | 5 |
CAD (KiCad official)
- Symbol:
L4931ABDT33-TR - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: DPAK (KiCad packages3D, STEP)
- 3D model files:
l4931abdt33-tr-etched.step/l4931abdt33-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l4931abdt33-tr.step/l4931abdt33-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (32 pp, sha256
42bf56a6e95ed577, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).