main
Ray
kx022-1020: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ae6eab3
KX022-1020
ROHM · Attitude Sensor/Gyroscope · LGA-12(2x2)
KX022-1020 from ROHM, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/ADDR | bidirectional | Serial Data Out during 4-wire SPI communication; also selects the least-significant bit of the device I2C slave address (ADDR) when the part is used in I2C mode. |
| 2 | SDI/SDA | bidirectional | SPI serial data input (SDI) in SPI mode; bidirectional I2C serial data line (SDA) in I2C mode. Requires an external pull-up (min 1.5 kΩ) to IO_VDD for I2C operation. |
| 3 | IO_VDD | power_in | Power supply input for the digital communication I/O pads. Operating range 1.7 V to VDD. Optionally decoupled to GND with a 0.1 µF ceramic capacitor. |
| 4 | TRIG | input | External trigger input for the FIFO sample buffer (used in Trigger buffer mode). Tie to GND when the external trigger feature is not used. |
| 5 | INT1 | output | Physical programmable interrupt output 1. Polarity, latch behavior, and source events are configured via the INC1/INC4 registers. Leave floating if unused. |
| 6 | INT2 | output | Physical programmable interrupt output 2. Polarity, latch behavior, and source events are configured via the INC5/INC6 registers. Leave floating if unused. |
| 7 | VDD | power_in | Main analog supply input (1.71 V to 3.6 V, 2.5 V typical). Decouple to GND with a 0.1 µF ceramic capacitor. |
| 8 | GND | power_in | Device ground return. |
| 9 | GND | power_in | Device ground return (second GND pin). |
| 10 | nCS | input | Chip-select / interface-mode select. Tie to GND to enable SPI (and disable I2C); tie to IO_VDD to enable I2C (and disable SPI). Must not be left floating. |
| 11 | NC | unconnected | No internal connection. May be tied to VDD, IO_VDD, GND, or left floating. |
| 12 | SCLK/SCL | input | Serial clock input for both SPI (SCLK, up to 10 MHz) and I2C (SCL, up to 3.4 MHz in HS-mode) communication. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM |
| Package | LGA-12(2x2) |
| Category | Sensor |
| Pins | 12 |
Ordering variants
KX022-1020
CAD (KiCad official)
- Symbol:
KX022-1020 - Footprint:
Package_LGA:LGA-12_2x2mm_P0.5mm - 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
- 3D model files:
kx022-1020-etched.step/kx022-1020-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kx022-1020.step/kx022-1020.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM datasheet (None pp, sha256
307cc90d6fb87654, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KX022-1020
**ROHM** · Attitude Sensor/Gyroscope · LGA-12(2x2)
KX022-1020 from ROHM, in a LGA-12(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDO/ADDR | bidirectional | Serial Data Out during 4-wire SPI communication; also selects the least-significant bit of the device I2C slave address (ADDR) when the part is used in I2C mode. |
| 2 | SDI/SDA | bidirectional | SPI serial data input (SDI) in SPI mode; bidirectional I2C serial data line (SDA) in I2C mode. Requires an external pull-up (min 1.5 kΩ) to IO_VDD for I2C operation. |
| 3 | IO_VDD | power_in | Power supply input for the digital communication I/O pads. Operating range 1.7 V to VDD. Optionally decoupled to GND with a 0.1 µF ceramic capacitor. |
| 4 | TRIG | input | External trigger input for the FIFO sample buffer (used in Trigger buffer mode). Tie to GND when the external trigger feature is not used. |
| 5 | INT1 | output | Physical programmable interrupt output 1. Polarity, latch behavior, and source events are configured via the INC1/INC4 registers. Leave floating if unused. |
| 6 | INT2 | output | Physical programmable interrupt output 2. Polarity, latch behavior, and source events are configured via the INC5/INC6 registers. Leave floating if unused. |
| 7 | VDD | power_in | Main analog supply input (1.71 V to 3.6 V, 2.5 V typical). Decouple to GND with a 0.1 µF ceramic capacitor. |
| 8 | GND | power_in | Device ground return. |
| 9 | GND | power_in | Device ground return (second GND pin). |
| 10 | nCS | input | Chip-select / interface-mode select. Tie to GND to enable SPI (and disable I2C); tie to IO_VDD to enable I2C (and disable SPI). Must not be left floating. |
| 11 | NC | unconnected | No internal connection. May be tied to VDD, IO_VDD, GND, or left floating. |
| 12 | SCLK/SCL | input | Serial clock input for both SPI (SCLK, up to 10 MHz) and I2C (SCL, up to 3.4 MHz in HS-mode) communication. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM |
| Package | LGA-12(2x2) |
| Category | Sensor |
| Pins | 12 |
## Ordering variants
- `KX022-1020`
## CAD (KiCad official)
- Symbol: `KX022-1020`
- Footprint: `Package_LGA:LGA-12_2x2mm_P0.5mm`
- 3D model: LGA-12(2x2) (KiCad packages3D, STEP)
- 3D model files: `kx022-1020-etched.step` / `kx022-1020-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kx022-1020.step` / `kx022-1020.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ROHM datasheet](docs/kx022-1020-datasheet.pdf) (None pp, sha256 `307cc90d6fb87654`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/kx022-1020-datasheet.pdf)