KTY10-7
Public Made by Adomby adom
Infineon Technologies Sensors, Transducers, TO-226-2, TO-92-2 (TO-226AC). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
19ff3f3
KTY10-7
Infineon Technologies · Sensors, Transducers · TO-226-2, TO-92-2 (TO-226AC)
KTY10-7 from Infineon Technologies, in a TO-226-2, TO-92-2 (TO-226AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One of the two symmetrical sensor terminals, which may be used with either polarity, with a maximum operating voltage of 25 V (TA ≤ 25 °C, t ≤ 10 ms). |
| 2 | 2 | passive | The other symmetrical sensor terminal, which may be used with either polarity, with a maximum operating voltage of 25 V (TA ≤ 25 °C, t ≤ 10 ms). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | TO-226-2, TO-92-2 (TO-226AC) |
| Category | Sensors, Transducers |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensor resistance R25 (min) | R25 | 2010 | Ω | Iop = 1 mA | 2 | ||
| Sensor resistance R25 (max) | R25 | 2050 | Ω | Iop = 1 mA | 2 | ||
| Maximum operating voltage | Vopmax | 25 | V | TA ≤ 25 °C, t ≤ 10 ms | 3 | ||
| Maximum operating current | Iopmax | 5 | mA | 3 | |||
| Peak operating current | Iopp | 7 | mA | TA ≤ 25 °C, t ≤ 10 ms | 3 | ||
| Operating temperature range | Top | -50 | 150 | °C | 3 | ||
| Storage temperature range | Tstg | -50 | 150 | °C | 3 | ||
| Thermal time constant τair (63% of ΔT) | τair | 40 | s | in air, KTY 10-x | 3 | ||
| Thermal time constant τoil (63% of ΔT) | τoil | 4 | s | in oil, KTY 10-x | 3 | ||
| Temperature factor kT | kT | 0.506 | 0.518 | 0.53 | TA = -50 °C | 5 | |
| Temperature factor kT | kT | 0.559 | 0.57 | 0.581 | TA = -40 °C | 5 | |
| Temperature factor kT | kT | 0.615 | 0.625 | 0.635 | TA = -30 °C | 5 | |
| Temperature factor kT | kT | 0.676 | 0.685 | 0.694 | TA = -20 °C | 5 | |
| Temperature factor kT | kT | 0.741 | 0.748 | 0.755 | TA = -10 °C | 5 | |
| Temperature factor kT | kT | 0.81 | 0.815 | 0.821 | TA = 0 °C | 5 | |
| Temperature factor kT | kT | 0.883 | 0.886 | 0.89 | TA = 10 °C | 5 | |
| Temperature factor kT | kT | 0.96 | 0.961 | 0.962 | TA = 20 °C | 5 | |
| Temperature factor kT | kT | 1.039 | 1.04 | 1.041 | TA = 30 °C | 5 | |
| Temperature factor kT | kT | 1.119 | 1.123 | 1.126 | TA = 40 °C | 5 | |
| Temperature factor kT | kT | 1.204 | 1.209 | 1.215 | TA = 50 °C | 5 | |
| Temperature factor kT | kT | 1.291 | 1.3 | 1.308 | TA = 60 °C | 5 | |
| Temperature factor kT | kT | 1.383 | 1.394 | 1.405 | TA = 70 °C | 5 | |
| Temperature factor kT | kT | 1.478 | 1.492 | 1.506 | TA = 80 °C | 5 | |
| Temperature factor kT | kT | 1.577 | 1.594 | 1.611 | TA = 90 °C | 5 | |
| Temperature factor kT | kT | 1.68 | 1.7 | 1.72 | TA = 100 °C | 5 | |
| Temperature factor kT | kT | 1.786 | 1.81 | 1.833 | TA = 110 °C | 5 | |
| Temperature factor kT | kT | 1.896 | 1.923 | 1.951 | TA = 120 °C | 5 | |
| Temperature factor kT | kT | 2.01 | 2.041 | 2.072 | TA = 130 °C | 5 | |
| Temperature factor kT | kT | 2.093 | 2.128 | 2.163 | TA = 140 °C | 5 | |
| Temperature factor kT | kT | 2.196 | 2.235 | 2.274 | TA = 150 °C | 5 | |
| Temperature factor kT (normalising point) | kT | 1 | TA = 25 °C | 5 |
CAD (Adom-generated)
- Symbol:
KTY10-7 - Footprint:
Adom_Gen:Infineon_Technologies_KTY10 - 3D model: generated to fit the land (STEP)
- 3D model files:
kty10-7-etched.step/kty10-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kty10-7.step/kty10-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (11 pp, sha256
8b80ad2036ad4263, retrieved 2026-11-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
# KTY10-7
**Infineon Technologies** · Sensors, Transducers · TO-226-2, TO-92-2 (TO-226AC)
KTY10-7 from Infineon Technologies, in a TO-226-2, TO-92-2 (TO-226AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One of the two symmetrical sensor terminals, which may be used with either polarity, with a maximum operating voltage of 25 V (TA ≤ 25 °C, t ≤ 10 ms). |
| 2 | 2 | passive | The other symmetrical sensor terminal, which may be used with either polarity, with a maximum operating voltage of 25 V (TA ≤ 25 °C, t ≤ 10 ms). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | TO-226-2, TO-92-2 (TO-226AC) |
| Category | Sensors, Transducers |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensor resistance R25 (min) | R25 | 2010 | | | Ω | Iop = 1 mA | 2 |
| Sensor resistance R25 (max) | R25 | | | 2050 | Ω | Iop = 1 mA | 2 |
| Maximum operating voltage | Vopmax | | | 25 | V | TA ≤ 25 °C, t ≤ 10 ms | 3 |
| Maximum operating current | Iopmax | | | 5 | mA | | 3 |
| Peak operating current | Iopp | | | 7 | mA | TA ≤ 25 °C, t ≤ 10 ms | 3 |
| Operating temperature range | Top | -50 | | 150 | °C | | 3 |
| Storage temperature range | Tstg | -50 | | 150 | °C | | 3 |
| Thermal time constant τair (63% of ΔT) | τair | | 40 | | s | in air, KTY 10-x | 3 |
| Thermal time constant τoil (63% of ΔT) | τoil | | 4 | | s | in oil, KTY 10-x | 3 |
| Temperature factor kT | kT | 0.506 | 0.518 | 0.53 | | TA = -50 °C | 5 |
| Temperature factor kT | kT | 0.559 | 0.57 | 0.581 | | TA = -40 °C | 5 |
| Temperature factor kT | kT | 0.615 | 0.625 | 0.635 | | TA = -30 °C | 5 |
| Temperature factor kT | kT | 0.676 | 0.685 | 0.694 | | TA = -20 °C | 5 |
| Temperature factor kT | kT | 0.741 | 0.748 | 0.755 | | TA = -10 °C | 5 |
| Temperature factor kT | kT | 0.81 | 0.815 | 0.821 | | TA = 0 °C | 5 |
| Temperature factor kT | kT | 0.883 | 0.886 | 0.89 | | TA = 10 °C | 5 |
| Temperature factor kT | kT | 0.96 | 0.961 | 0.962 | | TA = 20 °C | 5 |
| Temperature factor kT | kT | 1.039 | 1.04 | 1.041 | | TA = 30 °C | 5 |
| Temperature factor kT | kT | 1.119 | 1.123 | 1.126 | | TA = 40 °C | 5 |
| Temperature factor kT | kT | 1.204 | 1.209 | 1.215 | | TA = 50 °C | 5 |
| Temperature factor kT | kT | 1.291 | 1.3 | 1.308 | | TA = 60 °C | 5 |
| Temperature factor kT | kT | 1.383 | 1.394 | 1.405 | | TA = 70 °C | 5 |
| Temperature factor kT | kT | 1.478 | 1.492 | 1.506 | | TA = 80 °C | 5 |
| Temperature factor kT | kT | 1.577 | 1.594 | 1.611 | | TA = 90 °C | 5 |
| Temperature factor kT | kT | 1.68 | 1.7 | 1.72 | | TA = 100 °C | 5 |
| Temperature factor kT | kT | 1.786 | 1.81 | 1.833 | | TA = 110 °C | 5 |
| Temperature factor kT | kT | 1.896 | 1.923 | 1.951 | | TA = 120 °C | 5 |
| Temperature factor kT | kT | 2.01 | 2.041 | 2.072 | | TA = 130 °C | 5 |
| Temperature factor kT | kT | 2.093 | 2.128 | 2.163 | | TA = 140 °C | 5 |
| Temperature factor kT | kT | 2.196 | 2.235 | 2.274 | | TA = 150 °C | 5 |
| Temperature factor kT (normalising point) | kT | | 1 | | | TA = 25 °C | 5 |
## CAD (Adom-generated)
- Symbol: `KTY10-7`
- Footprint: `Adom_Gen:Infineon_Technologies_KTY10`
- 3D model: generated to fit the land (STEP)
- 3D model files: `kty10-7-etched.step` / `kty10-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `kty10-7.step` / `kty10-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](https://rocelec.widen.net/content/qxp2nqwwr1/original/INFNS04262-1.pdf?u=5oefqw&download=true) (11 pp, sha256 `8b80ad2036ad4263`, retrieved 2026-11-03, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.
[Datasheet PDF](docs/kty10-7-datasheet.pdf)